# Optical telescope

﻿
Optical telescope
Eight Inch refracting telescope (Chabot Space and Science Center)

An optical telescope is a telescope which is used to gather and focus light mainly from the visible part of the electromagnetic spectrum for directly viewing a magnified image for making a photograph, or collecting data through electronic image sensors.

There are three primary types of optical telescope: Refractors which use lenses (dioptrics), reflectors which use mirrors (catoptrics), and catadioptric telescopes which use both lenses and mirrors in combination.

A telescope's light gathering power and ability to resolve small detail is directly related to the diameter (or aperture) of its objective (the primary lens or mirror that collects and focuses the light). The larger the objective, the more light the telescope can collect and the finer detail it can resolve.

## History

The telescope is more a discovery of optical craftsmen than an invention of scientist.[1][2] The lens and the properties of refracting and reflecting light had been known since antiquity and theory on how they worked were developed by ancient Greek philosophers, preserved and expanded on in the medieval Islamic world, and had reached a significantly advanced state by the time of the telescope's invention in early modern Europe.[3][4] But the most significant step cited in the invention of the telescope was the development of lens manufacture for spectacles,[2][5][6] first in Venice and Florence in the thirteenth century,[7] and later in the spectacle making centers in both the Netherlands and Germany.[8] It is in the Netherlands in 1608 where the first recorded optical telescopes (refracting telescopes) appeared. The invention is credited to the spectacle makers Hans Lippershey and Zacharias Janssen in Middelburg, and the instrument-maker and optician Jacob Metius of Alkmaar.[9]

Galileo greatly improved upon these designs the following year and is generally credited with being the first to use a telescope for astronomical purposes. Galileo's telescope used Hans Lippershey's design of a convex objective lens and a concave eye lens and this design has come to be called a Galilean telescope. Johannes Kepler proposed an improvement on the design[10] that used a convex eyepiece, often called the Keplerian Telescope.

The next big step in the development of refractors was the advent of the Achromatic lens in the early 18th century[11] that corrected chromatic aberration seen in Keplerian telescopes up to that time, allowing for much shorter instruments with much larger objectives.

For reflecting telescopes, which use a curved mirror in place of the objective lens, theory preceded practice. The theoretical basis for curved mirrors behaving similar to lenses was probably established by Alhazen, whose theories had been widely disseminated in Latin translations of his work.[12] Soon after the invention of the refracting telescope Galileo, Giovanni Francesco Sagredo, and others, spurred on by their knowledge that curved mirrors had similar properties as lenses, discussed the idea of building a telescope using a mirror as the image forming objective.[13] The potential advantages of using parabolic mirrors (primarily a reduction of spherical aberration with elimination of chromatic aberration) led to several proposed designs for reflecting telescopes,[14] the most notable of which was published in 1663 by James Gregory and came to be called the Gregorian telescope,[15][16] but no working models were built. Isaac Newton has been generally credited with constructing the first practical reflecting telescopes, the Newtonian telescope, in 1668[17] although due to their difficulty of construction and the poor performance of the speculum metal mirrors used it took over 100 years for reflectors to become popular. Many of the advances in reflecting telescopes included the perfection of parabolic mirror fabrication in the 18th century,[18] silver coated glass mirrors in the 19th century, long-lasting aluminum coatings in the 20th century,[19] segmented mirrors to allow larger diameters, and active optics to compensate for gravitational deformation. A mid-20th century innovation was catadioptric telescopes such as the Schmidt camera, which uses both a lens (corrector plate) and mirror as primary optical elements, mainly used for wide field imaging without spherical aberration.

The late 20th century has seen the development of adaptive optics and space telescopes to overcome the problems of astronomical seeing.

## Principles

For detailed information on specific designs of reflecting, refracting, and catadioptric telescopes: see the main articles on Reflecting telescopes, Refracting telescopes, and Catadioptrics.

The basic scheme is that the primary light-gathering element the objective (1) (the convex lens or concave mirror used to gather the incoming light), focuses that light from the distant object (4) to a focal plane where it forms a real image (5). This image may be recorded or viewed through an eyepiece (2) which acts like a magnifying glass. The eye (3) then sees an inverted magnified virtual image (6) of the object.

Schematic of a Keplerian refracting telescope

### Inverted images

All refracting and most reflecting telescope designs are said to produce an inverted image at the focal plane; these are referred to as inverting telescopes. In fact, the image is both inverted and reverted, or rotated 180 degrees from the object orientation. In astronomical telescopes the rotated view is normally not corrected, since it does not affect how the telescope is used. However, a mirror diagonal is often used to place the eyepiece in a more convenient viewing location, and in that case the image is erect but everted (reversed left to right). In terrestrial telescopes such as Spotting scopes, monoculars and binoculars, prisms (e.g., Porro prisms), or a relay lens between objective and eyepiece are used to correct the image orientation. There are telescope designs that do not present an inverted image such as the Galilean refractor and the Gregorian reflector. These are referred to as erecting telescopes.

### Design variants

Many types of telescope fold or divert the optical path with secondary or tertiary mirrors. These may be integral part of the optical design (Newtonian telescope, Cassegrain reflector or similar types), or may simply be used to place the eyepiece or detector at a more convenient position. Telescope designs may also use specially designed additional lenses or mirrors to improved image quality over a larger field of view.

## Angular resolution

Ignoring blurring of the image by turbulence in the atmosphere (atmospheric seeing) and optical imperfections of the telescope, the angular resolution of an optical telescope is determined by the diameter of the objective, termed its "aperture" (the primary mirror, or lens.) The Rayleigh criterion for the resolution limit αR (in radians) is given by

$\sin(\alpha_R) = 1.22 \frac{\lambda}{D}$

where λ is the wavelength and D is the aperture. For visible light (λ = 550 nm) in the small-angle approximation, this equation can be rewritten:

$\alpha_R = \frac{138}{D}$

Here, αR denotes the resolution limit in arcseconds and D is in millimeters. In the ideal case, the two components of a double star system can be discerned even if separated by slightly less than αR. This is taken into account by the Dawes limit

$\alpha_D = \frac{116}{D}$

The equation shows that, all else being equal, the larger the aperture, the better the angular resolution. The resolution is not given by the maximum magnification (or "power") of a telescope. Telescopes marketed by giving high values of the maximum power often deliver poor images.

For large ground-based telescopes, the resolution is limited by atmospheric seeing. This limit can be overcome by placing the telescopes above the atmosphere, e.g., on the summits of high mountains, on balloon and high-flying airplanes, or in space. Resolution limits can also be overcome by adaptive optics, speckle imaging or lucky imaging for ground-based telescopes.

Recently, it has become practical to perform aperture synthesis with arrays of optical telescopes. Very high resolution images can be obtained with groups of widely-spaced smaller telescopes, linked together by carefully controlled optical paths, but these interferometers can only be used for imaging bright objects such as stars or measuring the bright cores of active galaxies. Example images of starspots on Betelgeuse can be seen here.

## Focal length and f-ratio

The focal length determines how wide an angle the telescope can view with a given eyepiece or size of a CCD detector or photographic plate. The f-ratio (or focal ratio, or f-number) of a telescope is the ratio between the focal length and the aperture (i.e., diameter) of the objective. Thus, for a given aperture (light-gathering power), low f-ratios indicate wide fields of view. Wide-field telescopes (such as astrographs) are used to track satellites and asteroids, for cosmic-ray research, and for astronomical surveys of the sky. It is more difficult to reduce optical aberrations in telescopes with low f-ratio than in telescopes with larger f-ratio.

## Light-gathering power

The light-gathering power (or light grasp) of an optical telescope is directly related to the square of the diameter (or aperture) of the objective lens or mirror. Note that the area of a circle is proportional to the square of the radius. A telescope with a lens which has a diameter three times that of another will have nine times the light-gathering power. Larger objectives gather more light, and more sensitive imaging equipment can produce better images from less light.

For a survey of a given area, the field of view is just as important as raw light gathering power. Survey telescopes such as Large Synoptic Survey Telescope therefore try to maximize the product of mirror area and field of view (or etendue) rather than raw light gathering ability alone.

## Imperfect images

No telescope can form a perfect image. Even if a reflecting telescope could have a perfect mirror, or a refracting telescope could have a perfect lens, the effects of aperture diffraction are unavoidable. In reality, perfect mirrors and perfect lenses do not exist, so image aberrations in addition to aperture diffraction must be taken into account. Image aberrations can be broken down into two main classes, monochromatic, and polychromatic. In 1857, Philipp Ludwig von Seidel (1821–1896) decomposed the first order monochromatic aberrations into five constituent aberrations. They are now commonly referred to as the five Seidel Aberrations.

### The five Seidel aberrations

Spherical aberration
The difference in focal length between paraxial rays and marginal rays, proportional to the square of the aperture.
Coma
A most objectionable defect by which points are imaged as comet-like asymmetrical patches of light with tails, which makes measurement very imprecise. Its magnitude is usually deduced from the optical sine theorem.
Astigmatism
The image of a point forms focal lines at the sagittal and tangental foci and in between (in the absence of coma) an elliptical shape.
Curvature of Field
The Petzval field curvature means that the image instead of lying in a plane actually lies on a curved surface which is described as hollow or round. This causes problems when a flat imaging device is used e.g. a photographic plate or CCD image sensor.
Distortion
Either barrel or pincushion, a radial distortion which must be corrected for if multiple images are to be combined (similar to stitching multiple photos into a panoramic photo).

They are always listed in the above order since this expresses their interdependence as first order aberrations via moves of the exit/entrance pupils. The first Seidel aberration, Spherical Aberration, is independent of the position of the exit pupil (as it is the same for axial and extra-axial pencils). The second, coma, changes as a function of pupil distance and spherical aberration, hence the well-known result that it is impossible to correct the coma in a lens free of spherical aberration by simply moving the pupil. Similar dependencies affect the remaining aberrations in the list.

### The chromatic aberrations

Longitudinal chromatic aberration: As with spherical aberration this is the same for axial and oblique pencils.
Transverse chromatic aberration (chromatic aberration of magnification)

## Astronomical research telescopes

Two of the four Unit Telescopes that make up the ESO's VLT, on a remote mountaintop, 2600 metres above sea level in the Chilean Atacama Desert.

Optical telescopes have been used in astronomical research since the time of their invention in the early 17th century. Many types have be constructed over the years depending on the optical technology, such as refracting and reflecting, the nature of the light or object being imaged, and even where they are placed, such as space telescopes. Some are classified by the task they perform such as Solar telescopes,

### Large reflectors

Nearly all large research-grade astronomical telescopes are reflectors. Some reasons are:

• In a lens the entire volume of material has to be free of imperfection and inhomogeneities, whereas in a mirror, only one surface has to be perfectly polished.
• Light of different colors travels through a medium other than vacuum at different speeds. This causes chromatic aberration.
• Reflectors work in a wider spectrum of light since certain wavelengths are absorbed when passing through glass elements like those found in a refractor or catadioptric.
• There are technical difficulties involved in manufacturing and manipulating large-aperture lenses. One of them is that all real materials sag in gravity. A lens can only be held by its perimeter. A mirror, on the other hand, can be supported by the whole side opposite to its reflecting face.

Most large research telescopes can operate as either a Cassegrain telescope (longer focal length, and a narrower field with higher magnification) or a Newtonian telescope (brighter field). They have a pierced primary mirror, a Newtonian focus, and a spider to mount a variety of replaceable secondary mirrors.

Harlan J. Smith Telescope reflecting telescope at McDonald Observatory, Texas

A new era of telescope making was inaugurated by the Multiple Mirror Telescope (MMT), with a mirror composed of six segments synthesizing a mirror of 4.5 meters diameter. This has now been replaced by a single 6.5 m mirror. Its example was followed by the Keck telescopes with 10 m segmented mirrors.

The largest current ground-based telescopes have a primary mirror of between 6 and 11 meters in diameter. In this generation of telescopes, the mirror is usually very thin, and is kept in an optimal shape by an array of actuators (see active optics). This technology has driven new designs for future telescopes with diameters of 30, 50 and even 100 meters.

Relatively cheap, mass-produced ~2 meter telescopes have recently been developed and have made a significant impact on astronomy research. These allow many astronomical targets to be monitored continuously, and for large areas of sky to be surveyed. Many are robotic telescopes, computer controlled over the internet (see e.g. the Liverpool Telescope and the Faulkes Telescope North and South), allowing automated follow-up of astronomical events.

Initially the detector used in telescopes was the human eye. Later, the sensitized photographic plate took its place, and the spectrograph was introduced, allowing the gathering of spectral information. After the photographic plate, successive generations of electronic detectors, such as the charge-coupled device (CCDs), have been perfected, each with more sensitivity and resolution, and often with a wider wavelength coverage.

Current research telescopes have several instruments to choose from such as:

• imagers, of different spectral responses
• spectrographs, useful in different regions of the spectrum
• polarimeters, that detect light polarization.

The phenomenon of optical diffraction sets a limit to the resolution and image quality that a telescope can achieve, which is the effective area of the Airy disc, which limits how close two such discs can be placed. This absolute limit is called the diffraction limit (and may be approximated by the Rayleigh criterion, Dawes limit or Sparrow's resolution limit). This limit depends on the wavelength of the studied light (so that the limit for red light comes much earlier than the limit for blue light) and on the diameter of the telescope mirror. This means that a telescope with a certain mirror diameter can theoretically resolve up to a certain limit at a certain wavelength. For conventional telescopes on Earth, the diffraction limit is not relevant for telescopes bigger than about 10 cm. Instead, the seeing, or blur caused by the atmosphere, sets the resolution limit. But in space, or if adaptive optics are used, then reaching the diffraction limit is sometimes possible. At this point, if greater resolution is needed at that wavelength, a wider mirror has to be built or aperture synthesis performed using an array of nearby telescopes.

In recent years, a number of technologies to overcome the distortions caused by atmosphere on ground-based telescopes have been developed, with good results. See adaptive optics, speckle imaging and optical interferometry.

## Famous optical telescopes

The Hubble Space Telescope orbits above Earth.
• The Hubble Space Telescope is in orbit beyond Earth's atmosphere to allow for observations not distorted by atmospheric seeing. In this way the images can be diffraction limited, and used for coverage in the ultraviolet (UV) and infrared. Also there is no background from light scattered by the air so very deep images are possible, despite the relatively small mirror size.
• The Keck telescopes are no longer the largest, and were superseded by the Gran Telescopio Canarias.
• The Hobby-Eberly Telescope and Southern African Large Telescope are large 9.2 meter telescopes of a very different design. The mirror is held stationary and objects tracked by moving the instruments. This has significant operational restrictions, but gives a large aperture for a fraction of the cost of a fully steerable telescope.
• The Very Large Telescope array (VLT) at Paranal Observatory is currently (as of 2002) the record holder for total collecting area in an array of telescopes, with four telescopes each 8 meters in diameter. The four telescopes, belonging to the European Southern Observatory (ESO) and located in the Atacama desert in Chile, are usually operated independently for faint astronomical observations, but up to three telescopes can be operated together for aperture synthesis observations of bright objects.
• The Navy Prototype Optical Interferometer is the optical telescope (array) that can currently (as of 2005) produce the highest resolution images at visible wavelengths.
• The CHARA (Center for High Angular Resolution Astronomy) array is the telescope array that can currently (as of 2005) produce the highest resolution images at near-infrared wavelengths.
• There are many plans for even larger telescopes. One of them is the Overwhelmingly Large Telescope (OWL), which is intended to have a single aperture of 100 meters in diameter.
• The 200-inch (5.08 m) Hale telescope on Palomar Mountain was the largest conventional research telescope for many years. It has a single borosilicate (Pyrex) mirror that was famously difficult to construct. The mounting is a special design of equatorial mount called a yoke mount, which permits the telescope to be pointed at and near the north celestial pole.
• The 100-inch (2.54 m) Hooker Telescope at the Mount Wilson Observatory was used by Edwin Hubble to discover galaxies and the redshift. The mirror was made of green glass by Saint-Gobain. In 1919, the telescope was used for the first stellar diameter measurements using interferometry. The telescope now has an adaptive optics system, and is still useful for advanced research.
• The 72-inch Leviathan at Birr Castle (in Ireland) was the largest telescope in the world from 1845 until it was dismantled in 1908. It was not exceeded in size until the construction of the Hooker Telescope.
• The 1.02-meter Yerkes Telescope (in Wisconsin) is the largest aimable refracting telescope in use.
• The Great Lick 36-inch (0.91 m) refractor built in 1889 at the Lick Observatory on Mt. Hamilton near San Jose, California.
• The 0.76-meter Nice refractor (in France) that became operational in 1888 was at that time the world's largest refractor. It was exceeded in size one year later; this was the last time the most powerful operational telescope in the world was located in Europe.
• The Great Paris Exhibition Telescope of 1900, the largest refractor ever constructed. It was on display at the 1900 Paris Exposition. Its lens was stationary, prefigured so as to sag into the correct shape. The telescope was aimed by the aid of a Foucault sidérostat, which is a movable plane mirror with a 2-meter diameter, mounted in a large cast-iron frame. The horizontal tube was 60 m long and the objective was 1.25 m in diameter. It was a never successful as a research telescope and was dismantled and scrapped after the Exhibition.
• The Gran Telescopio Canarias (Grantecan, also GTC), is a high performance segmented 10.4 meter telescope, located in one of the best sites of the Northern Hemisphere: the Roque de los Muchachos Observatory (La Palma, Canary Islands, Spain). After completion in 2009, it became the world's largest single-aperture optical telescope.
• The refracting Swedish 1-m Solar Telescope (SST) on La Palma (Spain), is currently the highest-resolution solar telescope in the world.
• The 26 inch refracting US Naval Observatory Telescope in Washington D.C. was used in the discovery of the two moons of Mars, Phobos and Deimos.

## Notes

1. ^ galileo.rice.edu The Galileo Project > Science > The Telescope by Al Van Helden – “the telescope was not the invention of scientists; rather, it was the product of craftsmen.”
2. ^ a b Fred Watson, Stargazer (page 55)
3. ^ The History of the Telescope By Henry C. King, Page 25-29
4. ^ progression is followed through Robert Grosseteste Witelo, Roger Bacon, through Johannes Kepler, D. C. Lindberg, Theories of Vision from al-Kindi to Kepler, (Chicago: Univ. of Chicago Pr., 1976), pp. 94-99
5. ^ galileo.rice.edu The Galileo Project > Science > The Telescope by Al Van Helden
6. ^ Renaissance Vision from Spectacles to Telescopes By Vincent Ilardi, page 210
7. ^ galileo.rice.edu The Galileo Project > Science > The Telescope by Al Van Helden
8. ^ The History of the Telescope By Henry C. King, Page 27 "(spectacles) invention, an important step in the history of the telescope"
9. ^ galileo.rice.edu The Galileo Project > Science > The Telescope by Al Van Helden "The Hague discussed the patent applications first of Hans Lipperhey of Middelburg, and then of Jacob Metius of Alkmaar... another citizen of Middelburg, Sacharias Janssen had a telescope at about the same time but was at the Frankfurt Fair where he tried to sell it"
10. ^ See his books Astronomiae Pars Optica and Dioptrice
11. ^ Sphaera - Peter Dollond answers Jesse Ramsden - A review of the events of the invention of the achromatic doublet with emphasis on the roles of Hall, Bass, John Dollond and others.
12. ^ Stargazer - By Fred Watson, Inc NetLibrary, Page 108
13. ^ Stargazer - By Fred Watson, Inc NetLibrary, Page 109
14. ^ works by Bonaventura Cavalieri and Marin Mersenne among others have designs for reflecting telescopes
15. ^ Stargazer - By Fred Watson, Inc NetLibrary, Page 117
16. ^ The History of the Telescope By Henry C. King, Page 71
17. ^ Isaac Newton: adventurer in thought, by Alfred Rupert Hall, page 67
18. ^ Parabolic mirrors were used much earlier, but James Short perfected their construction. See "Reflecting Telescopes (Newtonian Type)". Astronomy Department, University of Michigan.
19. ^ Silvering was introduced by Léon Foucault in 1857, see madehow.com - Inventor Biographies - Jean-Bernard-Léon Foucault Biography (1819-1868), and the adoption of long lasting aluminized coatings on reflector mirrors in 1932. Bakich sample pages Chapter 2, Page 3 "John Donavan Strong, a young physicist at the California Institute of Technology, was one of the first to coat a mirror with aluminum. He did it by thermal vacuum evaporation. The first mirror he aluminized, in 1932, is the earliest known example of a telescope mirror coated by this technique."

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• optical telescope — noun an astronomical telescope designed to collect and record light from cosmic sources • Hypernyms: ↑astronomical telescope • Hyponyms: ↑reflecting telescope, ↑reflector, ↑refracting telescope • Part Meronyms: ↑eyepiece …   Useful english dictionary

• Nordic Optical Telescope — The building of the Nordic Optical Telescope near the time of sunset. Organization NOT Council …   Wikipedia

• Infrared Optical Telescope Array — IOTA (acronyme signifiant Infrared and Optical Telescope Array) était un interféromètre optique à longue base initialement construit par un consortium constitué du Harvard College Observatory, du MIT Lincoln Laboratory, du Smithsonian… …   Wikipédia en Français

• Nordic Optical Telescope — Vue sur le dôme du télescope optique nordique, avec l océan Atlantique en arrière plan. Caractéristiques …   Wikipédia en Français

• Nordic Optical Telescope — Blick über das Nordic Optical Telescope Das Nordic Optical Telescope (NOT) ist ein auf dem Roque de los Muchachos Observatorium auf der Kanareninsel La Palma befindliches astronomisches Teleskop mit 2,56m Spiegeldurchmesser. Dänemark, Schweden,… …   Deutsch Wikipedia

• Infrared Optical Telescope Array — The Infrared Optical Telescope Array (IOTA) began with an agreement in 1988 among five Institutions, the Smithsonian Astrophysical Observatory, Harvard University, the University of Massachusetts, the University of Wyoming, and MIT/Lincoln… …   Wikipedia

• telescope — /tel euh skohp /, n., adj., v., telescoped, telescoping. n. 1. an optical instrument for making distant objects appear larger and therefore nearer. One of the two principal forms (refracting telescope) consists essentially of an objective lens… …   Universalium

• Telescope — A telescope is an instrument designed for the observation of remote objects and the collection of electromagnetic radiation. The first known practically functioning telescopes were invented in the Netherlands at the beginning of the 17th century …   Wikipedia

• Télescope optique nordique — Nordic Optical Telescope Nordic Optical Telescope Vue sur le dôme du télescope optique nordique, avec l océan Atlantique en arrière plan …   Wikipédia en Français

• Optical Mechanics, Inc. — Optical Mechanics, Inc. or OMI is a high end American telescope and optics instrument manufacturer. OMI was founded in 2002 and produces observatory telescopes, Lidar telescopes, optical tube assemblies, telescope mirrors and reflective coatings… …   Wikipedia

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.