 Vector calculus

Vector calculus (or vector analysis) is a branch of mathematics concerned with differentiation and integration of vector fields, primarily in 3 dimensional Euclidean space The term "vector calculus" is sometimes used as a synonym for the broader subject of multivariable calculus, which includes vector calculus as well as partial differentiation and multiple integration. Vector calculus plays an important role in differential geometry and in the study of partial differential equations. It is used extensively in physics and engineering, especially in the description of electromagnetic fields, gravitational fields and fluid flow.
Vector calculus was developed from quaternion analysis by J. Willard Gibbs and Oliver Heaviside near the end of the 19th century, and most of the notation and terminology was established by Gibbs and Edwin Bidwell Wilson in their 1901 book, Vector Analysis. In the traditional form using cross products, vector calculus does not generalize to higher dimensions, while the alternative approach of geometric algebra, which uses exterior products does generalize, as discussed below.
Contents
Basic objects
The basic objects in vector calculus are scalar fields (scalarvalued functions) and vector fields (vectorvalued functions). These are then combined or transformed under various operations, and integrated. In more advanced treatments, one further distinguishes pseudovector fields and pseudoscalar fields, which are identical to vector fields and scalar fields except that they change sign under an orientationreversing map: for example, the curl of a vector field is a pseudovector field, and if one reflects a vector field, the curl points in the opposite direction. This distinction is clarified and elaborated in geometric algebra, as described below.
Vector operations
Algebraic operations
The basic algebraic (nondifferential) operations in vector calculus are referred to as vector algebra, being defined for a vector space and then globally applied to a vector field, and consist of:
 scalar multiplication
 multiplication of a scalar field and a vector field, yielding a vector field: ;
 vector addition
 addition of two vector fields, yielding a vector field: ;
 dot product
 multiplication of two vector fields, yielding a scalar field: ;
 cross product
 multiplication of two vector fields, yielding a vector field: .
There are also two triple products: the scalar triple product and the vector triple product, but these are less used.
Differential operations
Vector calculus studies various differential operators defined on scalar or vector fields, which are typically expressed in terms of the del operator (). The four most important differential operations in vector calculus are:
Operation Notation Description Domain/Range Gradient Measures the rate and direction of change in a scalar field. Maps scalar fields to vector fields. Curl Measures the tendency to rotate about a point in a vector field. Maps vector fields to (pseudo)vector fields. Divergence Measures the magnitude of a source or sink at a given point in a vector field. Maps vector fields to scalar fields. Laplacian A composition of the divergence and gradient operations. Maps scalar fields to scalar fields. where the curl and divergence differ because the former uses a cross product and the latter a dot product, and f denotes a scalar field and F denotes a vector field. A quantity called the Jacobian is useful for studying functions when both the domain and range of the function are multivariable, such as a change of variables during integration.
Theorems
Likewise, there are several important theorems related to these operators which generalize the fundamental theorem of calculus to higher dimensions:
Theorem Statement Description Gradient theorem The line integral through a gradient (vector) field equals the difference in its scalar field at the endpoints of the curve L. Green's theorem The integral of the scalar curl of a vector field over some region in the plane equals the line integral of the vector field over the closed curve bounding the region. Stokes' theorem The integral of the curl of a vector field over a surface in equals the line integral of the vector field over the closed curve bounding the surface. Divergence theorem The integral of the divergence of a vector field over some solid equals the integral of the flux through the closed surface bounding the solid. Generalizations
Different 3manifolds
Vector calculus is initially defined for Euclidean 3space, which has additional structure beyond simply being a 3dimensional real vector space, namely: an inner product (the dot product), which gives a notion of length (and hence angle), and an orientation, which gives a notion of lefthanded and righthanded. These structures give rise to a volume form, and also the cross product, which is used pervasively in vector calculus.
The gradient and divergence only require the inner product, while the curl and the cross product also requires the handedness of the coordinate system to be taken into account (see cross product and handedness for more detail).
Vector calculus can be defined on other 3dimensional real vector spaces if they have an inner product (or more generally a symmetric nondegenerate form) and an orientation; note that this is less data than an isomorphism to Euclidean space, as it does not require a set of coordinates (a frame of reference), which reflects the fact that vector calculus is invariant under rotations (the special orthogonal group SO(3)).
More generally, vector calculus can be defined on any 3dimensional oriented Riemannian manifold, or more generally pseudoRiemannian manifold. This structure simply means that the tangent space at each point has an inner product (more generally, a symmetric nondegenerate form) and an orientation, or more globally that there is a symmetric nondegenerate metric tensor and an orientation, and works because vector calculus is defined in terms of tangent vectors at each point.
Other dimensions
Most of the analytic results are easily understood, in a more general form, using the machinery of differential geometry, of which vector calculus forms a subset. Grad and div generalize immediately to other dimensions, as do the gradient theorem, divergence theorem, and Laplacian (yielding harmonic analysis), while curl and cross product do not generalize as directly.
From a general point of view, the various fields in (3dimensional) vector calculus are uniformly seen as being kvector fields: scalar fields are 0vector fields, vector fields are 1vector fields, pseudovector fields are 2vector fields, and pseudoscalar fields are 3vector fields. In higher dimensions there are additional types of fields (scalar/vector/pseudovector/pseudoscalar corresponding to 0/1/n−1/n dimensions, which is exhaustive in dimension 3), so one cannot only work with (pseudo)scalars and (pseudo)vectors.
In any dimension, assuming a nondegenerate form, grad of a scalar function is a vector field, and div of a vector field is a scalar function, but only in dimension 3 and 7[1] (and, trivially, dimension 0) is the curl of a vector field a vector field, and only in 3 or 7 dimensions can a cross product be defined (generalizations in other dimensionalities either require n − 1 vectors to yield 1 vector, or are alternative Lie algebras, which are more general antisymmetric bilinear products). The generalization of grad and div, and how curl may be generalized is elaborated at Curl: Generalizations; in brief, the curl of a vector field is a bivector field, which may be interpreted as the special orthogonal Lie algebra of infinitesimal rotations; however, this cannot be identified with a vector field because the dimensions differ  there are 3 dimensions of rotations in 3 dimensions, but 6 dimensions of rotations in 4 dimensions (and more generally dimensions of rotations in n dimensions).
There are two important alternative generalizations of vector calculus. The first, geometric algebra, uses kvector fields instead of vector fields (in 3 or fewer dimensions, every kvector field can be identified with a scalar function or vector field, but this is not true in higher dimensions). This replaces the cross product, which is specific to 3 dimensions, taking in two vector fields and giving as output a vector field, with the exterior product, which exists in all dimensions and takes in two vector fields, giving as output a bivector (2vector) field. This product yields Clifford algebras as the algebraic structure on vector spaces (with an orientation and nondegenerate form). Geometric algebra is mostly used in generalizations of physics and other applied fields to higher dimensions.
The second generalization uses differential forms (kcovector fields) instead of vector fields or kvector fields, and is widely used in mathematics, particularly in differential geometry, geometric topology, and harmonic analysis, in particular yielding Hodge theory on oriented pseudoRiemannian manifolds. From this point of view, grad, curl, and div correspond to the differential of 0forms, 1forms, and 2forms, respectively, and the key theorems of vector calculus are all special cases of the general form of Stokes' theorem.
From the point of view of both of these generalizations, vector calculus implicitly identifies mathematically distinct objects, which makes the presentation more elegant but the underlying mathematical structure and generalizations less clear. From the point of view of geometric algebra, vector calculus implicitly identifies kvector fields with vector fields or scalar functions: 0vectors and 3vectors with scalars, 1vectors and 2vectors with vectors. From the point of view of differential forms, vector calculus implicitly identifies kforms with scalar fields or vector fields: 0forms and 3forms with scalar fields, 1forms and 2forms with vector fields. Thus for example the curl naturally takes as input a vector field, but naturally has as output a 2vector field or 2form (hence pseudovector field), which is then interpreted as a vector field, rather than directly taking a vector field to a vector field; this is reflected in the curl of a vector field in higher dimensions not having as output a vector field.
See also
 Vector calculus identities
 Del in cylindrical and spherical coordinates
 Directional derivative
 Irrotational vector field
 Solenoidal vector field
 Laplacian vector field
 Helmholtz decomposition
 Orthogonal coordinates
 Skew coordinates
 Curvilinear coordinates
 Tensor
References
 Michael J. Crowe (1967). A History of Vector Analysis : The Evolution of the Idea of a Vectorial System. Dover Publications; Reprint edition. ISBN 0486679101.
 H. M. Schey (2005). Div Grad Curl and all that: An informal text on vector calculus. W. W. Norton & Company. ISBN 0393925161.
 J.E. Marsden (1976). Vector Calculus. W. H. Freeman & Company. ISBN 0716704625.
 ChenTo Tai (1995). A historical study of vector analysis. Technical Report RL 915, Radiation Laboratory, University of Michigan.
External links
 Vector Calculus Video Lectures from University of New South Wales on Academic Earth
 A survey of the improper use of ∇ in vector analysis (1994) Tai, Chen
 Expanding vector analysis to an oblique coordinate system
 Vector Analysis: A Textbook for the Use of Students of Mathematics and Physics, (based upon the lectures of Willard Gibbs) by Edwin Bidwell Wilson, published 1902.
 Earliest Known Uses of Some of the Words of Mathematics: Vector Analysis
Categories:
Wikimedia Foundation. 2010.