- Spinning (textiles)
Spinning is an ancient textile art in which plant, animal or synthetic
fibers are twisted together to form yarn(or thread, rope, or cable). For thousands of years, fiber was spun by hand using simple tools, the spindle and distaff. Only in the High Middle Agesdid the spinning wheelincrease the output of individual spinners, and mass-production only arose in the 18th century with the beginnings of the Industrial Revolution. Hand-spinning remains a popular handicraft.
Characteristics of spun yarn vary based on the material used, fiber length and alignment, quantity of fiber used, and degree of twist.
Roscheider Hof, Open Air Museum] The origins of spinning fiber to make string or yarn are lost in time, but archaeological evidence in the form of representation of string skirts has been dated to the Upper Paleolithicera, some 20,000 years ago. [Barber, "Women's Work", 42-45.] In the most primitive type of spinning, tufts of animal hair or plant fiber are rolled down the thigh with the hand, and additional tufts are added as needed until the desired length of spun fiber was achieved. Later, the fiber was fastened to a stone which was twirled round until the yarn was sufficiently twisted, whereupon it was wound upon the stone and the process repeated over and over.
The next method of twisting yarn was with the "spindle", a straight stick eight to twelve inches long on which the thread was wound after twisting. At first it had a cleft or split in the top in which the thread was fixed; later a hook of bone was added to the upper end. The bunch of wool or plant fibers is held in the left hand; with the right hand the fibers are drawn out several inches and the end fastened securely in the slit or hook on the top of the spindle. A whirling motion is given to the spindle on the thigh or any convenient part of the body; the spindle is then dropped, twisting the yarn, which is wound on the upper part of the spindle. Another bunch of fibers is drawn out, the spindle is given another twirl, the yarn is wound on the spindle, and so on.
The "distaff" was used for holding the bunch of wool, flax, or other fibers. It was a short stick on one end of which was loosely wound the raw material. The other end of the distaff was held in the hand, under the arm or thrust in the girdle of the spinner. When held thus, one hand was left free for drawing out the fibers.
A spindle containing a quantity of yarn rotates more easily, steadily and continues longer than an empty one, hence the next improvement was the addition of a weight called a
spindle whorlat the bottom of the spindle. These whorls are discs of wood, stone, clay, or metalwith a hole in the center for the spindle, which keep the spindle steady and promote its rotation. Spindle whorls appeared in the Neolithicera.Watson, "Textiles and Clothing", p. 3-14] . [Barber, "Women's Work", 37.]
Modern powered spinning, originally done by water or
steam powerbut now done by electricity, is vastly faster than hand-spinning.
spinning jenny, a multi- spoolspinning wheel invented circa 1764 by James Hargreaves, dramatically reduced the amount of work needed to produce yarn, with a single worker able to work eight or more spools at once. At roughly the same time, Richard Arkwrightand a team of craftsmen developed the spinning frame, which produced a stronger thread than the spinning jenny. Too large to be operated by hand, a spinning frame powered by a waterwheelbecame the water frame.
Samuel Cromptoncombined elements of the spinning jenny and water frame to create the spinning mule. This produced a stronger thread, and was suitable for mechanisation on a grand scale.
In the 20th century, new techniques including
Open End spinningor rotorspinning were invented to produce yarns at rates in excess of 40 meters per second.
Characteristics of spun yarns
Yarn can be, and is, spun from a wide variety of materials, including
natural fibers such as animal, plant, and mineralfibers, and synthetic fibers. It was probably first made from plant fibers, but animal fibers soon followed.
Twist and ply
The direction in which the yarn is spun is called "twist". Yarns are characterized as Z-twist or S-twist according to the direction of spinning (see diagram). Tightness of twist is measured in TPI (twists per inch or turns per inch) [Kadolph, Sara J., ed.: "Textiles", 10th edition, Pearson/Prentice-Hall, 2007, ISBN 0-13-118769-4, p. 197]
Two or more spun yarns may be twisted together or "plied" to form a thicker yarn. Generally, handspun single plies are spun with a Z-twist, and plying is done with an S-twist. [http://joyofhandspinning.com/yarn-plied.shtml "Plying Yarn with a Spinning Wheel"] , The Joy of Handspinning]
Yarns can be made of two, three, four, or more plies, or may be used as "singles" without plying. Two-ply yarn can also be plied from both ends of one long strand of singles using Andean plying, in which the single is first wound around one hand in a specific manner that allows unwinding both ends at once without tangling. Navajo plying is another method of producing a three-ply yarn, in which one strand of singles is looped around itself in a manner similar to crochet and the resulting three parallel strands twisted together. This method is often used to keep colors together on singles dyed in sequential colors. Cabled yarns are usually four-ply yarns made by plying two strands of two-ply yarn together in the direction opposite to the plying direction for the two-ply yarns.
Contemporary hand spinning
Hand-spinning is still an important skill in many traditional societies.
Hobbyor small scale artisan spinners spin their own yarn to control specific yarn qualities and produce yarn that is not widely available commercially, but can be found online and in many local yarn stores. Handspinners also may spin for self-sufficiency, a sense of accomplishment, or a sense of connection to history and the land. In addition, they may take up spinning for its meditative qualities.
Within the recent past, many new spinners have joined into this ancient process, innovating the craft and creating new techniques. From using many new applications of dyeing before spinning, to mixing in random elements (Christmas Garland, eccentric beads, money, etc.) that would not be in a traditional yarn, to creating new techniques like coiling [http://www.knitty.com/ISSUEsummer06/KScoil.html "Toil, Toil, Coils and Bubbles"] , Knitty Magazine ] , this craft is constantly evolving and shifting.
To make various yarns, besides adding random elements, spinners can vary all the same things as in a machined yarn, i.e. the fiber, the preparation, the color, the spinning technique, the direction of the twist, etc. A common misconception is yarn spun from
rolags may not be as strong, but the strength of a yarn is actually based on the length of hair fiber and the degree of twist. When working with shorter hairs, such as llama or angora rabbit, the spinner may choose to integrate longer fibers, such as mohair, to prevent yarn breakage. Yarns made of shorter fibers are thus also given more twist than yarns of longer fibers, and are generally spun with the short draw technique.
The fiber can be dyed at any time, but is often dyed before carding or after the yarn has been spun.
Wool may be spun before or after washing, although excessive amounts of
lanolinmay make spinning difficult, especially when using a drop-spindle. Careless washing may cause felting; when done prior to spinning this often leads to unusable wool fiber. In washing wool the key thing to avoid is too much agitation and fast temperature changes from hot to cold. Generally washing is done lock by lock in warm water with dish-soap.
A tightly spun
woolyarn with no air in it is called worsted; it is handspun from a rovingor combed top, and the fibers all lie in the same direction as the yarn. A woolenyarn, in contrast, is handspun from a rolag, where the fibers are not as strictly aligned to the yarn created. The woolen yarn thus captures much more air, and makes for a softer and generally bulkier yarn. There are two main techniques to create these different yarns; short draw creates worstedyarns, and long draw creates woolenyarns. Often a spinner will spin using a combination of both techniques, and thus make a semi-worsted yarn. [http://www.textilelinks.com/author/rb/971014.html "Woolen, Semi-Woolen, Semi-Worsted, Worsted Spinning"] ]
Short draw spinning is used to create
worstedyarns. It is spun from combed roving, sliver or wool top. The spinner keeps their hands very close to each other. The fibers are held, fanned out, in one hand, and the other hand pulls a small number from the mass. The twist is kept between the second hand and the wheel- there is never any twist between the two hands.
Long draw is spun from a carded
rolag. The rolag is spun without much stretching of the fibers from the cylindrical configuration. This is done by allowing twist into a short section of the rolag, and then pulling back, without letting the rolag change position in your hands, until the yarn is the desired thickness. The twist will concentrate in the thinnest part of the roving, thus when the yarn is pulled, the thicker sections with less twist will tend to thin out. Once the yarn is the desired thickness, enough twist is added to make the yarn strong. Then the yarn is wound onto the bobbin, and the process starts again.
pinning in the grease
Handspinners are split, when spinning wool, as to whether it is better to spin it 'in the grease' (with
lanolinstill in) or after it has been washed. More traditional spinners are more willing to spin in the grease, as it is less work to wash the wool after it is in yarn form. Spinners who spin very fine yarn may also prefer to spin in the grease as it can allow them to spin finer yarns with more ease. Spinning in the grease covers the spinner's hands in lanolin, and thus softens the spinner's hands.
Spinning in the grease only works really well if the fleece is newly sheared. After several months the lanolin becomes sticky, which makes it harder to spin using the short draw technique, and almost impossible to spin using the long draw technique. In general, spinners using the long draw technique do not spin in the grease.
Spinners who don't spin in the grease generally buy their fibers pre-washed and carded, in the form of
towor roving. This means less work for the spinner, as they do not have to wash the lanolin out. It also means that one can spin predyed fiber, or blends of fibers, which are very hard to create when the wool is still in the grease. As machine carders cannot card wool in the grease, pre-carded yarn generally isn't spun in the grease. Some spinners, however, use spray on lanolin-like products to get the same feel of spinning in the grease with this carded fiber.
: "This article contains text from the 1907 edition of "Textiles and Clothing" by Kate Heinz Watson, a document now in the
* Amos, Alden (2001). "The Alden Amos Big Book of Handspinning," Loveland, Colorado: Interweave Press. [http://en.wikipedia.org/w/index.php?title=Special%3ABooksources&isbn=1883010888 ISBN 1883010888]
* Barber, Elizabeth Wayland (1995). "Women's Work: The First 20,000 Years: Women, Cloth, and Society in Early Times", W. W. Norton & Company, new edition, 1995.
* Boeger, Alexis (2005). "Handspun Revolution," Pluckyfluff. [http://en.wikipedia.org/w/index.php?title=Special%3ABooksources&isbn=0976725207 ISBN 0976725207]
* Jenkins, David, editor (2003). "The Cambridge History of Western Textiles", Cambridge, UK: Cambridge University Press, ISBN 0521341078
*Piponnier, Françoise, and Perrine Mane (1997). "Dress in the Middle Ages"; Yale UP; ISBN 0300069065
* Ross, Mabel (1987). "Essentials of Handspinning," Robin and Russ Handweavers. [http://en.wikipedia.org/w/index.php?title=Special%3ABooksources&isbn=0950729205 ISBN 0950729205]
* Simmons, Paula (1982). "Spinning for Softness and Speed," Seattle: Madrona. [http://en.wikipedia.org/w/index.php?title=Special%3ABooksources&isbn=0914842870 ISBN 0914842870]
* Watson, Kate Heinz (1907). "Textiles and Clothing", Chicago: American School of Home Economics (online at [http://www.gutenberg.org/etext/21534 "Textiles and Clothing" by Kate Heintz Watson] ).
* [http://www.interweave.com/spin/resources/spinning_guilds/default.asp Spinning Guilds Directory] - An international list of spinning guilds
* [http://www.yarnmuseum.com/index.html Yarn Museum] - Online gallery promoting handspun yarn.
* [http://textiletechnology.bravehost.com A complete spinning website] - Learn about Blow room,carding,spinning, Fiber testing, Textile calculations etc
* [http://www.hants.org.uk/HantsGuildWSD/spinning.htm Hampshire Spinning Guild] - glossary of spinning terms, and pictures
* [http://www.joyofhandspinning.com/ Joy of Hand Spinning] - video instruction
* [http://www.interweave.com/spin/Spinning_Basics.asp Spin-Off Magazine Spinning Basics] - A list of PDF articles from the magazine on various spinning techniques.
* [http://www.yarnwench.com/php/Navajo3PlyTutorial.php Navajo 3-ply Tutorial] - plying video instruction
* [http://www.deliberatelife.com/index.php?option=com_content&task=view&id=169&Itemid=68 Drop Spinning Instructions] - step by step from carding to troubleshooting
Wikimedia Foundation. 2010.
Look at other dictionaries:
TEXTILES — In the biblical period garments were produced from both animal and vegetable materials. The most common garments were made of animal furs, especially of the less expensive sheepskin and goatskin, though rarer skins were also used. The pelts were… … Encyclopedia of Judaism
Spinning wheel — For the computer animation commonly found on the Internet, see Spinning wheel (animation). For the Blood, Sweat Tears song, see Spinning Wheel (song). Irish spinning wheel around 1900 Library of Congress collection A spinning wheel is a device… … Wikipedia
Spinning mule — A pair of Condenser spinning mules. These have 741 spindles, being cut down from 133 feet (41 m) 1122 spindles they used to have up until the 24th Sept 1974, when they were retired from Elk Mill, Royton. The mule was built by Platt Brothers … Wikipedia
Textiles — Textile Pour les articles homonymes, voir Textile (homonymie). « la fileuse » (œuvre de William … Wikipédia en Français
spinning — spinningly, adv. /spin ing/, n. 1. Textiles. a. the act or process of converting staple or short lengths of fiber, as cotton or rayon, into continuous yarn or thread. b. the extrusion of a solution of fiber forming substances through holes in a… … Universalium
Spinning jenny — The spinning jenny is a multi spool spinning wheel. It was invented circa 1764 by James Hargreaves in Stanhill, near Blackburn, Lancashire in the northwest of England (although Thomas Highs is another candidate identified as the inventor). The… … Wikipedia
Spinning Jenny — Mule jenny Une machine à filer plus ancienne, la spinning jenny de James Hargreaves, 1765 … Wikipédia en Français
spinning wheel — a device formerly used for spinning wool, flax, etc., into yarn or thread, consisting essentially of a single spindle driven by a large wheel operated by hand or foot. [1375 1425; late ME] * * * Early machine for turning textile fibre into thread … Universalium
Spinning frame — The spinning frame was an invention developed during the 18th century British Industrial Revolution. It was later developed into the water frame (patented in 1769), and was used to increase production of textiles in factories.Richard Arkwright… … Wikipedia
TEXTILES — The use of plant fibers for ropes, nets, baskets, and coverings is very ancient and attested in the ancient Near East from the early Paleolithic and the Neolithic periods (Ohalo, Jericho, and Nahal Hemar) onward, in regions where the dry… … Historical Dictionary of Mesopotamia