Combustion analysis


Combustion analysis

Combustion analysis is a method used in both organic chemistry and analytical chemistry to determine the elemental composition (more precisely empirical formula) of a pure organic compound by combusting the sample under conditions where the resulting combustion products can be quantitatively analyzed. Once the number of moles of each combustion product has been determined the empirical formula or a partial empirical formula of the original compound can be calculated.

Contents

History

The method was invented by Joseph Louis Gay-Lussac. Justus von Liebig studied the method while working with Gay-Lussac between 1822 and 1824 and improved the method in the following years to a level that it could used as standard procedure for organic analysis.[1]

Combustion train

A combustion train is an analytical tool for the determination of elemental composition of a chemical compound. With knowledge of elemental composition a chemical formula can be derived. The combustion train allows the determination of carbon and hydrogen in a succession of steps:

Analytical determination of the amounts of water and carbon dioxide produced from a known amount of sample gives the empirical formula. For every hydrogen atom in the compound 1/2 equivalent of water is produced, and for every carbon atom in the compound 1 equivalent of carbon dioxide is produced.

Nowadays, modern instruments are sufficiently automated to be able to do these analyses routinely. Samples required are also extremely small — 3 mg of sample is sufficient to give satisfactory CHN analysis.

See also

References

  1. ^ Frederic L. Holmes (1963). "Elementary Analysis and the Origins of Physiological Chemistry". Isis 54 (1): 50–81. doi:10.1086/349664. JSTOR 228728. 

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Combustion — This article is about the process of burning. For combustion without external ignition, see spontaneous combustion. For the engine used in mobile propulsion, see internal combustion engine. For the visible part of a fire, see flame. Burning… …   Wikipedia

  • combustion furnace — n. a furnace used in the laboratory to carry out elemental analysis of organic compounds * * * …   Universalium

  • combustion furnace — n. a furnace used in the laboratory to carry out elemental analysis of organic compounds …   English World dictionary

  • Combustion Integrated Rack — The training unit with the rack doors open in Payload Development Laboratory II at Johnson Space Center, Houston, Texas. The Combustion Integrated Rack (CIR) includes an optics bench, combustion chamber, fuel and oxidizer control, and five… …   Wikipedia

  • Elemental analysis — is a process where a sample of some material (e.g., soil, waste or drinking water, bodily fluids, minerals, chemical compounds) is analyzed for its elemental and sometimes isotopic composition. Elemental analysis can be qualitative (determining… …   Wikipedia

  • Analyse par combustion — L analyse par combustion est une méthode utilisée en chimie organique et en chimie analytique dans le but de déterminer la composition chimique des substances (plus précisément, leur formule empirique) de composés chimiques purs en provoquant… …   Wikipédia en Français

  • Gravimetric analysis — Infobox chemical analysis name = Gravimetric analysis caption =Analytical balance acronym = classification =Gravimetric analytes = Solids Liquids manufacturers = related = Precipitation Titration hyphenated = Gravimetric analysis describes a set… …   Wikipedia

  • Chemical looping combustion — (CLC) typically employs a dual fluidized bed system (circulating fluidized bed process) where a metal oxide is employed as a bed material providing the oxygen for combustion in the fuel reactor. The reduced metal is then transferred to the second …   Wikipedia

  • Staged combustion cycle (rocket) — Staged combustion rocket cycle. Usually, all of the fuel and a portion of the oxidizer are fed through the pre burner (fuel rich) to power the pumps. An oxygen rich circuit is possible also, but less common because of the metallurgy required. The …   Wikipedia

  • Spectrum analysis — also known as Emission Spectrochemical Analysis is the original scientific method of charting and analyzing the chemical properties of matter and gases by looking at the bands in their optical spectrum. The empirical laws of spectrum analysis are …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.