Structural steel

Structural steel
Various structural steel shapes

Structural steel is steel construction material, a profile, formed with a specific shape or cross section and certain standards of chemical composition and mechanical properties. Structural steel shape, size, composition, strength, storage, etc., is regulated in most industrialized countries.

Structural steel members, such as I-beams, have high second moments of area, which allow them to be very stiff in respect to their cross-sectional area.

Contents

Common structural shapes

In most developed countries, the shapes available are set out in published standards, although a number of specialist and proprietary cross sections are also available.

A steel I-beam, in this case used to support wood joists in a house.
  • I-beam (I-shaped cross-section - in Britain these include Universal Beams (UB) and Universal Columns (UC); in Europe it includes the IPE, HE, HL, HD and other sections; in the US it includes Wide Flange (WF) and H sections)
  • Z-Shape (half a flange in opposite directions)
  • HSS-Shape (Hollow structural section also known as SHS (structural hollow section) and including square, rectangular, circular (pipe) and elliptical cross sections)
  • Angle (L-shaped cross-section)
  • Channel ( [-shaped cross-section)
  • Tee (T-shaped cross-section)
  • Rail profile (asymmetrical I-beam)
  • Bar, a piece of metal, rectangular cross sectioned (flat) and long, but not so wide so as to be called a sheet.
  • Rod, a round or square and long piece of metal or wood, see also rebar and dowel.
  • Plate, metal sheets thicker than 6 mm or 14 in.
  • Open web steel joist

While many sections are made by hot or cold rolling, others are made by welding together flat or bent plates (for example, the largest circular hollow sections are made from flat plate bent into a circle and seam-welded).

Standards

Standard structural steels (Europe)

Most steels used throughout Europe are specified to comply with the European standard EN 10025. However, many national standards also remain in force.[citation needed]

Typical grades are described as 'S275J2' or 'S355K2W'. In these examples, 'S' denotes structural rather than engineering steel; 275 or 355 denotes the yield strength in newtons per square millimetre or the equivalent megapascals; J2 or K2 denotes the materials toughness by reference to Charpy impact test values; and the 'W' denotes weathering steel. Further letters can be used to designate fine grain steel ('N' or 'NL'); quenched and tempered steel ('Q' or 'QL'); and thermomechanically rolled steel ('M' or 'ML').

The normal yield strength grades available are 195, 235, 275, 355, 420, and 460, although some grades are more commonly used than others e.g. in the UK, almost all structural steel is grades S275 and S355. Higher grades are available in quenched and tempered material (500, 550, 620, 690, 890 and 960 - although grades above 690 receive little if any use in construction at present).

Standard structural steels (USA)

Steels used for building construction in the US use standard alloys identified and specified by ASTM International. These steels have an alloy identification beginning with A and then two, three, or four numbers. The four-number AISI steel grades commonly used for mechanical engineering, machines, and vehicles are a completely different specification series.

The standard commonly used structural steels are:[1]

Carbon steels

  • A36 - structural shapes and plate
  • A53 - structural pipe and tubing
  • A500 - structural pipe and tubing
  • A501 - structural pipe and tubing
  • A529 - structural shapes and plate

High strength low alloy steels

  • A441 - structural shapes and plates
  • A572 - structural shapes and plates
  • A618 - structural pipe and tubing
  • A992 - W shapes beams only
  • A270 - structural shapes and plates

Corrosion resistant high strength low alloy steels

  • A242 - structural shapes and plates
  • A588 - structural shapes and plates

Quenched and tempered alloy steels

  • A514 - structural shapes and plates
  • A517 - boilers and pressure vessels

CE Marking

The concept of CE Marking for all construction products and steel products is introduced by the Construction Products Directive (CPD). The CPD is a European Directive that ensures the free movement of all construction products within the European Union.

Because steel components are “safety critical”, CE Marking is not allowed unless the Factory Production Control (FPC) system under which they are produced has been assessed by a suitable certification body that has been approved to the European Commission.[2]

In the case of steel products such as sections, bolts and fabricated steelwork the CE Marking demonstrates that the product complies with the relevant harmonized standard.[3]

For steel structures the main harmonized standards are:

  • Steel sections and plate - EN 10025-1
  • Hollow sections - EN 10219-1 and EN 10210-1
  • Pre-loadable bolts - EN 14399-1
  • Non-preloadable bolts - EN 15048-1
  • Fabricated steel - EN EN 1090 -1

The standard that covers CE Marking of structural steelwork is EN 1090-1. The standard has come in to force in late 2010. After a transition period of two years, CE Marking will become mandatory in most European Countries sometime early in 2012.[4] The official end date of the transition period is July 1st 2012.

Steel vs. concrete

As raw material prices fluctuate, often so does building design. During times of lower steel prices, more steel and less concrete is used, and vice versa. Each set of vendors and users typically maintain national industry associations that advocate the use of its materials versus the other. However, both materials are typically used together. Concrete without steel reinforcement (usually ribbed round bars called rebar) crumbles under tensile loads. Steel on its own, without composite or reinforced concrete floors, is likewise not a preferred building method.

While rebar is almost always steel, it is not considered a structural steel and is described separately in the reinforcement bar and reinforced concrete articles.

While both steel structures and reinforced concrete cement (R.C.C) structures have their pros and cons, the steel structures have better strength-to-weight ratios than RCC and can be easily dismantled. Steel structures, which have bolted connections, can also be reused to some extent after dismantling.

Thermal properties

The properties of steel vary widely, depending on its alloying elements.

The austenizing temperature, the temperature where a steel transforms to an austenite crystal structure, for steel starts at 900°C for pure iron, then, as more carbon is added, the temperature falls to a minimum 724°C for eutectic steel (steel with only .83% by weight of carbon in it). As 2.1% carbon (by mass) is approached, the austenizing temperature climbs back up, to 1130°C. Similarly, the melting point of steel changes based on the alloy.

The lowest temperature at which a plain carbon steel can begin to melt, its solidus, is 1130 °C. Steel never turns into a liquid below this temperature. Pure Iron ('Steel' with 0% Carbon) starts to melt at 1492 °C (2720 °F), and is completely liquid upon reaching 1539 °C (2802 °F). Steel with 2.1% Carbon by weight begins melting at 1130 °C (2066 °F), and is completely molten upon reaching 1315 °C (2400 °F). 'Steel' with more than 2.1% Carbon is no longer Steel, but is known as Cast iron.[5]

Fire resistance

Metal deck and open web steel joist receiving spray fireproofing plaster, made of polystyrene leavened gypsum.

Steel loses strength when heated sufficiently. The critical temperature of a steel member is the temperature at which it cannot safely support its load. Building codes and structural engineering standard practice defines different critical temperatures depending on the structural element type, configuration, orientation, and loading characteristics. The critical temperature is often considered the temperature at which its yield stress has been reduced to 60% of the room temperature yield stress.[6] In order to determine the fire resistance rating of a steel member, accepted calculations practice can be used,[7] or a fire test can be performed, the critical temperature of which is set by the standard accepted to the Authority Having Jurisdiction, such as a building code. In Japan, this is below 400°C[citation needed]. In China, Europe and North America (e.g., ASTM E-119), this is approximately 1000–1300F[8] (530-810C). The time it takes for the steel element that is being tested to reach the temperature set by the test standard determines the duration of the fire-resistance rating. Heat transfer to the steel can be slowed by the use of fireproofing materials, thus limiting steel temperature. Common fireproofing methods for structural steel include intumescent, endothermic and plaster coatings as well as drywall, calcium silicate cladding, and mineral or high temperature insulation mineral wool blanket.

Concrete building structures often meet code required fire-resistance ratings, as the concrete thickness over the steel rebar provides sufficient fire resistance. However, concrete can be subject to spalling, particularly if it has an elevated moisture content. Although additional fireproofing is not often applied to concrete building structures, it is sometimes used in traffic tunnels and locations where a hydrocarbon fuel fire is more likely, as flammable liquid fires provides more heat to the structural element as compared to a fire involving ordinary combustibles during the same fire period. Structural steel fireproofing materials include intumescent, endothermic and plaster coatings as well as drywall, calcium silicate cladding, and mineral or high temperature insulation wool blankets. Attention is given to connections, as the thermal expansion of structural elements can compromise fire-resistance rated assemblies.

Manufacturing

Cutting workpieces to length is usually done with a bandsaw.

A beam drill line (drill line) has long been considered an indispensable way to drill holes and mill slots into beams, channels and HSS elements. CNC beam drill lines are typically equipped with feed conveyors and position sensors to move the element into position for drilling, plus probing capability to determine the precise location where the hole or slot is to be cut.

For cutting irregular openings or non-uniform ends on dimensional (non-plate) elements, a cutting torch is typically used. Oxy-fuel torches are the most common technology and range from simple hand-held torches to automated CNC coping machines that move the torch head around the structural element in accordance with cutting instructions programmed into the machine.

Fabricating flat plate is performed on a plate processing center where the plate is laid flat on a stationary 'table' and different cutting heads traverse the plate from a gantry-style arm or "bridge." The cutting heads can include a punch, drill or torch.

See also

References

  1. ^ Manual of Steel Construction, 8th Edition, 2nd revised printing, American Institute of Steel Construction, 1987, ch 1 page 1-5
  2. ^ The website of the British Constructional Steelwork Association Ltd. - SteelConstruction.org:CE-Marking.08/02/2011.
  3. ^ Guide to the CE Marking of Structural Steelwork, BCSA Publication No. 46/08. p.1.
  4. ^ Manufacturer Certification in Compliance with EN 1090, 09.08.2011
  5. ^ http://www.msm.cam.ac.uk/phase-trans/images/FeC.gif
  6. ^ Industrial fire protection engineering, Robert G. Zalosh, copyright 2003 pg.58
  7. ^ Zalosh, Pg. 70
  8. ^ Zalosh, Table 3.3

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Structural steel — (a) Rolled steel in structural shapes. (b) A kind of strong mild steel, suitable for structural shapes. [Webster 1913 Suppl.] …   The Collaborative International Dictionary of English

  • structural steel — konstrukcinis plienas statusas T sritis chemija apibrėžtis Mašinų gamyboje naudojamo anglinio ir legiruotojo plieno bendras pavadinimas. atitikmenys: angl. structural steel rus. конструкционная сталь …   Chemijos terminų aiškinamasis žodynas

  • structural steel — noun Date: 1884 1. rolled steel in structural shapes 2. steel suitable for structural shapes …   New Collegiate Dictionary

  • structural steel — 1. the variety of steel shapes rolled for use in construction. 2. a steel having a composition suitable for such shapes. [1890 95] * * * …   Universalium

  • structural steel — noun a strong steel that is rolled into shapes that are used in construction • Hypernyms: ↑steel …   Useful english dictionary

  • structural steel — noun strong mild steel in shapes suited to construction work …   English new terms dictionary

  • Fabrication of structural steel by plasma and laser cutting — Fabrication of dimensional (non flat) structural steel elements has historically been performed by sequential operations involving sawing, drilling and high temperature flame cutting to remove material. Each of these operations is performed on… …   Wikipedia

  • Steel frame — usually refers to a building technique with a skeleton frame of vertical steel columns and horizontal I beams, constructed in a rectangular grid to support the floors, roof and walls of a building which are all attached to the frame. The… …   Wikipedia

  • Steel design — Steel design, or more specifically, structural steel design, is an area of knowledge of structural engineering used to design steel structures. The structures can range from schools to homes to bridges. There are currently two schools of thought… …   Wikipedia

  • Structural shape rolling — is a metalworking forming process in which structural shapes are passed through rollers to bend or deform the workpiece to a desired shape, while maintaining a constant cross section.It is a cost effective way of bending this kind of material… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”