Vinyl chloride

Vinyl chloride
Vinyl chloride
Identifiers
CAS number 75-01-4 YesY
PubChem 6338
ChemSpider 6098 YesY
KEGG C06793 YesY
ChEBI CHEBI:28509 YesY
Jmol-3D images Image 1
Properties
Molecular formula C2H3Cl
Molar mass 62.498 g/mol
Appearance Colorless gas
Density 0.911 g/ml
Melting point

-153.8 °C (119.4 K)

Boiling point

-13.4 °C (259.8 K)

Solubility in water 2.7 g/L (0.0432 mol/L)
Thermochemistry
Std enthalpy of
formation
ΔfHo298
-94.12 kJ/mol (solid)
Specific heat capacity, C 0.8592 J/K/g (gas)
0.9504 J/K/g (solid)
Hazards
MSDS External MSDS
Flash point -61.11°C
 YesY chloride (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Vinyl chloride is the organochloride with the formula H2C:CHCl. It is also called vinyl chloride monomer, VCM or chloroethene. This colorless compound is an important industrial chemical chiefly used to produce the polymer polyvinyl chloride (PVC). At ambient pressure and temperature, vinyl chloride is a gas with a sickly sweet odor. It is highly toxic, flammable and carcinogenic.

Contents

History

Vinyl chloride was first produced in 1835 by Justus von Liebig and his student Henri Victor Regnault. They obtained it by treating ethylene dichloride with a solution of potassium hydroxide in ethanol.

In 1912, Frans, a German chemist working for Griesheim-Elektron, patented a means to produce vinyl chloride from acetylene and hydrogen chloride using mercuric chloride as a catalyst. Whereas this method was widely used during the 1930s and 1940s, it has since been superseded by more economical processes based on ethylene, at least in the West. It remains the main production in China.

Production

Vinyl chloride is produced on a substantial scale - approximately 31.1 million tons (7.5 Bel tons) were produced in 2000.[1] Two methods are employed, the hydrochlorination of acetylene and the dehydrochlorination of ethylene dichloride (1,2-dichloroethane).[2]

Manufacturing details from ethylene dichloride

Direct chlorination

The production of vinyl chloride from 1,2-dichloroethane (EDC) consists of a series of well-defined steps. EDC is prepared by reacting ethylene and chlorine.[3] In the presence of iron(III) chloride as a catalyst, these compounds react exothermically:

CH2=CH2 + Cl2 → ClCH2CH2Cl

This process is very selective, resulting in high purity EDC and high yields. However any dissolved catalyst and moisture must be removed before EDC enters the VCM production process.

Thermal cracking

When heated to 500 °C at 15–30 atm (1.5 to 3 MPa) pressure, EDC vapor decomposes to produce vinyl chloride and anhydrous HCl.

ClCH2CH2Cl → CH2=CHCl + HCl

The thermal cracking reaction is highly endothermic, and is generally carried out in a fired heater. Even though residence time and temperature are carefully controlled, it produces significant quantities of chlorinated hydrocarbon side products. In practice, EDC conversion is relatively low (50 to 60 percent). The furnace effluent is immediately quenched with cold EDC to stop undesirable side reactions. The resulting vapor-liquid mixture then goes to a purification system. Some processes use an absorber-stripper system to separate HCl from the chlorinated hydrocarbons, while other processes use a refrigerated continuous distillation system.

Oxychlorination

Modern VCM plants use recycled HCl to produce more EDC via oxychlorination, which entails the reaction of ethylene, oxygen and hydrogen chloride over a copper(II) chloride catalyst to produce EDC:

CH2=CH2 + 2 HCl + ½ O2 → ClCH2CH2Cl + H2O.

The reaction is highly exothermic.

Due to the relatively low cost of ethylene, compared to acetylene, most vinyl chloride has been produced via this technique since the late 1950s. This is despite the lower yields, lower product purity and higher costs for waste treatment. By-products of the oxychlorination reaction, may be recovered, as feedstocks for chlorinated solvents production. One useful byproduct of the oxychlorination is ethyl chloride, a topical anesthetic.

Waste treatment

For environmental reasons, the acidic aqueous wastestream is treated to remove organic compounds and neutralized before it can be sent to the plant's "outfall". An outfall is a monitored wastewater stream that must conform to the plant's standards. Some very hazardous wastes are generated in the recovery of the product vinyl chloride. These wastes require specialized procedures. These wastes are burned onsite in hazardous waste burners that again are subject to strict standards.

Production from acetylene

Acetylene reacts with anhydrous hydrogen chloride gas over a mercuric chloride catalyst to give vinyl chloride:

C2H2 + HCl → CH2=CHCl

The reaction is exothermic and highly selective. Product purity and yields are generally very high.

This was the most common industrial route to VCM, before ethylene became widely distributed. When VCM producers shifted to using the thermal cracking of EDC described above, some used byproduct HCl in conjunction with a colocated acetylene-based unit. The hazards of storing and shipping acetylene meant that the VCM facility needed to be located very close to the acetylene generating facility.

Storage

Vinyl chloride is stored as a liquid. Often, the storage containers for the product VCM are high capacity spheres. The spheres have an inside sphere and an outside sphere. Several inches of empty space separate the inside sphere from the outside sphere. This void area between the spheres is purged with an inert gas such as nitrogen. As the nitrogen purge gas exits the void space it passes through an analyzer that is designed to detect if any vinyl chloride is leaking from the internal sphere. If vinyl chloride starts to leak from the internal sphere or if a fire is detected on the outside of the sphere then the contents of the sphere are automatically dumped into an emergency underground storage container.

Uses

Vinyl chloride is a chemical intermediate, not a final product. Due to the hazardous nature of vinyl chloride to human health there are no end products that use vinyl chloride in its monomer form. Polyvinyl chloride is very stable, storable, and nowhere near as acutely hazardous as the monomer.

Vinyl chloride liquid is fed to polymerization reactors where it is converted from a monomer to a polymer PVC. The final product of the polymerization process is PVC in either a flake or pellet form. From its flake or pellet form PVC is sold to companies that heat and mold the PVC into end products such as PVC pipe and bottles. Tens of billions of pounds of PVC are sold on the global market each year.

Until 1974, vinyl chloride was used in aerosol spray propellant. Prior to the removal of vinyl chloride from hair spray the accumulation of vinyl chloride vapor in hair salons may have exceeded the NOAEL (No Observable Adverse Effect Level) exposure guidelines.

Vinyl chloride was briefly used as an inhalational anaesthetic, in a similar vein to ethyl chloride, though its toxicity forced this practice to be abandoned.

Fire and explosion hazard

OSHA lists VCM as a Class IA Flammable Liquid, with an National Fire Protection Association Flammability Rating of 4. Because of its low boiling point, liquid VCM will undergo flash evaporation (i. e., autorefrigerate) upon its release to atmospheric pressure. The portion vaporized will form a dense cloud (more than twice as heavy as the surrounding air). The risk of subsequent explosion or fire is significant. According to OSHA, the flash point of VCM is -78 C (-108 F). Its flammable limits in air are: lower 3.6 volume % and upper 33.0 volume %. Fire may release toxic hydrogen chloride (HCl) and carbon monoxide (CO).[4]

Health effects

Vinyl chloride monomer

Almost all vinyl chloride monomer (VCM) is used to create polymers, primarily PVC (polyvinyl chloride).[5]

Historically, workers in PVC plants were often exposed to high levels of VCM. Due to the carcinogenicity of VCM; many of those workers have contracted and died from cancer. The hepatotoxicity of VCM has long been established since the 1930s when the PVC industry was just in its infant stages. In the very first study about the dangers of Vinyl Chloride (VC), published by Patty in 1930, it was disclosed that exposure of test animals to just a single short-term high dose of VC caused liver damage.[6] In 1949, a Russian publication by Tribukh discussed the finding that VC caused liver injury among workers.[7] In 1954, Dr. Rex Wilson, Medical Director, and William McCormick, Industrial Hygienist and Toxicologist, both of B.F. Goodrich Chemical, published an article that stated that it was known VC caused liver injury for short-term exposures; but almost nothing was known about its long-term effects. They also stated that long-term animal toxicology studies should be performed to fill this void of information. The study noted that if a chemical did not justify the cost of testing, and its ill-effects on workers and the public were known, the chemical should not be made.[8] Thereafter, in 1963, Lester and Greenberg published an article reporting their findings from research paid for in part by Allied Chemical. They too found liver damage in test animals from exposures below 500 parts per million (ppm).[9] Then, in 1963, a Romanian researcher, Suciu, published his findings of liver disease in VC workers.[10] In 1968, Mutchler and Kramer, two Dow researchers, reported their finding that exposures as low as 300 ppm caused liver damage in VC workers thus confirming earlier animal data in humans.[11] In a 1969 presentation given in Japan, Dr. P. L. Viola, a European researcher working for the European VC industry, indicated, “every monomer used in V.C. manufacture is hazardous....various changes were found in bone and liver. Particularly, much more attention should be drawn to liver changes. The findings in rats at the concentration of 4 to 10 ppm are shown in pictures.” In light of the finding of liver damage in rats from just 4-10 ppm of VC exposure, Dr. Viola added that he “should like some precautions to be taken in the manufacturing plants polymerizing vinyl chloride, such as a reduction of the threshold limit value of monomer …” [12] In 1970, Dr. Viola, reported that test animals exposed to 30,000 ppm of VC developed cancerous tumors. Viola began his research looking for the cause of liver and bone injuries found in VC workers. Dr. Viola’s findings in 1970 were a “red flag” to B.F. Goodrich and the industry.[13] In 1972, Dr. Maltoni, another Italian researcher for the European VC industry, found liver tumors (including angiosarcoma) from VC exposures as low as 250 ppm for four hours a day.[14]

In the late 1960s the cancers that all of theses studies warned of finally manifested itself in workers. Dr. John Creech from B.F. Goodrich discovered angiosarcoma (a very rare cancer) in the liver of a worker at the B.F. Goodrich plant in Louisville, Kentucky. Then, finally, on January 23, 1974, B.F. Goodrich informed the government and issued a press release stating that it was “investigating whether the cancer deaths of three employees in the polyvinyl chloride operations at its Louisville, Ky. plant were related to occupational causes.” By then there really was no doubt that vinyl chloride caused angiosarcoma of the liver; it had been shown in both animal studies and worker experience.

A 1997 U.S. Centers for Disease Control and Prevention (CDC) report concluded that the development and acceptance by the PVC industry of a closed loop polymerization process in the late 1970s "almost completely eliminated worker exposures" and that "new cases of hepatic angiosarcoma in vinyl chloride polymerization workers have been virtually eliminated."[15]

According to the United States Environmental Protection Agency (EPA), "vinyl chloride emissions from polyvinyl chloride (PVC), ethylene dichloride (EDC), and vinyl chloride monomer (VCM) plants cause or contribute to air pollution that may reasonably be anticipated to result in an increase in mortality or an increase in serious irreversible, or incapacitating reversible illness. Vinyl chloride is a known human carcinogen that causes a rare cancer of the liver."[16] EPA's 2001 updated Toxicological Profile and Summary Health Assessment for VCM in its Integrated Risk Information System (IRIS) database lowers EPA's previous risk factor estimate by a factor of 20 and concludes that "because of the consistent evidence for liver cancer in all the studies...and the weaker association for other sites, it is concluded that the liver is the most sensitive site, and protection against liver cancer will protect against possible cancer induction in other tissues."[17]

A 1998 front-page series in the Houston Chronicle claimed the vinyl industry has manipulated vinyl chloride studies to avoid liability for worker exposure and to hide extensive and severe chemical spills into local communities.[18] Retesting of community residents in 2001 by the U.S. Agency for Toxic Substances and Disease Registry (ATSDR) found dioxin levels similar to those in a comparison community in Louisiana and to the U.S. population.[19] Cancer rates in the community were similar to Louisiana and US averages.[20]

Dioxins

The environmentalist group Greenpeace has advocated the global phase-out of PVC because they claim dioxin is produced as a byproduct of vinyl chloride manufacture and from incineration of waste PVC in domestic garbage. The European Industry, however, asserts[citation needed] that it has improved production processes to minimize dioxin emissions. Dioxins are a global health threat because they persist in the environment and can travel long distances. At very low levels, near those to which the general population is exposed, dioxins have been linked to immune system suppression, reproductive disorders, a variety of cancers, and endometriosis.[21] According to a 1994 report by the British firm, ICI Chemicals & Polymers Ltd., "It has been known since the publication of a paper in 1989 that these oxychlorination reactions [used to make vinyl chloride and some chlorinated solvents] generate polychlorinated dibenzodioxins (PCDDs) and dibenzofurans (PCDFs). The reactions include all of the ingredients and conditions necessary to form PCDD/PCDFs.... It is difficult to see how any of these conditions could be modified so as to prevent PCDD/PCDF formation without seriously impairing the reaction for which the process is designed." In other words, dioxins are an undesirable byproduct of polymerizing PVC and eliminating the production of dioxins while maintaining the polymerization reaction may be difficult. Dioxins created by vinyl chloride production are released by on-site incinerators, flares, boilers, wastewater treatment systems and even in trace quantities in vinyl resins.[22] The US EPA estimate of dioxin releases from the PVC industry was 13 grams TEQ in 1995, or less than 0.5% of the total dioxin emissions in the US; by 2002, PVC industry dioxin emissions had been further reduced by 23%.[23]

The largest well-quantified source of dioxin in the US EPA inventory of dioxin sources is barrel burning of household waste.[24] Studies of household waste burning indicate consistent increases in dioxin generation with increasing PVC concentrations.[25] According to the EPA dioxin inventory, landfill fires are likely to represent an even larger source of dioxin to the environment. A survey of international studies consistently identifies high dioxin concentrations in areas affected by open waste burning and a study that looked at the homologue pattern found the sample with the highest dioxin concentration was "typical for the pyrolysis of PVC". Other EU studies indicate that PVC likely "accounts for the overwhelming majority of chlorine that is available for dioxin formation during landfill fires."[26]

The next largest sources of dioxin in the EPA inventory are medical and municipal waste incinerators.[27] Studies have shown a clear correlation between dioxin formation and chloride content and indicate that PVC is a significant contributor to the formation of both dioxin and PCB in incinerators.[28]

In February 2007, the Technical and Scientific Advisory Committee of the US Green Building Council (USGBC) released its report on a PVC avoidance related materials credit for the LEED Green Building Rating system. The report concludes that "no single material shows up as the best across all the human health and environmental impact categories, nor as the worst" but that the "risk of dioxin emissions puts PVC consistently among the worst materials for human health impacts." [29]

See also

References

  1. ^ Klaus Weissermel, Hans-Jürgen Arpe in "Industrial organic chemistry"
  2. ^ M. Rossberg et al. “Chlorinated Hydrocarbons” in Ullmann’s Encyclopedia of Industrial Chemistry 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06 233.pub2
  3. ^ Allen, D. T.. "Chapter 4 - Industrial Ecology". Green Engineering. United States Environmental Protection Agency. http://www.epa.gov/opptintr/greenengineering/pubs/ch14_summary.html. 
  4. ^ "Occupational Safety and Health Guideline for Vinyl Chloride"1988.
  5. ^ The Vinyl Institute; www.vinylinfo.org/aboutvi/vi_commitment2.html
  6. ^ Patty, F.A. et al. “Acute Response of Guinea Pigs to Vapors of Some Commercial Organic Compounds.” Public Health Reports. Volume 45, Number 24. August 22, 1930
  7. ^ Tribukh, S L et al. “Working Conditions and Measures for Their Improvement in Production and Use of Vinylchloride Plastics” (1949)
  8. ^ Wilson, Rex H et al. “Toxicology of Plastics and Rubber- Plastomers and Monomers.” Reprinted from Industrial Medicine and Surgery. 23:11, 479-786. November 1954.
  9. ^ Lester, D. et al. “Effects of Single and Repeated Exposures of Humans and Rats to Vinyl Chloride” Laboratory of applied biodynamics, Yale University and Department of Pathology. School of Medicine, Yale University, New Haven, Connecticut.
  10. ^ Suciu, I et al. “Clinical Manifestations in Vinyl Chloride Poisoning” Clinic of Professional Diseases. Cluj, Romania.
  11. ^ Kramer, G.C., M.D. “The Correlation of Clinical and Environmental Measurements for Workers Exposed to Vinyl Chloride.” The Dow Chemical Company. Midland Michigan.
  12. ^ Viola, P.L. “Pathology of Vinyl Chloride” International Congress on Occupational Health. Japan. 1969.
  13. ^ Viola, P L. “Carcinogenic Effect of Vinyl Chloride” Presented at the Tenth International Cancer Congress. Huston, Texas. May 22–29, 1970.
  14. ^ Maltoni, C. “Cancer Detection and Prevention” (1972) Presented at the Second International Symposium on Cancer Detection and Prevention. Bologna, April 9–12, 1973.
  15. ^ Epidemiologic Notes and Reports Angiosarcoma of the Liver Among Polyvinyl Chloride Workers – Kentucky, Centers for Disease Control and Prevention Web site. 1997. Available at: http://www.cdc.gov/mmwr/preview/mmwrhtml/00046136.htm
  16. ^ National Emission Standards for Hazardous Air Pollutants (NESHAP) for Vinyl Chloride Subpart F, OMB Control Number 2060-0071, EPA ICR Number 0186.09 (Federal Register: September 25, 2001 (Volume 66, Number 186))
  17. ^ EPA Toxicologica Review of Vinyl Chloride i Support of Informaiton on the IRIS. May 2000
  18. ^ Jim Morris, "In Strictest Confidence . The chemical industry's secrets," Houston Chronicle. Part One: "Toxic Secrecy," June 28, 1998, pgs. 1A, 24A-27A; Part Two: "High-Level Crime," June 29, 1998, pgs. 1,A, 8A, 9A; and Part Three: "Bane on the Bayou," July 26, 1998, pgs. 1A, 16A.]
  19. ^ “ATSDR Study Finds Dioxin Levels in Calcasieu Parish Residents Similar to National Levels,” available at: http://www.atsdr.cdc.gov/NEWS/calcasieula031506.html; “ATSDR Study Finds Dioxin Levels Among Lafayette Parish Residents Similar to National Levels,” available at: http://www.atsdr.cdc.gov/NEWS/lafayettela031606.html; ATSDR Report: Serum Dioxin Levels In Residents Of Calcasieu Parish, Louisiana, October 2005, Publication Number PB2006-100561, available from the National Technical Information Services, Springfield, Virginia, phone: 1-800-553-6847/1-703-605-6244
  20. ^ "Calcasieu Cancer Rates Similar to State/National Averages." News Release, State of Louisiana Dept. of Health and Hospitals. January 17, 2002
  21. ^ "Evidence Indicates Endometriosis Could be Linked to Environment". ksl.com. 2007-11-26. http://www.ksl.com/?nid=148&sid=2223164. Retrieved 2009-08-19. 
  22. ^ Pat Costner etal, "PVC: A Primary Contributor to the U.S. Dioxin Burden; Comments submitted to the U.S. EPA Dioxin Reassessment," (Washington, D.C. Greenpeace U.S.A., February 1995
  23. ^ US EPA, The Inventory of Sources and Environmental Releases of Dioxin-Like Compounds in the United States: The Year 2002 Update, May 2007
  24. ^ US EPA2005
  25. ^ Costner, Pat, (2005), "Estimating Releases and Prioritizing Sources in the Context of the Stockholm Convention", International POPs Elimination Network, Mexico.
  26. ^ Costner 2005
  27. ^ Beychok, M.R., A data base of dioxin and furan emissions from municipal refuse incinerators, Atmospheric Environment, Elsevier B.V., January 1987
  28. ^ Katami, Takeo, et al. (2002) "Formation of PCDDs, PCDFs, and Coplanar PCBs from Polyvinyl Chloride during Combustion in an Incinerator" Environ. Sci. Technol., 36, 1320-1324. and Wagner, J., Green, A. 1993. Correlation of chlorinated organic compound emissions from incineration with chlorinated organic input. Chemosphere 26 (11): 2039-2054. and Thornton, Joe (2002) "Environmental Impacts of polyvinyl Chloride Building Materials", Healthy Building Network, Washington, DC.
  29. ^ The USGBC document can be found on line at https://www.usgbc.org/ShowFile.aspx?DocumentID=2372 An analysis by the Healthy Building NEtwork is at http://www.pharosproject.net/wiki/index.php?title=USGBC_TSAC_PVC ]]

Further reading

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • vinyl chloride — n. a colorless gas, CH2:CHCl, made by reacting acetylene with hydrogen chloride or by cracking ethylene dichloride: it is used to make polyvinyl chloride, etc …   English World dictionary

  • vinyl chloride — Chem. a colorless, easily liquefied, flammable, slightly water soluble gas, C2H3Cl, having a pleasant, etherlike odor: used in the manufacture of plastics, as a refrigerant, and in the synthesis of polyvinyl chloride and other organic compounds.… …   Universalium

  • Vinyl chloride — A substance used in manufacturing plastics that is known to be toxic and carcinogenic (cancer causing). Dangerous exposure to vinyl chloride occurs mainly in the workplace. Breathing high levels of vinyl chloride for short periods of time can… …   Medical dictionary

  • vinyl chloride — vinilchloridas statusas T sritis chemija formulė CH₂=CHCl atitikmenys: angl. vinyl chloride rus. винилхлорид ryšiai: sinonimas – chloretenas …   Chemijos terminų aiškinamasis žodynas

  • vinyl chloride — A substance used to make plastics. Exposure to vinyl chloride may increase the risk of developing liver, brain, and lung cancers; lymphoma; and leukemia …   English dictionary of cancer terms

  • vinyl chloride disease — acro osteolysis resulting from exposure to vinyl chloride, characterized by Raynaud phenomenon, skin changes resembling scleroderma on the backs of the hands and on the forearms, and bony changes affecting the terminal phalanges of the fingers… …   Medical dictionary

  • vinyl chloride — noun : a flammable gaseous compound CH2 . CHCl with an ethereal odor prepared by catalytic addition of hydrogen chloride to acetylene or by pyrolysis of ethylene dichloride and used chiefly for making vinyl resins : chloro ethylene see polyvinyl… …   Useful english dictionary

  • vinyl chloride — noun A colourless gas, CH=CHCl, used in the manufacture of the plastic polyvinyl chloride …   Wiktionary

  • vinyl chloride — vi′nyl chlo′ride n. chem. a colorless gas, C2H3Cl, used in making plastics and polyvinyl chloride and as a refrigerant • Etymology: 1935–40 …   From formal English to slang

  • vinyl chloride — noun Date: 1872 a flammable gaseous carcinogenic compound C2H3Cl that is used especially to make vinyl resins …   New Collegiate Dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”