- Uranium trioxide
Uranium trioxide Identifiers CAS number Properties Molecular formula UO3 Molar mass 286.29 g/mol Appearance yellow-orange powder Density 5.5–8.7 g/cm3 Melting point
~200–650 °C (decomposes)
Solubility in water Partially soluble Structure Crystal structure see text Space group I41/amd (γ-UO3) Hazards MSDS External MSDS EU Index 092-002-00-3 EU classification Very toxic (T+)
Dangerous for the environment (N)
R-phrases , , S-phrases , , , Flash point Non-flammable Related compounds Related uranium oxides Uranium dioxide
(what is: /?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Uranium trioxide (UO3), also called uranyl oxide, uranium(VI) oxide, and uranic oxide, is the hexavalent oxide of uranium. The solid may be obtained by heating uranyl nitrate to 400 °C. Its most commonly encountered polymorph, γ-UO3, is a yellow-orange powder.
- 1 Production and use
- 2 Health and safety hazards
- 3 Structure
- 4 Reactivity
- 5 Uranium oxides in ceramics
- 6 References
Production and use
There are three methods to generate uranium trioxide. As noted below, two are used industrially in the reprocessing of nuclear fuel and uranium enrichment.
- U3O8 can be oxidized at 500°C with oxygen. Note that above 750 °C even in 5 atm O2 UO3 decomposes into U3O8.
- Uranyl nitrate, UO2(NO3)2·6H2O can be heated to yield UO3. This occurs during the reprocessing of nuclear fuel. Fuel rods are dissolved in HNO3 to separate uranyl nitrate from plutonium and the fission products (the PUREX method). The pure uranyl nitrate is converted to solid UO3 by heating at 400 °C. After reduction with hydrogen (with other inert gas present) to uranium dioxide, the uranium can be used in new MOX fuel rods.
- Ammonium diuranate or sodium diuranate (Na2U2O7·6H2O) may be decomposed. Sodium diuranate, also known as yellowcake, is converted to uranium trioxide in the enrichment of uranium. Uranium dioxide and uranium tetrafluoride are intermediates in the process which ends in uranium hexafluoride.
Uranium trioxide is shipped between processing facilities in the form of a gel.
Cameco Corporation, which operates at the world's largest uranium refinery at Blind River, Ontario, produces high-purity uranium trioxide.
It has been reported that the corrosion of uranium in a silica rich aqueous solution forms both uranium dioxide and uranium trioxide. In pure water, schoepite (UO2)8O2(OH)12·12(H2O) is formed in the first week and then after four months studtite (UO2)O2·4(H2O) was produced. Reports on the corrosion of uranium metal have been published by the Royal Society.
Health and safety hazards
Like all hexavalent uranium compounds, UO3 is hazardous by inhalation, ingestion, and through skin contact. It is a poisonous, slightly radioactive substance, which may cause shortness of breath, coughing, acute arterial lesions, and changes in the chromosomes of white blood cells and gonads leading to congenital malformations if inhaled. However, once ingested, uranium is mainly toxic for the kidneys and may severely affect their function.
Solid state structure
The only well characterized binary trioxide of any actinide is UO3, of which several polymorphs are known. Solid UO3 loses O2 on heating to give green-colored U3O8: reports of the decomposition temperature in air vary from 200–650 °C. Heating at 700 °C under H2 gives dark brown uranium dioxide (UO2), which is used in MOX nuclear fuel rods.
The α (alpha) form: a layered solid where the 2D layers are linked by oxygen atoms (shown in red)
Hydrated uranyl peroxide formed by the addition of hydrogen peroxide to an aqueous solution of uranyl nitrate when heated to 200–225 °C forms an amorphous uranium trioxide which on heating to 400–450 °C will form alpha-uranium trioxide. It has been stated that the presence of nitrate will lower the temperature at which the exothermic change from the amorphous form to the alpha form occurs.
β (beta) UO3. This solid has a structure which defeats most attempts to describe it.
This form can be formed by heating ammonium diuranate, while P.C. Debets and B.O. Loopstra, found four solid phases in the UO3-H2O-NH3 system that they could all be considered as being UO2(OH)2.H2O where some of the water has been replaced with ammonia. No matter what the exact stoichiometry or structure, it was found that calcination at 500°C in air forms the beta form of uranium trioxide.
The γ (gamma) form, with the different uranium environments in green and yellow
The most frequently encountered polymorph is γ-UO3, whose x-ray structure has been solved from powder diffraction data. The compound crystallizes in the space group I41/amd with two uranium atoms in the asymmetric unit. Both are surrounded by somewhat distorted octahedra of oxygen atoms. One uranium atom has two closer and four more distant oxygen atoms whereas the other has four close and two more distant oxygen atoms as neighbors. Thus it is not incorrect to describe the structure as [UO2]2+[UO4]2- , that is uranyl uranate.
The environment of the uranium atoms shown as yellow in the gamma form
The chains of U2O2 rings in the gamma form in layers, alternate layers running at 90 degrees to each other. These chains are shown as containing the yellow uranium atoms, in an octahedral environment which are distorted towards square planar by an elongation of the axial oxygen-uranium bonds.
The delta (δ) form is a cubic solid where the oxygen atoms are arranged between the uranium atoms.
High pressure form
Several hydrates of uranium trioxide are known, e.g., UO3·6H2O.
Bond valence parameters
It is possible by bond valence calculations to estimate how great a contribution a given oxygen atom is making to the assumed valence of uranium. Bond valence calculations use parameters which are estimated after examining a large number of crystal structures of uranium oxides (and related uranium compounds), note that the oxidation states which this method provides are only a guide which assists in the understanding of a crystal structure.
The formula to use is
The sum of the s values is equal to the oxidation state of the metal centre.
For uranium binding to oxygen the constants RO and B are tabulated in the table below. For each oxidation state use the parameters from the table shown below.
Oxidation state RO B U(VI) 2.08 Å 0.35 U(V) 2.10 Å 0.35 U(IV) 2.13 Å 0.35
While uranium trioxide is encountered as a polymeric solid under ambient conditions, some work has been done on the molecular form in the gas phase, in matrix isolations studies, and computationally.
With increasing temperature the equilibrium is shifted to the right. This system has been studied at temperatures between 900 °C and 2500 °C. The vapor pressure of monomeric UO3 in equilibrium with air and solid U3O8 at ambient pressure, about 10−5 mbar (1 mPa) at 980 °C, rising to 0.1 mbar (10 Pa) at 1400 °C, 0.34 mbar (34 Pa) at 2100 °C, 1.9 mbar (193 Pa) at 2300 °C, and 8.1 mbar (809 Pa) at 2500 °C.
Infrared spectroscopy of molecular UO3 isolated in an argon matrix indicates a T-shaped structure (point group C2v) for the molecule. This is in contrast to the commonly encountered D3h molecular symmetry exhibited by most trioxides. From the force constants the authors deduct the U-O bond lengths to be between 1.76 and 1.79 Å (176 to 179 pm).
Calculations predict that the point group of molecular UO3 is C2v, with an axial bond length of 1.75 Å, an equatorial bond length of 1.83 Å and an angle of 161 ° between the axial oxygens. The more symmetrical D3h species is a saddle point, 49 kJ/mol above the C2v minimum. The authors invoke a second-order Jahn-Teller effect as explanation.
Uranium trioxide reacts at 400 °C with freon-12 to form chlorine, phosgene, carbon dioxide and uranium tetrafluoride. The freon-12 can be replaced with freon-11 which forms carbon tetrachloride instead of carbon dioxide. This is a case of a hard perhalogenated freon which is normally considered to be inert being converted chemically at a moderate temperature.
- 2 CF2Cl2 + UO3 → UF4 + CO2 + COCl2 + Cl2
- 4 CFCl3 + UO3 → UF4 + 3 COCl2 + CCl4 + Cl2
The reversible insertion of magnesium cations into the lattice of uranium trioxide by cyclic voltammetry using a graphite electrode modified with microscopic particles of the uranium oxide has been investigated. This experiment has also been done for U3O8. This is an example of electrochemistry of a solid modified electrode, the experiment which used for uranium trioxide is related to a carbon paste electrode experiment. It is also possible to reduce uranium trioxide with sodium metal to form sodium uranium oxides.
It has been the case that it is possible to insert lithium into the uranium trioxide lattice by electrochemical means, this is similar to the way that some rechargeable lithium ion batteries work. In these rechargeable cells one of the electrodes is a metal oxide which contains a metal such as cobalt which can be reduced, to maintain the electroneutrality for each electron which is added to the electrode material a lithium ion enters the lattice of this oxide electrode.
- As an acid
- UO3 + H2O → UO2−
4 + 2 H+
Dissolving uranium oxide in a strong base like sodium hydroxide forms the doubly negatively charged uranate anion (UO2−
4). Uranates tend to concatenate, forming diuranate, U2O2−
7, or other poly-uranates. Important diuranates include ammonium diuranate ((NH4)2U2O7), sodium diuranate (Na2U2O7) and magnesium diuranate (MgU2O7), which forms part of some yellowcakes. It is worth noting that uranates of the form M2UO4 do not contain UO2−
4 ions, but rather flattened UO6 octahedra, containing a uranyl group and bridging oxygens.
- As a base
- UO3 + H2O → UO2+
2 + 2 OH−
Dissolving uranium oxide in a strong acid like sulfuric or nitric acid forms the double positive charged uranyl cation. The uranyl nitrate formed (UO2(NO3)2·6H2O) is soluble in ethers, alcohols, ketones and esters; for example, tributylphosphate. This solubility is used to separate uranium from other elements in nuclear reprocessing, which begins with the dissolution of nuclear fuel rods in nitric acid. The uranyl nitrate is then converted to uranium trioxide by heating.
Uranium oxides in ceramics
UO3-based ceramics become green or black when fired in a reducing atmosphere and yellow to orange when fired with oxygen. Orange-coloured Fiestaware is a well-known example of a product with a uranium-based glaze. UO3-has also been used in formulations of enamel, uranium glass, and porcelain.
Prior to 1960, UO3 was used as an agent of crystallization in crystalline coloured glazes. It is possible to determine with a Geiger counter if a glaze or glass was made from UO3.
- ^ Sheft I, Fried S, Davidson N (1950). "Preparation of Uranium Trioxide". Journal of the American Chemical Society 72 (5): 2172–2173. doi:10.1021/ja01161a082.
- ^ a b c d Wheeler VJ, Dell RM, Wait E (1964). "Uranium trioxide and the UO3 hydrates". J. Inorganic Nuclear Chemistry 26 (11): 1829–1845. doi:10.1016/0022-1902(64)80007-5.
- ^ Dell RM, Wheeler VJ (1962). "Chemical Reactivity of Uranium Trioxide Part 1. — Conversion to U3O8, UO2 and UF4". Transactions of the Faraday Society 58: 1590–1607. doi:10.1039/TF9625801590.
- ^ Trueman ER, Black S, Read D, Hodson ME (2003) "Alteration of Depleted Uranium Metal" Goldschmidt Conference Abstracts, p. A493 abstract
- ^ Schoepite. Webmineral.com. Retrieved on 2011-07-19.
- ^ Ander L, Smith B (2002) "Annexe F: Groundwater transport modelling" The health hazards of depleted uranium munitions, part II (London: The Royal Society)
- ^ Smith B (2002) "Annexe G: Corrosion of DU and DU alloys: a brief discussion and review" The health hazards of depleted uranium munitions, part II (London: The Royal Society)
- ^ Morrow, PE, Gibb FR, Beiter HD (1972). "Inhalation studies of uranium trioxide". Health Physics 23 (3): 273–280. doi:10.1097/00004032-197209000-00001. PMID 4642950. abstract
- ^ Sutton M, Burastero SR (2004). "Uranium(VI) solubility and speciation in simulated elemental human biological fluids". Chemical Research in Toxicology 17 (11): 1468–1480. doi:10.1021/tx049878k. PMID 15540945.
- ^ Sato T (1963). "Preparation of uranium peroxide hydrates". Journal of Applied Chemistry 13 (8): 361. doi:10.1002/jctb.5010130807.
- ^ Debets PC, Loopstra BO (1963). "On the Uranates of Ammonium II: X-Ray Investigation of the Compounds in the system NH3-UO3-H2O". Journal of Inorganic Nuclear Chemistry 25 (8): 945. doi:10.1016/0022-1902(63)80027-5.
- ^ Debets PC (1966). "The Structure of β-UO3". Acta Crystallographica 21 (4): 589. doi:10.1107/S0365110X66003505.
- ^ Engmann R, de Wolff PM (1963). "The Crystal Structure of γ-UO3". Acta Crystallographica 16 (10): 993. doi:10.1107/S0365110X63002656.
- ^ M. T. Weller, P. G. Dickens, D. J. Penny (1988). "The structure of δ-UO3>". Polyhedron 7 (3): 243–244. doi:10.1016/S0277-5387(00)80559-8.
- ^ Siegel S, Hoekstra HR, Sherry E (1966). "The crystal structure of high-pressure UO3". Acta Crystallographica 20 (2): 292–295. doi:10.1107/S0365110X66000562.
- ^ Gmelin Handbuch (1982) U-C1, 129–135.
- ^ references. Kristall.uni-mki.gwdg.de. Retrieved on 2011-07-19.
- ^ Zachariasen (1978). "Bond lengths in oxygen and halogen compounds of d and f elements". J. Less Common Metals 62: 1–7. doi:10.1016/0022-5088(78)90010-3.
- ^ www.ccp14.ac.uk/ccp/web-mirrors/i_d_brown Free-download software. Ccp14.ac.uk. Retrieved on 2011-07-19.
- ^ www.ccp14.ac.uk/solution/bond_valence/ Free-download software mirror. Ccp14.ac.uk (2001-08-13). Retrieved on 2011-07-19.
- ^ Ackermann RJ, Gilles PW, Thorn RJ (1956). "High-Temperature Thermodynamic Properties of Uranium Dioxide". Journal of Chemical Physics 25 (6): 1089. doi:10.1063/1.1743156.
- ^ Alexander CA (2005). "Volatilization of urania under strongly oxidizing conditions". Journal of Nuclear Materials 346 (2–3): 312–318. doi:10.1016/j.jnucmat.2005.07.013.
- ^ Gabelnick SD, Reedy GT, Chasanov MG (1973). "Infrared spectra of matrix-isolated uranium oxide species. II: Spectral interpretation and structure of UO3". Journal of Chemical Physics 59 (12): 6397–6404. doi:10.1063/1.1680018.
- ^ Pyykkö P, Li J (1994). "Quasirelativistic pseudopotential study of species isoelectronic to uranyl and the equatorial coordination of uranyl". Journal of Physical Chemistry 98 (18): 4809–4813. doi:10.1021/j100069a007.
- ^ Booth HS, Krasny-Ergen W, Heath RE (1946). "Uranium Tetrafluoride". Journal of the American Chemical Society 68 (10): 1969–1970. doi:10.1021/ja01214a028.
- ^ Trofimov TI, Samsonov MD, Lee SC, Myasoedov BF, Wai CM (2001). "Dissolution of uranium oxides in supercritical carbon dioxide containing tri-n-butyl phosphate and thenoyltrifluoroacetone". Mendeleev Communications 11 (4): 129–130. doi:10.1070/MC2001v011n04ABEH001468.
- ^ Dueber, R. E. (1992). "Investigation of the Mechanism of Formation of Insertion Compounds of Uranium Oxides by Voltammetric Reduction of the Solid Phase after Mechanical Transfer to a Carbon Electrode". Journal of the Electrochemical Society 139 (9): 2363. doi:10.1149/1.2221232.
- ^ Dickens PG, Lawrence SD, Penny DJ, Powell AV (1989). "Insertion compounds of uranium oxides". Solid State Ionics 32–33: 77–83. doi:10.1016/0167-2738(89)90205-1.
- ^ Dickens, P.G. Hawke, S.V. Weller, M.T. (1985). "Lithium insertion into αUO3 and U3O8". Materials Research Bulletin 20 (6): 635–641. doi:10.1016/0025-5408(85)90141-2.
- ^ Dickens, P.G. Hawke, S.V. Weller, M.T. (1984). "Hydrogen insertion compounds of UO3". Materials Research Bulletin 19 (5): 543–547. doi:10.1016/0025-5408(84)90120-X.
- ^ Cotton, Simon (1991). Lanthanides and Actinides. New York: Oxford University Press. p. 128. ISBN 0195073665.
Wikimedia Foundation. 2010.
Look at other dictionaries:
uranium trioxide — noun : a brilliant orange compound UO3 that is formed in the course of refining uranium and that has been used as a coloring agent for ceramic wares * * * uranium trioxide, a red or yellow powder that is an intermediate in refining uranium and is … Useful english dictionary
Uranium — (pronEng|jʊˈreɪniəm) is a silvery gray metallic chemical element in the actinide series of the periodic table that has the symbol U and atomic number 92. It has 92 protons and 92 electrons, 6 of them valence electrons. It can have between 141 and … Wikipedia
Uranium in the environment — Uranium in the environment, this page is about the science of uranium in the environment and in animals (including humans). The legal and social issues associated with uranium are discussed elsewhere. This page is a subpage of actinides in the… … Wikipedia
Uranium oxide — is an oxide of the element uranium. The metal uranium forms several oxides: *Uranium dioxide or uranium(IV) oxide (UO2, the mineral Uraninite or pitchblende) *Uranium trioxide or uranium(VI) oxide (UO3) *Triuranium octaoxide (U3O8, the mineral… … Wikipedia
uranium oxide — noun : any of a series of oxides of uranium that are usually regarded as definite compounds but are better considered phases with a range of compositions: as a. : the dioxide UO2 or approximately UO2.0 2.6(?) obtained as a brown to black… … Useful english dictionary
uranium processing — Introduction preparation of the ore for use in various products. Uranium (U), although very dense (19.1 grams per cubic centimetre), is a relatively weak, nonrefractory metal. Indeed, the metallic properties of uranium appear to be… … Universalium
Uranium dioxide — Chembox new Name = Uranium dioxide ImageFile = UO2lattice.jpg IUPACName = Uranium dioxide Uranium(IV) oxide Section1 = Chembox Identifiers CASNo = 1344 57 6 Section2 = Chembox Properties Formula = UO2 MolarMass = 270 g/mol Solvent = other… … Wikipedia
Trioxyde d'uranium — Général No CAS … Wikipédia en Français
Depleted uranium — The DU penetrator of a 30 mm round Depleted uranium (DU; also referred to in the past as Q metal, depletalloy, or D 38) is uranium with a lower content of the fissile isotope U 235 than natural uranium (natural uranium is about 99.27% uranium… … Wikipedia
Natural uranium — (NU) refers to refined uranium with the same isotopic ratio as found in nature. It contains 0.7 % uranium 235, 99.3 % uranium 238, and a trace of uranium 234 by weight. In terms of the amount of radioactivity, approximately 2.2 %… … Wikipedia