James-Stein estimator

The James-Stein estimator is a nonlinear estimator which can be shown to dominate, or outperform, the "ordinary" (least squares) technique. As such, it is the best-known example of Stein's phenomenon.

An earlier version of the estimator was developed by Charles Stein, and is sometimes referred to as Stein's estimator.Citation
last = Stein | first = C.
author-link = Charles Stein
contribution = Inadmissibility of the usual estimator for the mean of a multivariate distribution
title = Proc. Third Berkeley Symp. Math. Statist. Prob.
year = 1956
volume = 1
pages = 197-206
url = http://projecteuclid.org/euclid.bsmsp/1200501656] The result was improved by James and Stein.Citation
last = James | first = W.
last2 = Stein | first2 = C. | author2-link = Charles Stein
contribution = Estimation with quadratic loss
title = Proc. Fourth Berkeley Symp. Math. Statist. Prob.
year = 1961
volume = 1
pages = 361-379
url = http://projecteuclid.org/euclid.bsmsp/1200512173]

Setting

Suppose "θ" is an unknown parameter vector of length $m$, and let y be a vector of observations of "θ" (also of length $m$), such that

:

We are interested in obtaining an estimate of "θ", based on the observations y.

This is an everyday situation in which a set of parameters is measured, and the measurements are corrupted by independent Gaussian noise. Since the noise has zero mean, it is very reasonable to use the measurements themselves as an estimate of the parameters. This is the approach of the least squares estimator, which simply equals in this case.

As a result, there was considerable shock and disbelief when Stein demonstrated that, in terms of mean squared error , this approach is suboptimal. The result became known as Stein's phenomenon.

The James-Stein estimator

The James-Stein estimator is given by

:

James and Stein showed that the above estimator dominates for any $m\; ge\; 3$, meaning that the James-Stein estimator always achieves lower MSE than the least squares estimator.Citation
first = E. L. | last = Lehmann
first2 = G. | last2 = Casella
year = 1998
title = Theory of Point Estimation
edition = 2nd
address = New York
publisher = Springer]

Notice that if then this estimator simply takes the natural estimator y and shrinks it towards the origin 0. In fact this is not the only direction of shrinkage that works. Let "ν" be an arbitrary fixed vector of length $m$. Then there exists a James-Stein estimator that shrinks toward "ν", namely

:

It is interesting to note that the James-Stein estimator dominates the usual estimator for any "ν". A natural question to ask is whether the improvement over the usual estimator is independent of the choice of "ν". The answer is no. The improvement is small if is large. Thus to get a very great improvement some knowledge of the location of "θ" is necessary. Of course this is the quantity we are trying to estimate so we don't have this knowledge a priori. But we may have some guess as to what the mean vector is. This can be considered a disadvantage of the estimator because the choice is not objective, it depends on the beliefs of the researcher.

Stein has shown that, for $m\; le\; 2$, the least squares estimator is admissible, meaning that no estimator dominates it.

Interpretation

A consequence of the above discussion is the following counterintuitive result: When three or more unrelated parameters are measured, their total MSE can be reduced by using a combined estimator such as the James-Stein estimator; whereas when each parameter is estimated separately, the least squares (LS) estimator is admissible. This quirk has caused some to sarcastically ask whether, in order to estimate the speed of light, one should jointly estimate tea consumption in Taiwan and hog weight in Montana. The response is that the James-Stein estimator always improves upon the "total" MSE, i.e., the sum of the expected errors of each component. Therefore, the total MSE in measuring light speed, tea consumption and hog weight would improve by using the James-Stein estimator. However, any particular component (such as the speed of light) would improve for some parameter values, and deteriorate for others. Thus, although the James-Stein estimator dominates the LS estimator when three or more parameters are estimated, any single component does not dominate the respective component of the LS estimator.

The conclusion from this hypothetical example is that measurements should be combined if one is interested in minimizing their total MSE. For example, in a telecommunication setting, it is reasonable to combine channel tap measurements in a channel estimation scenario, as the goal is to minimize the total channel estimation error. Conversely, it is probably not reasonable to combine channel estimates of different users, since no user would want their channel estimate to deteriorate in order to improve the average network performance.

Improvements

The basic James-Stein estimator has the peculiar property that for small values of the multiplier on is actually negative. This can be easily remedied by replacing this multiplier by zero when it is negative. The resulting estimator is called the "positive-part James-Stein estimator" and is given by

:

This estimator has a smaller risk than the basic James-Stein estimator. It follows that the basic James-Stein estimator is itself inadmissible.Citation
first = T. W. | last = Anderson
year = 1984
title = An Introduction to Multivariate Statistical Analysis
edition = 2nd
address = New York
publisher = John Wiley & Sons]

It turns out, however, that the positive-part estimator is also inadmissible. This follows from a general result which requires admissible estimators to be smooth.

Extensions

The James-Stein estimator may seem at first sight to be a result of some peculiarity of the problem setting. In fact, the estimator exemplifies a very wide-ranging effect, namely, the fact that the "ordinary" or least squares estimator is often inadmissible for simultaneous estimation of several parameters. This effect has been called Stein's phenomenon, and has been demonstrated for several different problem settings, some of which are briefly outlined below.
* James and Stein demonstrated that the estimator presented above can still be used when the variance $sigma^2$ is unknown, by replacing it with the standard estimator of the variance, $widehat\{sigma\}^2\; =\; frac\{1\}\{n\}sum\; (\; y\_i-overline\{y\}\; )^2$. The dominance result still holds under the same condition, namely, $m\; >\; 2$.
* Bock extended the work of James and Stein to the case of a general measurement covariance matrix, i.e., where measurements may be statistically dependent and may have differing variances. A similar dominating estimator can be constructed, with a suitably generalized dominance condition. This can be used to construct a linear regression technique which outperforms the standard application of the LS estimator.Citation
last = Bock | first = M. E.
year = 1975
title = Minimax estimators of the mean of a multivariate distribution.
journal = Ann. Statist.
volume = 3
issue = 1
pages 209-218]
* Stein's result was substantially extended by Brown to a wide class of distributions and loss functions. However, his theorem is an existence result only, in that explicit dominating estimators were not actually exhibited.Citation
last = Brown | first = L. D.
year = 1966
title = On the admissibility of invariant estimators of one or more location parameters
journal = Ann. Math. Statist.
volume = 37
pages = 1087-1136] It is quite difficult to obtain explicit estimators improving upon the usual estimator without specific restrictions on the underlying distributions.

See also

* Stein's phenomenon
* Admissible decision rule
* Decision theory
* Estimation theory

References

*