Electrical resistivity tomography

Electrical resistivity tomography

Electrical resistivity tomography (ERT) or electrical resistivity imaging (ERI) is a geophysical technique for imaging sub-surfaces structures from electrical measurements made at the surface, or by electrodes in one or more boreholes. It is closely related to the medical imaging technique electrical impedance tomography (EIT), and mathematically is the same inverse problem. In contrast to medical EIT however ERT is essentially a direct current method. A related geophysical method, induced polarization, measures the transient response. The technique evolved from techniques of electrical prospecting that predate digital computers, where layers or anomalies were sought rather than images.Early work on the mathematical problem in the 1930s assumed a layered medium (see for example Langer, Slichter). Tikhonov who is best known for his work on regularization of inverse problems also worked on this problem. He explains in detail how to solve the ERT problem in a simple case of 2-layered medium. During the 1940s he collaborated with geophyicists and without the aid of computers they discovered large deposits of copper. As a result they were awarded a State Prize of Soviet Union.

When adequate computers became widely available the inverse problem of ERT could be solved numerically, and the work of Loke and Barker at Birmingham University was among the first such solution, and their approach is still widely used.

Applications of ERT include mineral prospecting, monitoring of ground water flow and archeology

In industrial process imaging ERT can be used in a similar fashion to medical EIT, to image the distribution of conductivity in mixing vessels and pipes. In this context it is usually called "Electrical Resistance Tomography", emphasising the quantity that is measured rather than imaged.

ee Also

* Magnetotellurics
* Telluric current

References

*R.E. Langer, On an inverse problem in differential equations, Bull Am Math Soc , 39, pp814--820, 1933.
*L.B. Slichter, The interpretation of the resistivity prospecting method for horizontal structures, J Appl Phys, v4, pp307--322, 1933.
*R.E. Langer, On determination of earth conductivity from observed surface potentials, Bull Am Math Soc, 10, pp747--754, 1936.
* AN Tikhonov, On the Uniqueness of the problem of electrical prospecting, Dokl. Acad. Nauk. SSSR, 69, 797-800, 1949. (in Russian)
*A P Calderón On an inverse boundary value problem, in Seminar on Numerical Analysis and its Applications to Continuum Physics, Rio de Janeiro. 1980. [http://www.maths.manchester.ac.uk/~bl/Calderon/ Scanned copy of paper]
*cite book |last=Loke |first=M. H. |title=Tutorial: 2-D and 3-D electrical imaging surveys |year=2004 |url=http://www.geoelectrical.com/coursenotes.zip |format=PDF |accessdate=2007-06-11
*M. H. Loke, and R. D. Barker , Rapid least-squares inversion of apparent resistivity pseudo-sections using quasi-Newton method: Geophysical Prospecting, 48, 181-152, 1996.
*M. H. Loke, and R.D. Barker , Practical techniques for 3D resistivity surveys and data inversion: Geophysical prospecting, 44, 499-523, 1996.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Electrical impedance tomography — (EIT), is a medical imaging technique in which an image of the conductivity or permittivity of part of the body is inferred from surface electrical measurements. Typically conducting electrodes are attached to the skin of the subject and small… …   Wikipedia

  • Electrical resistivity and conductivity — This article is about electrical conductivity in general. For the specific conductance of aqueous solutions, see Conductivity (electrolytic). For other types of conductivity, see Conductivity. Electrical resistivity (also known as resistivity,… …   Wikipedia

  • Tomography — Basic principle of tomography: superposition free tomographic cross sections S1 and S2 compared with the projected image P Tomography refers to imaging by sections or sectioning, through the use of any kind of penetrating wave. A device used in… …   Wikipedia

  • Resistivity — Electrical resistivity (also known as specific electrical resistance) is a measure of how strongly a material opposes the flow of electric current. A low resistivity indicates a material that readily allows the movement of electrical charge. The… …   Wikipedia

  • Electrical conductivity — or specific conductivity is a measure of a material s ability to conduct an electric current. When an electrical potential difference is placed across a conductor, its movable charges flow, giving rise to an electric current. The conductivity σ… …   Wikipedia

  • Magnetotellurics — Magnetotelluric station Magnetotellurics (MT) is an electromagnetic geophysical method of imaging the earth s subsurface by measuring natural variations of electrical and magnetic fields at the Earth s surface. Investigation depth ranges from… …   Wikipedia

  • Near-surface geophysics — is the use of geophysical methods to investigate small scale features in the shallow (tens of meters) subsurface. It is closely related to applied geophysics or exploration geophysics. Methods used include seismic refraction and reflection,… …   Wikipedia

  • Industrial process imaging — Industrial Process Imaging, or Industrial Process Tomography are methods use to form an image of a cross section of vessel or pipe in a chemical engineering or mineral processing, or petroleum extraction or refining plant. [ McCann, H and Scott,… …   Wikipedia

  • List of materials analysis methods — List of materials analysis methods: Contents: Top · 0–9 · A B C D E F G H I J K L M N O P Q R S T U V W X Y Z μSR see Muon spin spectroscopy …   Wikipedia

  • Archaeological geophysics — most often refers to geophysical survey techniques used for archaeological imaging or mapping. More broadly defined, the term could refer to any geophysical techniques applied to archaeology. Remote sensing and marine surveys are also used in… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”