Tooth enamel

Tooth enamel
Tooth enamel
Labeledmolar.jpg
Labeled molar
Latin enamelum
Code TA A05.1.03.056

Tooth enamel, along with dentin, cementum, and dental pulp is one of the four major tissues that make up the tooth in vertebrates. It is the hardest and most highly mineralized substance in the human body.[1] Tooth enamel is also found in the dermal denticles of sharks. It is the normally visible dental tissue of a tooth because it covers the anatomical crown and must be supported by underlying dentin. Ninety-six percent of enamel consists of mineral, with water and organic material composing the rest.[2] In humans, enamel varies in thickness over the surface of the tooth, often thickest at the cusp, up to 2.5 mm, and thinnest at its border with the cementum at the cementoenamel junction (CEJ).[3]

The normal color of enamel varies from light yellow to grayish white. At the edges of teeth where there is no dentin underlying the enamel, the color sometimes has a slightly blue tone. Since enamel is semitranslucent, the color of dentin and any material underneath the enamel strongly affects the appearance of a tooth. The enamel on primary teeth has a more opaque crystalline form and thus appears whiter than on permanent teeth.

Enamel's primary mineral is hydroxylapatite, which is a crystalline calcium phosphate.[4] The large amount of minerals in enamel accounts not only for its strength but also for its brittleness.[5] Tooth enamel ranks 5 on Mohs hardness scale and a Young's modulus of 83 GPa.[4] Dentin, less mineralized and less brittle, 3–4 in hardness, compensates for enamel and is necessary as a support.[6] On radiographs, the differences in the mineralization of different portions of the tooth and surrounding periodontium can be noted; enamel appears more radiopaque (or lighter) than either dentin and pulp since it is denser than both, both of which appear more radiolucent (or darker).[7]

Enamel does not contain collagen, as found in other hard tissues such as dentin and bone, but it does contain two unique classes of proteins - amelogenins and enamelins. While the role of these proteins is not fully understood, it is believed that they aid in the development of enamel by serving as a framework for minerals to form on, among other functions.[8] Once it is mature, enamel is almost totally absent of the softer organic matter. Enamel is avascular and has no nerve supply within it and is not renewed, however, it is not a static tissue as it can undergo mineralization changes.[9]

Contents

Structure

Labeledandfulltooth.jpg

The basic unit of enamel is called an enamel rod.[6] Measuring 4–8 μm in diameter an enamel rod, formally called an enamel prism, is a tightly packed mass of hydroxyapatite crystals in an organized pattern.[1] In cross section, it is best compared to a keyhole, with the top, or head, oriented toward the crown of the tooth, and the bottom, or tail, oriented toward the root of the tooth.

The arrangement of the crystals within each enamel rod is highly complex. Both ameloblasts (the cells which initiate enamel formation) and Tomes' processes affect the crystals' pattern. Enamel crystals in the head of the enamel rod are oriented parallel to the long axis of the rod.[1][3] When found in the tail of the enamel rod, the crystals' orientation diverges slightly(65 degrees) from the long axis.[1]

The arrangement of enamel rods is understood more clearly than their internal structure. Enamel rods are found in rows along the tooth, and within each row, the long axis of the enamel rod is generally perpendicular to the underlying dentin.[10] In permanent teeth, the enamel rods near the cementoenamel junction (CEJ) tilt slightly toward the root of the tooth. Understanding enamel orientation is very important in restorative dentistry, because enamel unsupported by underlying dentin is prone to fracture.[10]

Enamel and dentine - ground section.jpg

The area around the enamel rod is known as interrod enamel. Interrod enamel has the same composition as enamel rod, however a histologic distinction is made between the two because crystal orientation is different in each.[3] The border where the crystals of enamel rods and crystals of interrod enamel meet is called the rod sheath.[11]

Striae of Retzius are incremental lines that appear brown in a stained section of mature enamel. These lines are composed of bands or cross striations on the enamel rods that, when combined in longitudinal sections, seem to traverse the enamel rods.[10] Formed from changes in diameter of Tomes’ processes, these incremental lines demonstrate the growth of enamel, similar to the annual rings on a tree on transverse sections of enamel. The exact mechanism that produces these lines is still being debated. Some researchers hypothesize that the lines are a result of the diurnal, or 24 hour, metabolic rhythm of the ameloblasts producing the enamel matrix, which consists of an active secretory work period followed by an inactive rest period during tooth development. Thus, each band on the enamel rod demonstrates the work/rest pattern of the ameloblasts that generally occurs over a span of a week.[12] Perikymata which are associated with the Striae are shallow grooves noted clinically on the nonmasticatory surfaces of some teeth in the oral cavity.[13] Perikymata are usually lost through tooth wear, except on the protected cervical regions of some teeth, especially the permanent maxillary central incisors, canines, and first premolars, and may be confused as dental calculus.[12] Darker than the other incremental lines, the neonatal line is a incremental line that separates enamel formed before and after birth.[14] The neonatal line marks the stress or trauma experienced by the ameloblasts during birth, again illustrating the sensitivity of the ameloblasts as they form enamel matrix. As one would expect, the neonatal line is found in all primary teeth and in the larger cusps of the permanent first molars. They contain irregular structures of enamel prisms with disordered crystal arrangements basically formed by the abrupt bending of the prisms towards the root; usually, the prisms gradually bent back again to regain their previous orientation.[12]

Gnarled enamel is found at the cusps of teeth.[15] Its twisted appearance results from the orientation of enamel rods and the rows in which they lie.

Enamel is covered by various structures in relation to the development of tooth:

Nasmyth's membrane or enamel cuticle, structure of embryological origin is composed of keratin which gives rise to the enamel organ.[16][17]
Acquired pellicle, structure acquired after tooth eruption is composed of food debris, calculus, dental plaque (organic film).[18]

Development

Histologic slide showing a developing tooth. The mouth would be in the area of space at the top of the picture.

Enamel formation is part of the overall process of tooth development. When the tissues of the developing tooth are seen under a microscope, different cellular aggregations can be identified, including structures known as the enamel organ, dental lamina, and dental papilla.[19] The generally recognized stages of tooth development are the bud stage, cap stage, bell stage, and crown, or calcification, stage. Enamel formation is first seen in the crown stage.

Amelogenesis, or enamel formation, occurs after the first establishment of dentin, via cells known as ameloblasts. Human enamel forms at a rate of around 4 μm per day, beginning at the future location of cusps, around the third or fourth month of pregnancy.[10] As in all human processes, the creation of enamel is complex, but can generally be divided into two stages.[20] The first stage, called the secretory stage, involves proteins and an organic matrix forming a partially mineralized enamel. The second stage, called the maturation stage, completes enamel mineralization.

Histologic slide showing enamel formation

In the secretory stage, ameloblasts are polarized columnar cells. In the rough endoplasmic reticulum of these cells, enamel proteins are released into the surrounding area and contribute to what is known as the enamel matrix, which is then partially mineralized by the enzyme alkaline phosphatase.[21] When this first layer is formed, the ameloblasts move away from the dentin, allowing for the development of Tomes’ processes at the apical pole of the cell. Enamel formation continues around the adjoining ameloblasts, resulting in a walled area, or pit, that houses a Tomes’ process, and also around the end of each Tomes’ process, resulting in a deposition of enamel matrix inside of each pit.[22] The matrix within the pit will eventually become an enamel rod, and the walls will eventually become interrod enamel. The only distinguishing factor between the two is the orientation of the calcium phosphate crystals.

In the maturation stage, the ameloblasts transport substances used in the formation of enamel. Histologically, the most notable aspect of this phase is that these cells become striated, or have a ruffled border.[21] These signs demonstrate that the ameloblasts have changed their function from production, as in the secretory stage, to transportation. Proteins used for the final mineralization process compose most of the transported material. The noteworthy proteins involved are amelogenins, ameloblastins, enamelins, and tuftelins. During this process, amelogenins and ameloblastins are removed after use, leaving enamelins and tuftelin in the enamel.[23] By the end of this stage, the enamel has completed its mineralization.

At some point before the tooth erupts into the mouth, but after the maturation stage, the ameloblasts are broken down. Consequently, enamel, unlike many other tissues of the body, has no way to regenerate itself.[24] After destruction of enamel from decay or injury, neither the body nor a dentist can restore the enamel tissue. Enamel can be affected further by non-pathologic processes.

The discoloration of teeth over time can result from exposure to substances such as tobacco, coffee, and tea.[25] The staining occurs in the interprismatic region internally on the enamel, which causes the tooth to appear darker or more yellow overall. In a perfect state, enamel is colorless, but it does reflect underlying tooth structure with its stains since light reflection properties of the tooth are low.

Progress of enamel formation for primary teeth[26]
  Amount of enamel formed at birth  Enamel mineralization completed 
Primary
maxillary
tooth
Central incisor 5/6 1.5 months after birth
Lateral incisor 2/3 2.5 months after birth
Canine 1/3 9 months after birth
1st molar Cusps united; occlusal completely calcified
and 1/2 to 3/4 crown height
6 months after birth
2nd molar Cusps united; occlusal incompletely calcified;
calcified tissue covers 1/5 to 1⁄4 crown height
11 months after birth
Primary
mandibular
tooth
Central incisor 3/5 2.5 months after birth
Lateral incisor 3/5 3 months after birth
Canine 1/3 9 months after birth
1st molar Cusps united; occlusal
completely calcified
5.5 months after birth
2nd molar Cusps united; occlusal
incompletely calcified
10 months after birth

Destruction

Destruction of enamel by cervical decay from dental caries

The high mineral content of enamel, which makes this tissue the hardest in the human body, also makes it susceptible to a demineralization process which often occurs as dental caries, otherwise known as cavities.[19] Demineralization occurs for several reasons, but the most important cause of tooth decay is the ingestion of sugars. Tooth cavities are caused when acids dissolve tooth enamel:[27]

Ca10(PO4)6(OH)2(s) + 8H+(aq) → 10Ca2+(aq) + 6HPO42-(aq) + 2H2O(l)

Sugars from candies, soft drinks, and even fruit juices play a significant role in tooth decay, and consequently in enamel destruction. The mouth contains a great number and variety of bacteria, and when sucrose, the most common of sugars, coats the surface of the mouth, some intraoral bacteria interact with it and form lactic acid, which decreases the pH in the mouth.[28] Then, the hydroxylapatite crystals of enamel demineralize, allowing for greater bacterial invasion deeper into the tooth. The most important bacterium involved with tooth decay is Streptococcus mutans, but the number and type of bacteria varies with the progress of tooth destruction.[28]

Furthermore, tooth morphology dictates that the most common site for the initiation of dental caries is in the deep grooves, pits, and fissures of enamel. This is expected because these locations are impossible to reach with a toothbrush and allow for bacteria to reside there. When demineralization of enamel occurs, a dentist can use a sharp instrument, such as a dental explorer, and "feel a stick" at the location of the decay. As enamel continues to become less mineralized and is unable to prevent the encroachment of bacteria, the underlying dentin becomes affected as well. When dentin, which normally supports enamel, is destroyed by a physiologic condition or by decay, enamel is unable to compensate for its brittleness and breaks away from the tooth easily.

The effects of bruxism on an anterior tooth, revealing the dentin and pulp which are normally hidden by enamel

The extent to which tooth decay is likely, known as cariogenicity, depends on factors such as how long the sugar remains in the mouth. Contrary to common belief, it is not the amount of sugar ingested but the frequency of sugar ingestion that is the most important factor in the causation of tooth decay.[29] When the pH in the mouth initially decreases from the ingestion of sugars, the enamel is demineralized and left vulnerable for about 30 minutes. Eating a greater quantity of sugar in one sitting does not increase the time of demineralization. Similarly, eating a lesser quantity of sugar in one sitting does not decrease the time of demineralization. Thus, eating a great quantity of sugar at one time in the day is less detrimental than is a very small quantity ingested in many intervals throughout the day. For example, in terms of oral health, it is better to eat a single dessert at dinner time than to snack on a bag of candy throughout the day.

In addition to bacterial invasion, enamel is also susceptible to other destructive forces. Bruxism, also known as clenching of or grinding on teeth, destroys enamel very quickly. The wear rate of enamel, called attrition, is 8 micrometers a year from normal factors. A common misconception is that enamel wears away mostly from chewing, but actually teeth rarely touch during chewing. Furthermore, normal tooth contact is compensated physiologically by the periodontal ligaments (pdl) and the arrangement of dental occlusion. The truly destructive forces are the parafunctional movements, as found in bruxism, which can cause irreversible damage to the enamel.

Other nonbacterial processes of enamel destruction include abrasion (involving foreign elements, such as toothbrushes), erosion (involving chemical processes, such as lemon juice), and possibly abfraction (involving compressive and tensile forces).[30]

Though enamel is described as tough, it has a similar brittleness to glass making it, unlike other natural crack-resistant laminate structures such as shell and nacre, potentially vulnerable to fracture. In spite of this it can withstand the bite forces as high as 1,000 N many times a day during chewing.[31][32] This resistance is due in part to the microstructure of enamel which contains processes, enamel tufts, that stabilize the growth of such fractures at the dentinoenamel junction.[33] The configuration of the tooth also acts to reduce the tensile stresses that cause fractures during biting.[33]

Oral hygiene and fluoride

Considering the vulnerability of enamel to demineralization and the daily menace of sugar ingestion, prevention of tooth decay is the best way to maintain the health of teeth. Most countries have wide use of toothbrushes, which can reduce the number of bacteria and food particles on enamel. Some isolated societies do not have access to toothbrushes, but it is common for those people to use other objects, such as sticks, to clean their teeth. In between two adjacent teeth, floss is used to wipe the enamel surfaces free of plaque and food particles to discourage bacterial growth. Although neither floss nor toothbrushes can penetrate the deep grooves and pits of enamel, good general oral health habits can usually prevent enough bacterial growth to keep tooth decay from starting.

Common dentistry trays filled with fluoride foam

These methods of oral hygiene have been helped greatly by the use of fluoride. Fluoride can be found in many locations naturally, such as the ocean and other water sources. Naturally occurring calcium fluoride is not the same as sodium fluoride, a byproduct of the fertilizer industry and the fluoride that is added to drinking water. The recommended dosage of fluoride in drinking water depends on air temperature; in the U.S. it ranges from 0.7 to 1.2 mg/L.[34] Fluoride catalyzes the diffusion of calcium and phosphate into the tooth surface, which in turn remineralizes the crystalline structures in a dental cavity. The remineralized tooth surfaces contain fluoridated hydroxyapatite and fluorapatite, which resist acid attack much better than the original tooth did.[35] Fluoride therapy is used to help prevent dental decay.

Many groups of people have spoken out against fluoridated drinking water. One example used by these advocates is the damage fluoride can do as fluorosis. Fluorosis is a condition resulting from the overexposure to fluoride, especially between the ages of 6 months to 5 years, and appears as mottled enamel.[36] Consequently the teeth look unsightly, although the incidence of dental decay in those teeth is very small. It is important, however, to note that all substances, even beneficial ones, are detrimental when taken in extreme doses. Where fluoride is found naturally in high concentrations, filters are often used to decrease the amount of fluoride in water. For this reason, codes have been developed by dental professionals to limit the amount of fluoride a person should take.[37] These codes are supported by the American Dental Association and the American Academy of Pediatric Dentistry. The acute toxic dose of fluoride is ~5 mg/kg of body weight. Furthermore, whereas topical fluoride, found in toothpaste and mouthwashes, does not cause fluorosis, its effects are also less pervasive and not as long-lasting as those of systemic fluoride,[clarification needed] such as when drinking fluorinated water.[38] It is also claimed, all of a tooth's enamel gains the benefits of fluoride when it is ingested systemically, through fluoridated water or salt fluoridation (a common alternative in Europe) and that only some of the outer surfaces of enamel can be reached by topical fluoride. However, since there is no connection between the bloodstream and the enamel, ingested (systemic) fluoride works topical as well: With raised fluoride blood levels, fluoride levels in saliva increase also. Here fluoride mediates the remineralization with fluorapatite. The cavity-prevention mechanism of systemic fluoride is the same as that of fluoride from tooth paste, albeit the former usually results in prolonged fluoride presence in saliva which in turn may result in a deeper fluorapatite remineralisation. Despite fluoridation's detractors, most dental health care professionals and organizations agree that the inclusion of fluoride in public water has been one of the most effective methods of decreasing the prevalence of tooth decay.[39]

Effects of dental procedures

An X-ray showing enamel and dentin replaced by an amalgam restoration

Dental restorations

Most dental restorations involve the removal of enamel. Frequently, the purpose of removal is to gain access to the underlying decay in the dentin or inflammation in the pulp. This is typically the case in amalgam restorations and endodontic treatment.

Nonetheless, enamel can sometimes be removed before there is any decay present. The most popular example is the dental sealant. The process of placing dental sealants in the past involved removing enamel in the deep fissures and grooves of a tooth and replacing it with a restorative material.[40] Presently, it is more common to only remove decayed enamel if present. In spite of this, there are still cases where deep fissures and grooves in enamel are removed in order to prevent decay, and a sealant may or may not be placed depending on the situation. Sealants are unique in that they are preventative restorations for protection from future decay and have shown to reduce the risk of decay by 55% over 7 years.[41]

Aesthetics is another reason for the removal of enamel. Removing enamel is necessary when placing crowns and veneers to enhance the appearance of teeth. In both of these instances, it is important to keep in mind the orientation of enamel rods because it is possible to leave enamel unsupported by underlying dentin, leaving that portion of the prepared teeth more vulnerable to fracture.[42]

Acid-etching techniques

Invented in 1955, acid-etching employs dental etchants and is used frequently when bonding dental restoration to teeth.[43] This is important for long-term use of some materials, such as composites and sealants.[19] By dissolving minerals in enamel, etchants remove the outer 10 micrometers on the enamel surface and make a porous layer 5–50 micrometers deep.[44] This roughens the enamel microscopically and results in a greater surface area on which to bond.

The effects of acid-etching on enamel can vary. Important variables are the amount of time the etchant is applied, the type of etchant used, and the current condition of the enamel.[44]

There are three types of patterns formed by acid-etching.[44] Type 1 is a pattern where predominantly the enamel rods are dissolved; type 2 is a pattern where predominantly the area around the enamel rods are dissolved; and type 3 is a pattern where there is no evidence left of any enamel rods. Besides concluding that type 1 is the most favorable pattern and type 3 the least, the explanation for these different patterns is not known for certain but is most commonly attributed to different crystal orientation in the enamel.[45]

Tooth whitening

Tooth whitening or tooth bleaching procedures attempt to lighten a tooth's color in either of two ways: by chemical or mechanical action. Working chemically, a bleaching agent is used to carry out an oxidation reaction in the enamel and dentin.[46] The agents most commonly used to intrinsically change the color of teeth are hydrogen peroxide and carbamide peroxide. Oxygen radicals from the peroxide in the whitening agents contact the stains in the interprismatic spaces within the enamel layer. When this occurs, stains will be bleached and the teeth now appear lighter in color. Teeth not only appear whiter but also reflect light in increased amounts, which makes the teeth appear brighter as well. Studies show that whitening does not produce any ultrastructural or microhardness changes in the dental tissues. Studies show that patients who have whitened their teeth take better care of them.[47] However, a tooth whitening product with an overall low pH can put enamel at risk for decay or destruction by demineralization. Consequently, care should be taken and risk evaluated when choosing a product which is very acidic.[48] Tooth whiteners in toothpastes work through a mechanical action. They have mild abrasives which aid in the removal of stains on enamel. Although this can be an effective method, it does not alter the intrinsic color of teeth.

Microabrasion techniques employ both methods. An acid is used first to weaken the outer 22–27 micrometers of enamel in order to weaken it enough for the subsequent abrasive force.[49] This allows for removal of superficial stains in the enamel. If the discoloration is deeper or in the dentin, this method of tooth whitening will not be successful.

Systemic conditions affecting enamel

There are many different types of amelogenesis imperfecta. The hypocalcification type, which is the most common, is an autosomal dominant condition that results in enamel that is not completely mineralized.[50] Consequently, enamel easily flakes off the teeth, which appear yellow because of the revealed dentin. The hypoplastic type is X-linked and results in normal enamel that appears in too little quantity, having the same effect as the most common type.[50]

Gastroesophageal reflux disease can also lead to enamel loss, as acid refluxes up the esophagus and into the mouth, occurring most during overnight sleep.

Chronic bilirubin encephalopathy, which can result from erythroblastosis fetalis, is a disease which has numerous effects on an infant, but it can also cause enamel hypoplasia and green staining of enamel.[51]

Enamel hypoplasia is broadly defined to encompass all deviations from normal enamel in its various degrees of absence.[52] The missing enamel could be localized, forming a small pit, or it could be completely absent.

Erythropoietic porphyria is a genetic disease resulting in the deposition of porphyrins throughout the body. These deposits also occur in enamel and leave an appearance described as red in color and fluorescent.[53]

Fluorosis leads to mottled enamel and occurs from overexposure to fluoride.[28]

Tetracycline staining leads to brown bands on the areas of developing enamel. Children up to age 8 can develop mottled enamel from taking tetracycline. As a result, tetracycline is contraindicated in pregnant women.

Celiac disease, a disorder characterized by an auto-immune response to gluten, also commonly results in demineralization of the enamel.

In other mammals

For the most part, research has shown that formation in animals is almost identical to formation in humans. The enamel organ, including the dental papilla, and ameloblasts function similarly.[54] The variations of enamel that are present are infrequent but sometimes important. Differences exist, certainly, in the morphology, number, and types of teeth among animals.

Teeth of a rottweiler

Dogs are less likely than humans to have tooth decay due to the high pH of dog saliva, which prevents an acidic environment from forming and the subsequent demineralization of enamel which would occur.[55] In the event that tooth decay does occur (usually from trauma), dogs can receive dental fillings just as humans do. Similar to human teeth, the enamel of dogs is vulnerable to tetracycline staining. Consequently, this risk must be accounted for when tetracycline antibiotic therapy is administered to young dogs.[55] Enamel hypoplasia may also occur in dogs.[56]

The mineral distribution in rodent enamel is different from that of monkeys, dogs, pigs, and humans.[57] In horse teeth, the enamel and dentin layers are intertwined with each other, which increases the strength and decreases the wear rate of those teeth.[58]

See also

Notes

  1. ^ a b c d Ross et al., p. 485
  2. ^ Cate, p. 1
  3. ^ a b c Cate, p. 219
  4. ^ a b M. Staines, W. H. Robinson and J. A. A. Hood (1981). "Spherical indentation of tooth enamel". Journal of Materials Science. http://www.springerlink.com/content/w125706571032231/. 
  5. ^ Cate, p. 218
  6. ^ a b Johnson
  7. ^ Bath-Balogh, Fehrenbach, p. 180
  8. ^ Cate, p. 198
  9. ^ Bath-Balogh, Fehrenbach, p. 179
  10. ^ a b c d Cate, p. 224
  11. ^ Cate, p. 221
  12. ^ a b c Bath-Balogh, Fehrenbach, p. 186
  13. ^ Cate, p. 230
  14. ^ Cate, p. 76; Ross et al., p. 441
  15. ^ Cate, p. 229
  16. ^ Armstrong W.G.; Pääkkö, P; Kerttula, R; Taikina-Aho, O; Tuuponen, T; Hassi, J (1968). "Origin and nature of the acquired pellicle". Proc R Soc Med. 61 (9): 923–930. PMC 1902619. PMID 5679017. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=1902619. 
  17. ^ Darling A.I.; Pääkkö, P; Kerttula, R; Taikina-Aho, O; Tuuponen, T; Hassi, J (1943). "The Distribution of the Enamel Cuticle and Its Significance". Proc R Soc Med. 36 (9): 499–502. PMC 1998608. PMID 19992694. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=1998608. 
  18. ^ Bradway S.D., Bergey E.J., Scannapieco F.A., Ramasubbu N., Zawacki S., and Levine M.J. (1992). "Formation of salivary-mucosal pellicle: the role of transglutaminase". Biochem J. 284 (2): 557–564. PMC 1132674. PMID 1376115. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=1132674. 
  19. ^ a b c Ross et al., p. 443
  20. ^ Cate, p. 197
  21. ^ a b Ross et al., p. 445
  22. ^ Cate, p. 208
  23. ^ Ross et al., p. 491
  24. ^ Ross et al., p. 3
  25. ^ American Dental Hygienists' Association
  26. ^ Ash and Nelson, p. 54
  27. ^ Brown, p. 688
  28. ^ a b c Ross et al., p. 453
  29. ^ British Nutrition Foundation
  30. ^ Gandara and Truelove, chart titled: "Definitions of Tooth Surface Loss"
  31. ^ Braun S, Bantleon HP, Hnat WP, Freudenthaler JW, Marcotte MR, Johnson BE. (1995). A study of bite force, part 1: Relationship to various physical characteristics. Angle Orthod. 65(5):367-72.PubMed
  32. ^ Xu, H. H.; Smith, D. T.; Jahanmir, S.; Romberg, E; Kelly, J. R.; Thompson, V. P.; Rekow, E. D. (1998). "Indentation damage and mechanical properties of human enamel and dentin". Journal of Dental Research 77 (3): 472–480. doi:10.1177/00220345980770030601. PMID 9496920. 
  33. ^ a b Chai, H.; Lee, J. J.; Constantino, P. J.; Lucas, P. W.; Lawn, B. R. (2009). "Remarkable resilience of teeth". PNAS 106 (18): 7289–7293. doi:10.1073/pnas.0902466106. PMC 2678632. PMID 19365079. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=2678632. 
  34. ^ Bailey W, Barker L, Duchon K, Maas W (2008). "Populations receiving optimally fluoridated public drinking water—United States, 1992–2006". MMWR Morb Mortal Wkly Rep 57 (27): 737–41. PMID 18614991. http://cdc.gov/mmwr/preview/mmwrhtml/mm5727a1.htm. 
  35. ^ Selwitz RH, Ismail AI, Pitts NB (2007). "Dental caries". Lancet 369 (9555): 51–9. doi:10.1016/S0140-6736(07)60031-2. PMID 17208642. 
  36. ^ Cate, p. 216
  37. ^ "Caries diagnosis and risk assessment. A review of preventive strategies and management". J Am Dent Assoc 126 (Suppl): 1S–24S. 1995. PMID 7790681. 
  38. ^ Newbrun
  39. ^ "one of 10 great public health achievements of the 20th century": Community Water Fluoridation – Oral Health; Ten Great Public Health Achievements in the 20th Century – CDC
  40. ^ Summitt et al., p. 273
  41. ^ Summitt et al., p. 274
  42. ^ Summitt et al., p. 7
  43. ^ Summitt et al., p. 191.
  44. ^ a b c Summitt et al., p. 193
  45. ^ Cate, p. 235
  46. ^ Summitt et al., p. 402
  47. ^ Bath-Balogh, Fehrenbach, p. 189
  48. ^ Summitt et al., p. 404
  49. ^ Summitt et al., p. 420
  50. ^ a b Harris, p. 7: see section titled "X-Linked Inheritance"
  51. ^ eMedicine: Kernicterus
  52. ^ Ash and Nelson, p. 31
  53. ^ eMedicine: Erythropoietic Porphyria
  54. ^ Frandson and Spurgeon, p. 305
  55. ^ a b Pinney, p. 187
  56. ^ Pinney, p. 186
  57. ^ Fejerskov
  58. ^ Martin; Randall-Bowman

References

  • American Dental Association (2007) Oral Health Topics A-Z: Tooth whitening treatments, Online FAQ, accessed 7 October 2007
  • American Dental Hygienists' Association (2007) "Oral Health Information", webpage, accessed 7 October 2007
  • Ash, Major M., Jr. and Nelson, S.J. (2003) Dental anatomy, physiology, and occlusion, 8th ed., Philadelphia: W.B. Saunders, ISBN 0-7216-9382-2
  • Bath-Balogh, M. and Fehrenbach, M.J. (2006) "Illustrated Dental Embryology, Histology, Anatomy", 2nd ed., Philadelphia: W.B. Saunders, ISBN 978-4160-2499-6
  • Blackwell, Bonnie (1996) "Why Teeth Fossilize Better Than Bone", Dinosaur mailing list, accessed 7 October 2007
  • British Nutrition Foundation (2004) Dental Health, website, accessed 7 October 2007
  • Brown, Theodore L. (2003) Chemistry : the central science, 9th ed., Upper Saddle River, N.J. ; [Great Britain] : Prentice Hall, ISBN 0-13-049140-3 (pbk); ISBN 0-13-047038-4 (Access code card); ISBN 0-13-038165-9 (CD-ROM)
  • Cate, A.R. Ten (1998) Oral Histology: development, structure, and function, 5th ed., St. Louis, Mo. ; London: Mosby, ISBN 0-8151-2952-1
  • eMedicine (2007) Homepage, website, accessed 7 October 2007
  • Fejerskov, O. (1979) "Human dentition and experimental animals", Journal of Dental Research, 58 (special issue B: March), p. 725–734
  • Frandson, R.D. and Spurgeon, T.L. (1992) Anatomy and Physiology of Farm Animals, 5th ed. Philadelphia: Lea & Febiger, ISBN 0-8121-1435-3.
  • Gandara, B.K. and Truelove, E.L. (1999) "Diagnosis and Management of Dental Erosion", Journal of Contemporary Dental Practice, 1 (1: October), p. 016–023
  • Harris, Edward F. (2002) Craniofacial Growth and Development
  • Hebel, Jeanette L. and Poh-Fitxpatrick, M.B. (2006) Erythropoietic Porphyria, eMedicen online, accessed 7 October 2007
  • Johnson, Clarke (1999)Biology of the Human Dentition, Online course notes, Univ. Illinois at Chicago, accessed 7 October 2007 [The link produces "The page cannot be found", 29 July, 2011]
  • Martin, Chris (2007) Teeth, Encarta online encyclopedia, accessed 7 October 2007
  • Newbrun, E. (1986) Fluorides and dental caries: contemporary concepts for practitioners and students, 3rd ed., Springfield, Illinois: Thomas, ISBN 0-398-05196-8
  • Pinney, Chris C. (1992) The illustrated veterinary guide for dogs, cats, birds & exotic pets, 1st ed., Blue Ridge Summit, PA: Tab Books ISBN 0-8306-1986-0
  • Randall-Bowman, [n.i.] (2004) Gummed Out: Young Horses Lose Many Teeth, Vet Says, archived webpage, accessed 8 October 2007]
  • Ross, Michael H., Kaye, G.I. and Pawlina, W. (2006) Histology: a text and atlas, 5th ed., Philadelphia; London: Lippincott Williams & Wilkins, ISBN 0781772214
  • Springer, Shelley C. and Annibale, D.J. (2006) Kernicterus, eMedicen online, accessed 7 October 2007
  • Summitt, James B., William Robbins, J. and Schwartz, R.S. (2001) Fundamentals of Operative Dentistry: A Contemporary Approach, 2nd ed. Chicago, Ill. ; London: Quintessence Publishing, ISBN 0-86715-382-2

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • tooth enamel — noun hard white substance covering the crown of a tooth • Syn: ↑enamel • Derivationally related forms: ↑enamel (for: ↑enamel) • Hypernyms: ↑solid body substance …   Useful english dictionary

  • Tooth bleaching — Intervention Teeth Whitening Kits for Home Use MeSH …   Wikipedia

  • Enamel — may refer to * Tooth enamel, the hard mineralized surface of teeth; * Vitreous enamel, a smooth, durable coating made of melted and fused glass powder; * Enamel paint, a paint that dries to an especially hard glossy finish, resembling vitreous… …   Wikipedia

  • Tooth brushing — is the act of cleaning teeth with a toothbrush.Modern medical research has shown that brushing teeth properly can prevent cavities, gingivitis, and periodontal, or gum disease, which causes at least one third of adult tooth loss. If teeth are not …   Wikipedia

  • Tooth — Infobox Anatomy Name = Teeth Caption = An adult human s teeth. Caption2 = CGI posterior view of teeth taken from inside of mouthTeeth (singular, Tooth) are small whitish structures found in the jaws (or mouths) of many vertebrates that are used… …   Wikipedia

  • Tooth (human) — For other uses of tooth or teeth , see Tooth (disambiguation). Teeth An adult human s teeth …   Wikipedia

  • Enamel rod — An Enamel rod is the basic unit of tooth enamel. The antiquated term is enamel prism. Measuring 4 μm wide to 8 μm high, an enamel rod is a tightly packed, highly organized mass of hydroxyapatite crystals. In cross section, it is best compared to… …   Wikipedia

  • Enamel organ — The enamel organ, also known as dental organ, is a cellular aggregation seen in histologic sections of a developing tooth. It lies above a condensation of ectomesenchymal cells called the dental papilla. Historically, enamel organ has been the… …   Wikipedia

  • enamel organ — noun : an ectodermal ingrowth from the dental ridge that forms a cap with two walls separated by a reticulum of stellate cells, encloses the anterior part of the developing dental papilla and the cells of the inner enamel layer adjacent to the… …   Useful english dictionary

  • Tooth — (t[=oo]th), n.; pl. {Teeth} (t[=e]th). [OE. toth,tooth, AS. t[=o][eth]; akin to OFries. t[=o]th, OS. & D. tand, OHG. zang, zan, G. zahn, Icel. t[ o]nn, Sw. & Dan. tand, Goth. tumpus, Lith. dantis, W. dant, L. dens, dentis, Gr. odoy s, odo ntos,… …   The Collaborative International Dictionary of English

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”