Electro-pneumatic action

Electro-pneumatic action

The electro-pneumatic action is a control system for pipe organs, whereby air pressure, controlled by an electric current and operated by the keys of an organ console, opens and closes valves within wind chests, allowing the pipes to speak. This system also allows the console to be physically detached from the organ itself. The only connection was via an electrical cable from the console to the relay, with some early organ consoles utilizing a separate wind supply to operate combination pistons.

Invention

Although early experiments with Barker lever, tubular-pneumatic and electro-pneumatic actions date as far back as the 1850s, credit for a feasible design is generally given to the English organist and inventor, Robert Hope-Jones. He overcame the difficulties inherent in earlier designs by including a rotating centrifugal air blower and replacing banks of batteries with a DC generator, which provided electrical power to the organ and drove the blower. This allowed the construction of new pipe organs without any physical linkages whatsoever. Previous organs all used tracker action, which requires a mechanical linkage between the console and the organ.

Operation

When the organist selects a stop and depresses a key, an electric circuit is completed, causing a low-voltage current to flow from depressed key, through the stop-tab switch, and on through the cable to the electro-pneumatic relay. The relay interprets the command from the console and sends an electric current to the appropriate solenoid. The solenoid is energized, causing the pipe valve connected to it to open, which emits compressed air into the pipe, allowing the pipe to speak.

Drawbacks

A drawback to the system was in the large amount of wiring required for operation. With each stop tab and key being wired, the transmission cable could easily contain several hundred wires. The great number of wires required between the relay and the organ itself, with each solenoid requiring its own signal wire, made the situation worse, especially if a wire was broken (this was particularly true with consoles located on lifts and/or turntables), which made tracing the break very difficult.

These problems increased with the size of the instrument, and it would not be unusual for a particular organ to contain over a hundred miles of wiring. The largest pipe organ in the world, the Boardwalk Hall Auditorium Organ, is said to contain more than 137,500 miles of wire. Modern electronic switching has largely overcome these physical problems.

Many consider tracker action organs to be more sensitive to the player's control. But others find some tracker organs heavy to play, some tubular-pneumatic organs sluggish, and so prefer electro-pneumatic action.

Modern methods

In the years after the advent of the transistor, and later, integrated circuits and microprocessors, miles of wiring and electro-pneumatic relays have given way to electronic and computerized control and relay systems, which have made the control of pipe organs much more efficient. But for its time, the electro-pneumatic action was considered a great success, and even today modernized versions of this action are used in many new pipe organs.

Sources

* [http://www.organworks.com/web/about/OrgHistory.asp A Brief History of Electronics in Pipe Organs]
*Foort, Reginald, "The Cinema Organ," Second Edition, New York: The Vestral Press, 1970, pp 74-78.


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Direct electric action — is one of various systems used in pipe organs to control the flow of air (wind) into the organ s pipes when the corresponding keys or pedals are depressed. In direct electric action, the valves beneath the pipes are opened directly by electro… …   Wikipedia

  • Tracker action — is a term used in reference to pipe organs to indicate a mechanical linkage between keys or pedals pressed by the organist and the valve that allows air to flow into pipe(s) of the corresponding note. This is in contrast to electrical or electro… …   Wikipedia

  • Pneumatics — Pneumatic redirects here. For the highest order of humans in Gnosticism, see Pneumatic (Gnosticism). Preserved Porter Locomotive Company No. 3290 of 1923. Pneumatics is a branch of technology, which deals with the study and application of use of… …   Wikipedia

  • Theatre organ — Console of the 3/13 Barton Theatre Pipe Organ at Ann Arbor s Michigan Theatre A theatre organ (also known as a cinema organ) is a pipe organ originally designed specifically for imitation of an orchestra. New designs have tended to be around some …   Wikipedia

  • Organ — • A musical instrument which consists of one or several sets of pipes, each pipe giving only one tone, and which is blown and played by mechanical means. Catholic Encyclopedia. Kevin Knight. 2006. Organ     Organ …   Catholic encyclopedia

  • St George's Minster, Doncaster — Doncaster Minster St. George s Minster, Doncaster …   Wikipedia

  • Трактура (орган) — Игровая механическая трактура органа: абстракты, велленбретт; виндлада открыта Трактура (нем. Traktur, Orgeltraktur, фр. traction и tirage, англ. action; от …   Википедия

  • Трактура — Игровая механическая трактура органа: абстракты, велленбретт; виндлада открыта Трактура (нем. Traktur, Orgeltraktur, фр. t …   Википедия

  • Johnson Organs — The William A. Johnson Organ Company of Westfield, Massachusetts, which later became Johnson Son Organ Company was a highly respected firm which built 860 pipe organs throughout the United States and in Canada and Bermuda. The company operated… …   Wikipedia

  • Liverpool Metropolitan Cathedral — Church of Christ the King Liverpool Metropolitan Cathedral, Mou …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”