Statistical inference

Statistical inference

In statistics, statistical inference is the process of drawing conclusions from data that are subject to random variation, for example, observational errors or sampling variation.[1] More substantially, the terms statistical inference, statistical induction and inferential statistics are used to describe systems of procedures that can be used to draw conclusions from datasets arising from systems affected by random variation.[2] Initial requirements of such a system of procedures for inference and induction are that the system should produce reasonable answers when applied to well-defined situations and that it should be general enough to be applied across a range of situations.

The outcome of statistical inference may be an answer to the question "what should be done next?", where this might be a decision about making further experiments or surveys, or about drawing a conclusion before implementing some organizational or governmental policy.

Contents

Introduction

Scope

For the most part, statistical inference makes propositions about populations, using data drawn from the population of interest via some form of random sampling. More generally, data about a random process is obtained from its observed behavior during a finite period of time. Given a parameter or hypothesis about which one wishes to make inference, statistical inference most often uses:

  • a statistical model of the random process that is supposed to generate the data, and
  • a particular realization of the random process; i.e., a set of data.

The conclusion of a statistical inference is a statistical proposition. Some common forms of statistical proposition are:

  • an estimate; i.e., a particular value that best approximates some parameter of interest,
  • a confidence interval (or set estimate); i.e., an interval constructed from the data in such a way that, under repeated sampling of datasets, such intervals would contain the true parameter value with the probability at the stated confidence level,
  • a credible interval; i.e., a set of values containing, for example, 95% of posterior belief,
  • rejection of a hypothesis[3]
  • clustering or classification of data points into groups

Comparison to descriptive statistics

Statistical inference is generally distinguished from descriptive statistics. In simple terms, descriptive statistics can be thought of as being just a straightforward presentation of facts, in which modeling decisions made by a data analyst have had minimal influence. A complete statistical analysis will nearly always include both descriptive statistics and statistical inference, and will often progress in a series of steps where the emphasis moves gradually from description to inference.

Models/Assumptions

Any statistical inference requires some assumptions. A statistical model is a set of assumptions concerning the generation of the observed data and similar data. Descriptions of statistical models usually emphasize the role of population quantities of interest, about which we wish to draw inference.[4]

Degree of models/assumptions

Statisticians distinguish between three levels of modeling assumptions;

  • Fully parametric: The probability distributions describing the data-generation process are assumed to be fully described by a family of probability distributions involving only a finite number of unknown parameters.[4] For example, one may assume that the distribution of population values is truly Normal, with unknown mean and variance, and that datasets are generated by 'simple' random sampling. The family of generalized linear models is a widely used and flexible class of parametric models.
  • Non-parametric: The assumptions made about the process generating the data are much less than in parametric statistics and may be minimal.[5] For example, every continuous probability distribution has a median, which may be estimated using the sample median or the Hodges-Lehmann-Sen estimator, which has good properties when the data arise from simple random sampling.
  • Semi-parametric: This term typically implies assumptions 'between' fully and non-parametric approaches. For example, one may assume that a population distribution have a finite mean. Furthermore, one may assume that the mean response level in the population depends in a truly linear manner on some covariate (a parametric assumption) but not make any parametric assumption describing the variance around that mean (i.e., about the presence or possible form of any heteroscedasticity). More generally, semi-parametric models can often be separated into 'structural' and 'random variation' components. One component is treated parametrically and the other non-parametrically. The well-known Cox model is a set of semi-parametric assumptions.

Importance of valid models/assumptions

Whatever level of assumption is made, correctly calibrated inference in general requires these assumptions to be correct; i.e., that the data-generating mechanisms really has been correctly specified.

Incorrect assumptions of 'simple' random sampling can invalidate statistical inference.[6] More complex semi- and fully parametric assumptions are also cause for concern. For example, incorrectly assuming the Cox model can in some cases lead to faulty conclusions.[7] Incorrect assumptions of Normality in the population also invalidates some forms of regression-based inference.[8] The use of any parametric model is viewed skeptically by most experts in sampling human populations: "most sampling statisticians, when they deal with confidence intervals at all, limit themselves to statements about [estimators] based on very large samples, where the central limit theorem ensures that these [estimators] will have distributions that are nearly normal."[9] In particular, a normal distribution "would be a totally unrealistic and catastrophically unwise assumption to make if we were dealing with any kind of economic population."[9] Here, the central limit theorem states that the distribution of the sample mean "for very large samples" is approximately normally distributed, if the distribution is not heavy tailed.

Approximate distributions

Given the difficulty in specifying exact distributions of sample statistics, many methods have been developed for approximating these.

With finite samples, approximation results measure how close a limiting distribution approaches the statistic's sample distribution: For example, with 10,000 independent samples the normal distribution approximates (to two digits of accuracy) the distribution of the sample mean for many population distributions, by the Berry–Esseen theorem.[10] Yet for many practical purposes, the normal approximation provides a good approximation to the sample-mean's distribution when there are 10 (or more) independent samples, according to simulation studies, and statisticians' experience.[10] Following Kolmogorov's work in the 1950s, advanced statistics uses approximation theory and functional analysis to quantify the error of approximation. In this approach, the metric geometry of probability distributions is studied; this approach quantifies approximation error with, for example, the Kullback–Leibler distance, Bregman divergence, and the Hellinger distance.[11][12][13]

With infinite samples, limiting results like the central limit theorem describe the sample statistic's limiting distribution, if one exists. Limiting results are not statements about finite samples, and indeed are logically irrelevant to finite samples.[14][15][16] However, the asymptotic theory of limiting distributions is often invoked for work in estimation and testing. For example, limiting results are often invoked to justify the generalized method of moments and the use of generalized estimating equations, which are popular in econometrics and biostatistics. The magnitude of the difference between the limiting distribution and the true distribution (formally, the 'error' of the approximation) can be assessed using simulation:.[17] The use of limiting results in this way works well in many applications, especially with low-dimensional models with log-concave likelihoods (such as with one-parameter exponential families).

Randomization-based models

For a given dataset that was produced by a randomization design, the randomization distribution of a statistic (under the null-hypothesis) is defined by evaluating the test statistic for all of the plans that could have been generated by the randomization design. In frequentist inference, randomization allows inferences to be based on the randomization distribution rather than a subjective model, and this is important especially in survey sampling and design of experiments.[18][19] Statistical inference from randomized studies is also more straightforward than many other situations.[20][21][22] In Bayesian inference, randomization is also of importance: in survey sampling, use of sampling without replacement ensures the exchangeability of the sample with the population; in randomized experiments, randomization warrants a missing at random assumption for covariate information.[23]

Objective randomization allows properly inductive procedures.[24][25][26][27] Many statisticians prefer randomization-based analysis of data that was generated by well-defined randomization procedures.[28] (However, it is true that in fields of science with developed theoretical knowledge and experimental control, randomized experiments may increase the costs of experimentation without improving the quality of inferences.[29][30]) Similarly, results from randomized experiments are recommended by leading statistical authorities as allowing inferences with greater reliability than do observational studies of the same phenomena.[31] However, a good observational study may be better than a bad randomized experiment.

The statistical analysis of a randomized experiment may be based on the randomization scheme stated in the experimental protocol and does not need a subjective model.[32][33]

However, not all hypotheses can be tested by randomized experiments or random samples, which often require a large budget, a lot of expertise and time, and may have ethical problems.

Model-based analysis of randomized experiments

It is standard practice to refer to a statistical model, often a normal linear model, when analyzing data from randomized experiments. However, the randomization scheme guides the choice of a statistical model. It is not possible to choose an appropriate model without knowing the randomization scheme.[19] Seriously misleading results can be obtained analyzing data from randomized experiments while ignoring the experimental protocol; common mistakes include forgetting the blocking used in an experiment and confusing repeated measurements on the same experimental unit with independent replicates of the treatment applied to different experimental units.[34]

Modes of inference

Different schools of statistical inference have become established. These schools (or 'paradigms') are not mutually exclusive, and methods which work well under one paradigm often have attractive interpretations under other paradigms. The two main paradigms in use are frequentist and Bayesian inference, which are both summarized below.

Frequentist inference

This paradigm calibrates the production of propositions[clarification needed (complicated jargon)] by considering (notional) repeated sampling of datasets similar to the one at hand. By considering its characteristics under repeated sample, the frequentist properties of any statistical inference procedure can be described — although in practice this quantification may be challenging.

Examples of frequentist inference

Frequentist inference, objectivity, and decision theory

Frequentist inference calibrates[clarification needed] procedures, such as tests of hypothesis and constructions of confidence intervals, in terms of frequency probability; that is, in terms of repeated sampling from a population. (In contrast, Bayesian inference calibrates procedures with regard to epistemological uncertainty, described as a probability measure)

The frequentist calibration[clarification needed] of procedures can be done without regard to utility functions. However, some elements of frequentist statistics, such as statistical decision theory, do incorporate utility functions. In particular, frequentist developments of optimal inference (such as minimum-variance unbiased estimators, or uniformly most powerful testing) make use of loss functions, which play the role of (negative) utility functions. Loss functions must be explicitly stated for statistical theorists to prove that a statistical procedure has an optimality property. For example, median-unbiased estimators are optimal under absolute value loss functions, and least squares estimators are optimal under squared error loss functions.

While statisticians using frequentist inference must choose for themselves the parameters of interest, and the estimators/test statistic to be used, the absence of obviously explicit utilities and prior distributions has helped frequentist procedures to become widely viewed as 'objective'.

Bayesian inference

The Bayesian calculus describes degrees of belief using the 'language' of probability; beliefs are positive, integrate to one, and obey probability axioms. Bayesian inference uses the available posterior beliefs as the basis for making statistical propositions. There are several different justifications for using the Bayesian approach.

Examples of Bayesian inference

Bayesian inference, subjectivity and decision theory

Many informal Bayesian inferences are based on "intuitively reasonable" summaries of the posterior. For example, the posterior mean, median and mode, highest posterior density intervals, and Bayes Factors can all be motivated in this way. While a user's utility function need not be stated for this sort of inference, these summaries do all depend (to some extent) on stated prior beliefs, and are generally viewed as subjective conclusions. (Methods of prior construction which do not require external input have been proposed but not yet fully developed.)

Formally, Bayesian inference is calibrated with reference to an explicitly stated utility, or loss function; the 'Bayes rule' is the one which maximizes expected utility, averaged over the posterior uncertainty. Formal Bayesian inference therefore automatically provides optimal decisions in a decision theoretic sense. Given assumptions, data and utility, Bayesian inference can be made for essentially any problem, although not every statistical inference need have a Bayesian interpretation. Analyses which are not formally Bayesian can be (logically) incoherent; a feature of Bayesian procedures which use proper priors (i.e., those integrable to one) is that they are guaranteed to be coherent. Some advocates of Bayesian inference assert that inference must take place in this decision-theoretic framework, and that Bayesian inference should not conclude with the evaluation and summarization of posterior beliefs.

Other modes of inference (besides frequentist and Bayesian)

Information and computational complexity

Other forms of statistical inference have been developed from ideas in information theory[35] and the theory of Kolmogorov complexity.[36] For example, the minimum description length (MDL) principle selects statistical models that maximally compress the data; inference proceeds without assuming counterfactual or non-falsifiable 'data-generating mechanisms' or probability models for the data, as might be done in frequentist or Bayesian approaches.

However, if a 'data generating mechanism' does exist in reality, then according to Shannon's source coding theorem it provides the MDL description of the data, on average and asymptotically.[37] In minimizing description length (or descriptive complexity), MDL estimation is similar to maximum likelihood estimation and maximum a posteriori estimation (using maximum-entropy Bayesian priors). However, MDL avoids assuming that the underlying probability model is known; the MDL principle can also be applied without assumptions that e.g. the data arose from independent sampling.[37][38] The MDL principle has been applied in communication-coding theory in information theory, in linear regression, and in time-series analysis (particularly for chosing the degrees of the polynomials in Autoregressive moving average (ARMA) models).[38]

Information-theoretic statistical inference has been popular in data mining, which has become a common approach for very large observational and heterogeneous datasets made possible by the computer revolution and internet.[36]

The evaluation of statistical inferential procedures often uses techniques or criteria from computational complexity theory or numerical analysis.[39][40]

Fiducial inference

Fiducial inference was an approach to statistical inference based on fiducial probability, also known as a "fiducial distribution". In subsequent work, this approach has been called ill-defined, extremely limited in applicability, and even fallacious.[41][42] However this argument is the same as that which shows[43] that a so-called confidence distribution is not a valid probability distribution and, since this has not invalidated the application of confidence intervals, it does not necessarily invalidate conclusions drawn from fiducial arguments.

Structural inference

Developing ideas of Fisher and of Pitman from 1938 to 1939,[44] George A. Barnard developed "structural inference" or "pivotal inference",[45] an approach using invariant probabilities on group families. Barnard reformulated the arguments behind fiducial inference on a restricted class of models on which "fiducial" procedures would be well-defined and useful.

Inference topics

The topics below are usually included in the area of statistical inference.

  1. Statistical assumptions
  2. Statistical decision theory
  3. Estimation theory
  4. Statistical hypothesis testing
  5. Revising opinions in statistics
  6. Design of experiments, the analysis of variance, and regression
  7. Survey sampling
  8. Summarizing statistical data

See also

Notes

  1. ^ Upton, G., Cook, I. (2008) Oxford Dictionary of Statistics, OUP. ISBN 978-0-19-954145-4
  2. ^ Dodge, Y. (2003) The Oxford Dictionary of Statistical Terms, OUP. ISBN 0-19-920613-9 (entry for "inferential statistics")
  3. ^ According to Peirce, acceptance means that inquiry on this question ceases for the time being. In science, all scientific theories are revisable
  4. ^ a b Cox (2006) page 2
  5. ^ van der Vaart, A.W. (1998) Asymptotic Statistics Cambridge University Press. ISBN 0-521-78450-6 (page 341)
  6. ^ Kruskal, William (December 1988). "Miracles and Statistics: The Casual Assumption of Independence (ASA Presidential address)". Journal of the American Statistical Association 83 (404): 929–940. JSTOR 2290117. 
  7. ^ Freedman, D.A. (2008) "Survival analysis: An Epidemiological hazard?". The American Statistician (2008) 62: 110-119. (Reprinted as Chapter 11 (pages 169–192) of: Freedman, D.A. (2010) Statistical Models and Causal Inferences: A Dialogue with the Social Sciences (Edited by David Collier, Jasjeet S. Sekhon, and Philip B. Stark.) Cambridge University Press. ISBN 9780521123907)
  8. ^ Berk, R. (2003) Regression Analysis: A Constructive Critique (Advanced Quantitative Techniques in the Social Sciences) (v. 11) Sage Publications. ISBN 0-761-92904-5
  9. ^ a b Brewer, Ken (2002). Combined Survey Sampling Inference: Weighing of Basu's Elephants. Hodder Arnold. p. 6. ISBN 0340692294, 978-0340692295. 
  10. ^ a b Jörgen Hoffman-Jörgensen's Probability With a View Towards Statistics, Volume I. Page 399[Full citation needed]
  11. ^ Le Cam (1986)[page needed]
  12. ^ Erik Torgerson (1991) Comparison of Statistical Experiments, volume 36 of Encyclopedia of Mathematics. Cambridge University Press.[Full citation needed]
  13. ^ Liese, Friedrich and Miescke, Klaus-J. (2008). Statistical Decision Theory: Estimation, Testing, and Selection. Springer. ISBN 0387731938. [citation needed]
  14. ^ Kolmogorov (1963a) (Page 369): "The frequency concept, based on the notion of limiting frequency as the number of trials increases to infinity, does not contribute anything to substantiate the applicability of the results of probability theory to real practical problems where we have always to deal with a finite number of trials". (page 369)
  15. ^ "Indeed, limit theorems 'as n tends to infinity' are logically devoid of content about what happens at any particular n. All they can do is suggest certain approaches whose performance must then be checked on the case at hand." — Le Cam (1986) (page xiv)
  16. ^ Pfanzagl (1994): "The crucial drawback of asymptotic theory: What we expect from asymptotic theory are results which hold approximately . . . . What asymptotic theory has to offer are limit theorems."(page ix) "What counts for applications are approximations, not limits." (page 188)
  17. ^ Pfanzagl (1994) : "By taking a limit theorem as being approximately true for large sample sizes, we commit an error the size of which is unknown. [. . .] Realistic information about the remaining errors may be obtained by simulations." (page ix)
  18. ^ Neyman, J.(1934) "On the two different aspects of the representative method: The method of stratified sampling and the method of purposive selection", Journal of the Royal Statistical Society, 97 (4), 557–625 JSTOR 2342192
  19. ^ a b Hinkelmann and Kempthorne(2008)[page needed]
  20. ^ ASA Guidelines for a first course in statistics for non-statisticians. (available at the ASA website)
  21. ^ David A. Freedman et alia's Statistics.
  22. ^ David S. Moore and George McCabe. Introduction to the Practice of Statistics.
  23. ^ Gelman, Rubin. Bayesian Data Analysis.
  24. ^ Peirce (1877-1878)
  25. ^ Peirce (1883)
  26. ^ David Freedman et alia Statistics and David A. Freedman Statistical Models.
  27. ^ Rao, C.R. (1997) Statistics and Truth: Putting Chance to Work, World Scientific. ISBN 9810231113
  28. ^ Peirce, Freedman, Moore and McCabe.[citation needed]
  29. ^ Box, G.E.P. and Friends (2006) Improving Almost Anything: Ideas and Essays, Revised Edition, Wiley. ISBN 978-0-471-72755-2
  30. ^ Cox (2006), page 196
  31. ^ ASA Guidelines for a first course in statistics for non-statisticians. (available at the ASA website)
    • David A. Freedman et alia's Statistics.
    • David S. Moore and George McCabe. Introduction to the Practice of Statistics.
  32. ^ Neyman, Jerzy. 1923 [1990]. "On the Application of Probability Theory to AgriculturalExperiments. Essay on Principles. Section 9." Statistical Science 5 (4): 465–472. Trans. Dorota M. Dabrowska and Terence P. Speed.
  33. ^ Hinkelmann & Kempthorne (2008)[page needed]
  34. ^ Hinkelmann and Kempthorne (2008) Chapter 6.
  35. ^ Soofi (2000)
  36. ^ a b Hansen & Yu (2001)
  37. ^ a b Hansen and Yu (2001), page 747.
  38. ^ a b Rissanen (1989), page 84
  39. ^ Joseph F. Traub, G. W. Wasilkowski, and H. Wozniakowski. (1988)[page needed]
  40. ^ Judin and Nemirovski.
  41. ^ Neyman (1956)
  42. ^ Zabell (1992)}
  43. ^ Cox (2006) page 66
  44. ^ Davison, page 12.[Full citation needed]
  45. ^ Barnard, G.A. (1995) "Pivotal Models and the Fiducial Argument", International Statistical Review, 63 (3), 309–323. JSTOR 1403482

References

Further reading

  • Casella, G., Berger, R.L. (2001). Statistical Inference. Duxbury Press. ISBN 0534243126
  • David A. Freedman. "Statistical Models and Shoe Leather" (1991). Sociological Methodology, vol. 21, pp. 291–313.
  • David A. Freedman. Statistical Models and Causal Inferences: A Dialogue with the Social Sciences. 2010. Edited by David Collier, Jasjeet S. Sekhon, and Philip B. Stark. Cambridge University Press.
  • Kruskal, William (December 1988). "Miracles and Statistics: The Casual Assumption of Independence (ASA Presidential address)". Journal of the American Statistical Association 83 (404): 929–940. JSTOR 2290117. 
  • Lenhard, Johannes (2006). "Models and Statistical Inference: The Controversy between Fisher and Neyman—Pearson," British Journal for the Philosophy of Science, Vol. 57 Issue 1, pp. 69–91.
  • Lindley, D. (1958). "Fiducial distribution and Bayes' theorem", Journal of the Royal Statistical Society, Series B, 20, 102–7
  • Sudderth, William D. (1994). "Coherent Inference and Prediction in Statistics," in Dag Prawitz, Bryan Skyrms, and Westerstahl (eds.), Logic, Methodology and Philosophy of Science IX: Proceedings of the Ninth International Congress of Logic, Methodology and Philosophy of Science, Uppsala, Sweden, August 7–14, 1991, Amsterdam: Elsevier.
  • Trusted, Jennifer (1979). The Logic of Scientific Inference: An Introduction, London: The Macmillan Press, Ltd.
  • Young, G.A., Smith, R.L. (2005) Essentials of Statistical Inference, CUP. ISBN 0-521-83971-8

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем сделать НИР

Look at other dictionaries:

  • Statistical Inference for Stochastics Processes — Annales de l ISUP Pays  France Langue anglais Périodicité trimestrielle Genre revue scientifique Date de fondat …   Wikipédia en Français

  • statistical inference — The process by which results from a sample may be applied more generally to a population. More precisely, how inferences may be drawn about a population, based on results from a sample of that population. Inferential statistics are generally… …   Dictionary of sociology

  • statistical inference — noun Drawing conclusions about a population from a random sample drawn from it, or, more generally, about a random process from its observed behavior during a finite period of time …   Wiktionary

  • statistical inference — determination of general results from a partial survey …   English contemporary dictionary

  • statistical inference — noun : the making of estimates concerning a population from information gathered from samples …   Useful english dictionary

  • Inference — is the act or process of deriving a conclusion based solely on what one already knows. Inference is studied within several different fields. * Human inference (i.e. how humans draw conclusions) is traditionally studied within the field of… …   Wikipedia

  • Statistical hypothesis testing — This article is about frequentist hypothesis testing which is taught in introductory statistics. For Bayesian hypothesis testing, see Bayesian inference. A statistical hypothesis test is a method of making decisions using data, whether from a… …   Wikipedia

  • Statistical dispersion — In statistics, statistical dispersion (also called statistical variability or variation) is variability or spread in a variable or a probability distribution. Common examples of measures of statistical dispersion are the variance, standard… …   Wikipedia

  • inference — /in feuhr euhns, freuhns/, n. 1. the act or process of inferring. 2. something that is inferred: to make rash inferences. 3. Logic. a. the process of deriving the strict logical consequences of assumed premises. b. the process of arriving at some …   Universalium

  • Statistical model — A statistical model is a formalization of relationships between variables in the form of mathematical equations. A statistical model describes how one or more random variables are related to one or more random variables. The model is statistical… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”