Lumped element model

Lumped element model

In general, the lumped component model is a way of simplifying the behaviour of spatially distributed systems into a topology consisting of discrete entities that approximate the behaviour of the distributed system under certain assumptions. It is useful in electronics, heat transfer, mechanics and acoustics

Lumped component model in electronics

The lumped element model of electronic circuits makes the simplifying assumption that each element is finite point in space, and that the wires connecting elements are perfect conductors.

The lumped element model is valid whenever L_c<, where L_c denotes the circuit's characteristic length, and lambda denotes the circuit's operating wavelength.Otherwise, we must consider more general models, such as the Distributed element model.

Real-world components exhibit non-ideal characteristics. To account for leakage in capacitors for example, we can visualize the capacitor as having a large resistor connected in-parallel. Similarly to account for inductive reactance, we can visualize component leads as small inductors.

Lumped component model in acoustics

In this context, the lumped component model extends the distributed concepts of Acoustic theory subject to approximation. In the acoustical lumped component model, certain physical components with acoustical properties may be approximated as behaving similarly to standard electronic components or simple combinations of components.

*A rigid-walled cavity containing air (or similar compressible fluid) may be approximated as a capacitor whose value is proportional to the volume of the cavity. The validity of this approximation relies on the shortest wavelength of interest being significantly (much) larger than the longest dimension of the cavity.

*A reflex port may be approximated as an inductor whose value is proportional to the effective length of the port divided by its cross-sectional area. The effective length is the actual length plus an end correction. This approximation relies on the shortest wavelength of interest being significantly larger than the longest dimension of the port.

*Certain types of damping material can be approximated as a resistor. The value depends on the properties and dimensions of the material. The approximation relies in the wavelengths being long enough and on the properties of the material itself.

*A loudspeaker drive unit (typically a woofer or subwoofer drive unit may be approximated as a series connection of a zero-impedance voltage source, a resistor, a capacitor and an inductor. The values depend on the specifications of the unit. The approximation depends on the specifications of the unit and the wavelength of interest.

ee also

*Distributed element model

External links

* [http://www.jat.co.kr/eda/saber/mpp.pdf Advanced modelling and simulation techniques for magnetic components]
* [http://www.imtek.uni-freiburg.de/simulation/mathematica/IMSweb/ IMTEK Mathematica Supplement (IMS)] , the Open Source IMTEK Mathematica Supplement (IMS) for lumped modelling


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Lumped capacitance model — A lumped capacitance model, also called lumped system analysis,[1] reduces a thermal system to a number of discrete “lumps” and assumes that the temperature difference inside each lump is negligible. This approximation is useful to simplify… …   Wikipedia

  • Distributed element model — Fig.1 Transmission line. The distributed element model applied to a transmission line. This article is an example from the domain of electrical systems, which is a special case of the more general distributed parameter systems. In electrical… …   Wikipedia

  • Distributed element filter — Figure 1. A circuit featuring many of the f …   Wikipedia

  • Electrical element — Electrical elements are conceptual abstractions representing idealized electrical components, such as resistors, capacitors, and inductors, used in the analysis of electrical networks. Any electrical network can be analysed as multiple,… …   Wikipedia

  • Hydrological transport model — An hydrological transport model is a mathematical model used to simulate river or stream flow and calculate water quality parameters. These models generally came into use in the 1960s and 1970s when demand for numerical forecasting of water… …   Wikipedia

  • Metamaterial antenna — This Z antenna tested at the National Institute of Standards and Technology is smaller than a standard antenna with comparable properties. Its high efficiency is derived from the Z element inside the square that acts as a metamaterial, greatly… …   Wikipedia

  • Mechanical filter — Figure 1. A mechanical filter made by the Kokusai Electric Company intended for selecting the narrow 2 kHz bandwidth signals in SSB radio receivers. It operates at 455 kHz, a common IF for these receivers, and is dimensioned 45×15×15 mm ( …   Wikipedia

  • Электромеханический фильтр — ЭМФ советского производства, предназначенный для выделения нижней боковой полосы в аппаратуре радиосвязи с промежуточной частотой 500 кГц. Ширина полосы пропускания  3,1 кГц. Механическ …   Википедия

  • Dissipation factor — In physics, the dissipation factor (DF) is a measure of loss rate of energy of a mode of oscillation (mechanical, electrical, or electromechanical) in a dissipative system. It is the reciprocal of Quality factor, which represents the quality of… …   Wikipedia

  • Loss tangent — The loss tangent is a parameter of a dielectric material that quantifies its inherent dissipation of electromagnetic energy. The term refers to the tangent of the angle in a complex plane between the resistive (lossy) component of an… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”