SD26

Infobox Locomotive
name=SD26
powertype=Diesel-electric
gauge=RailGauge|ussg


caption=Santa Fe #4654, one of eighty SD26 rebuilds, descends the Cajon Pass on December 31, 1975. The unit's "blower bulge" (just aft of the cab) and displaced roof-mounted "torpedo tube" air reservoirs, its signature features, are clearly visible.
builder=General Motors Electro-Motive Division (EMD);
rebuilt by the Atchison, Topeka and Santa Fe Railway
aarwheels=C-C
cylindercount=V16
primemover=EMD 16-645E3
builddate=January 1973 —
January 1978
totalproduction=80
locale=North America
poweroutput=2,650 hp (1,968 kW)
topspeed=89 mph (143 km/h)
weight=328,000 lb (128,000 kg)
tractiveeffort=82,000 lbf (365 kN)
length=60 ft 8.5 in (18.50 m)
enginetype=2-stroke diesel
aspiration=Turbocharger
cylindersize=9.1 in × 10 in
(231 mm × 254 mm)
displacement=169.1 in³ (10,320 L)
transmission=DC generator,
DC traction motors
locobrakes=Straight air / Dynamic
trainbrakes=XR air
buildmodel=SD26
railroad=Santa Fe Railway,
Guilford Rail System
disposition=All but two scrapped

The SD26 was an EMD SD24 diesel locomotive that was specially modified by the Atchison, Topeka and Santa Fe Railway in the mid-1970s. In an effort to spare the cost of purchasing new motive power, the Santa Fe elected to expand on the success of its CF7 and other capital conversion programs and extend the life of its fleet of 80 aging SD24s by rebuilding them at its San Bernardino, California workshops from January, 1973 through January, 1978.

The rebuilt locomotives saw service throughout much of the Santa Fe system. Over half the SD26s were retired by Santa Fe in 1985 and replaced with state-of-the-art equipment, while a year later the remaining units were sold to Guilford Transportation Industries (now Pan Am Railways), two of which are still in service today.

History

Development

The first locomotive to go through the SD26 Program was Santa Fe #4533, a 2,400 hp (1,800 kW) C-C unit built by General Motors' Electro-Motive Division of between 1958–1960, which entered the San Bernadino shops in January, 1973.

Its four roof-mounted "torpedo tube" air reservoir tanks were removed to allow for the installation of a new inertial air filtering system (SD24s lacked a central air filtration system), which was located directly behind the locomotive cab. The resulting "blower bulge" or "hump" became the most obvious visual identifier of the SD26. Two of the air tanks were reinstalled toward the back roof on either side of the radiator section fans, while the other pair was situated on either side of the dynamic brake fans.

The original EMD 16-567D3 prime mover was removed and replaced with the newer EMD 16-645E3 engine,Fact|date=April 2007 which boosted the horsepower rating to 2,650 and gave rise to the "26" designation. The SD24's unreliable electrical system was replaced with upgraded circuitry, consisting of new wiring harnesses and EMD's new "Dash 2" circuit cards. The unit was retrofitted with extended-range dynamic brakes as well.

The footboards were reconfigured, the locomotive bell was removed from the front pilot and mounted midway between the radiator fans and dynamic brake fans, and a roof-mounted beacon and cab air conditioning system was installed. The unit retained its one-piece windshield and nose-mounted locomotive classification lights. When all of the modifications were complete, the locomotive was given a fresh coat of "Yellowbonnet" paint and reassigned as #4633 (all SD26s were given a 100-place "bump" in numbering to reflect their new class).

Over the next 5 years, all of the SD24s on Santa Fe's roster would undergo similar modifications (the last one being #4508) though not all received air conditioning, which was omitted from the following units: #4603, #4604, #4607, #4608, #4620, #4623, #4625, #4629–#4631, #4636–#4638, #4640, #4643, #4646, #4648, #4651, #4652, #4655, #4656, #4659, #4663, #4665, #4668, #4671, #4674, #4677, and #4678.

ubsequent alterations

In the early-1980s, all of the stock one-piece windshields were replaced with two-piece units similar to those used on the EMD GP20, a move intended to bring standardization of windshield glass to several classes of Santa Fe locomotives and thereby reduce maintenance stockpiles. A "second generation" EMD-style traction motor blower housing was fitted to the left side of later rebuilds.

Ten of the units (#4601, #4603–#4607, #4612, #4617, #4618, and #4675) were outfitted as "drone" or "slug" units for work in the Kansas City and Barstow hump yards. Ten others (#4611, #4627, #4629, #4640, #4645, #4648, #4667, #4674, #4677, and #4678) were configured with Remote Control Equipment (RCE) for use in coal, grain, potash, and molten sulfur unit train service.

In service

The majority of SD26s were placed in both general freight and intermodal service in the Kansas City — La Junta — Albuquerque — El Paso freight pool, while others spent their years running up and down the railroad's Coast Lines. The units became known as "slushbuckets" among railfans in reference to their distinctive turbocharger sound, which was considerably more subdued than that produced by either the EMD GP40 or SD40, both of which utilized the same powerplant. #4625 was wrecked near Rustler Springs, Texas in August of 1974 and was subsequently sent to the scrap yard.

Afterlife

Changing philosophies regarding motive power expenditures led the Santa Fe to begin trimming its SD26 roster in the Spring of 1985, when 44 of the locomotives were retired and traded to EMD in exchange for 15 new GP50s. The other 35 units were sold off at the end of 1986 for use on the Guilford Rail System (GRS), which, at last count, had two of the units in operation (#621 and #643; former Santa Fe #4607 and #4673).

References

* Includes background information and a photo gallery.
*
*
* Volhard, Jim (2001). "Build a Santa Fe SD26." "Model Railroader" 68 (8) 68–74.

ee also

* Beep (SWBLW)
* CF7
* List of GM-EMD locomotives

External links

* [http://rlehmer.50megs.com/photos/ATSF/atsf4628_sanberdoo.html A photo of three SD26s in action on August 17, 1984]
* [http://www.trainweb.org/greggfuhriman/sd26.html SD26] from "Selected Portfolios of Scale Models" created by Gregg Fuhriman.