 Characteristic function (probability theory)

In probability theory and statistics, the characteristic function of any random variable completely defines its probability distribution. Thus it provides the basis of an alternative route to analytical results compared with working directly with probability density functions or cumulative distribution functions. There are particularly simple results for the characteristic functions of distributions defined by the weighted sums of random variables.
In addition to univariate distributions, characteristic functions can be defined for vector or matrixvalued random variables, and can even be extended to more generic cases.
The characteristic function always exists when treated as a function of a realvalued argument, unlike the momentgenerating function. There are relations between the behavior of the characteristic function of a distribution and properties of the distribution, such as the existence of moments and the existence of a density function.
Contents
Introduction
The characteristic function provides an alternative way for describing a random variable. Similarly to the cumulative distribution function
 (where 1{X ≤ x} is the indicator function — it is equal to 1 when X ≤ x, and zero otherwise)
which completely determines behavior and properties of the probability distribution of the random variable X, the characteristic function
also completely determines behavior and properties of the probability distribution of the random variable X. The two approaches are equivalent in the sense that knowing one of the functions it is always possible to find the other, yet they both provide different insight for understanding the features of the random variable. However, in particular cases, there can be differences in whether these functions can be represented as expressions involving simple standard functions.
If a random variable admits a density function, then the characteristic function is its dual, in the sense that each of them is a Fourier transform of the other. If a random variable has a momentgenerating function, then the domain of the characteristic function can be extended to the complex plane, and
 ^{[1]}
Note however that the characteristic function of a distribution always exists, even when the probability density function or momentgenerating function do not.
The characteristic function approach is particularly useful in analysis of linear combinations of independent random variables. Another important application is to the theory of the decomposability of random variables.
Definition
For a scalar random variable X the characteristic function is defined as the expected value of e^{itX}, where i is the imaginary unit, and t ∈ R is the argument of the characteristic function:
Here F_{X} is the cumulative distribution function of X, and the integral is of the Riemann–Stieltjes kind. If random variable X has a probability density function ƒ_{X}, then the characteristic function is its Fourier transform,^{[2]} and the last formula in parentheses is valid.
It should be noted though, that this convention for the constants appearing in the definition of the characteristic function differs from the usual convention for the Fourier transform.^{[3]} For example some authors^{[4]} define φ_{X}(t) = Ee^{−2πitX}, which is essentially a change of parameter. Other notation may be encountered in the literature: as the characteristic function for a probability measure p, or as the characteristic function corresponding to a density ƒ.
The notion of characteristic functions generalizes to multivariate random variables and more complicated random elements. The argument of the characteristic function will always belong to the continuous dual of the space where random variable X takes values. For common cases such definitions are listed below:
 If X is a kdimensional random vector, then for t ∈ R^{k}
 If X is a k×pdimensional random matrix, then for t ∈ R^{k×p}
 If X is a complex random variable, then for t ∈ C ^{[5]}
 If X is a kdimensional complex random vector, then for t ∈ C^{k} ^{[6]}
 If X(s) is a stochastic process, then for all functions t(s) such that the integral ∫_{R}t(s)X(s)ds converges for almost all realizations of X ^{[7]}
Here ^{T} denotes matrix transpose, tr(·) — the matrix trace operator, Re(·) is the real part of a complex number, z denotes complex conjugate, and * is conjugate transpose (that is z* = z^{T} ).
Examples
Distribution Characteristic function φ(t) Degenerate δ_{a} Bernoulli Bern(p) Binomial B(n, p) Negative binomial NB(r, p) Poisson Pois(λ) Uniform U(a, b) Laplace L(μ, b) Normal N(μ, σ^{2}) Chisquare χ^{2}_{k} Cauchy Cauchy(μ, θ) Gamma Γ(k, θ) Exponential Exp(λ) Multivariate normal N(μ, Σ) Oberhettinger (1973) provides extensive tables of characteristic functions.
Properties
 The characteristic function of a random variable always exists, since it is an integral of a bounded continuous function over a space whose measure is finite.
 A characteristic function is uniformly continuous on the entire space
 It is nonvanishing in a region around zero: φ(0) = 1.
 It is bounded:  φ(t)  ≤ 1.
 It is Hermitian: φ(−t) = φ(t). In particular, the characteristic function of a symmetric (around the origin) random variable is realvalued and even.
 There is a bijection between distribution functions and characteristic functions. That is, for any two random variables X_{1}, X_{2}
 If a random variable X has moments up to kth order, then the characteristic function φ_{X} is k times continuously differentiable on the entire real line. In this case
 If a characteristic function φ_{X} has a kth derivative at zero, then the random variable X has all moments up to k if k is even, but only up to k – 1 if k is odd.^{[8]}
 If X_{1}, …, X_{n} are independent random variables, and a_{1}, …, a_{n} are some constants, then the characteristic function of the linear combination of X_{i}'s is
One specific case would be the sum of two independent random variables X_{1} and X_{2} in which case one would have .
 The tail behavior of the characteristic function determines the smoothness of the corresponding density function.
Continuity
The bijection stated above between probability distributions and characteristic functions is continuous. That is, whenever a sequence of distribution functions { F_{j}(x) } converges (weakly) to some distribution F(x), the corresponding sequence of characteristic functions { φ_{j}(t) } will also converge, and the limit φ(t) will correspond to the characteristic function of law F. More formally, this is stated as
 Lévy’s continuity theorem: A sequence { X_{j} } of nvariate random variables converges in distribution to random variable X if and only if the sequence { φ_{Xj} } converges pointwise to a function φ which is continuous at the origin. Then φ is the characteristic function of X.^{[9]}
This theorem is frequently used to prove the law of large numbers, and the central limit theorem.
Inversion formulas
Since there is a onetoone correspondence between cumulative distribution functions and characteristic functions, it is always possible to find one of these functions if we know the other one. The formula in definition of characteristic function allows us to compute φ when we know the distribution function F (or density ƒ). If, on the other hand, we know the characteristic function φ and want to find the corresponding distribution function, then one of the following inversion theorems can be used.
Theorem. If characteristic function φ_{X} is integrable, then F_{X} is absolutely continuous, and therefore X has the probability density function given by
 when X is scalar;
in multivariate case the pdf is understood as the Radon–Nikodym derivative of the distribution μ_{X} with respect to the Lebesgue measure λ:
Theorem (Lévy).^{[10]} If φ_{X} is characteristic function of distribution function F_{X}, two points a<b are such that {xa < x < b} is a continuity set of μ_{X} (in the univariate case this condition is equivalent to continuity of F_{X} at points a and b), then
 if X is scalar
 , if X is a vector random variable.
Theorem. If a is (possibly) an atom of X (in the univariate case this means a point of discontinuity of F_{X}) then
 , when X is a scalar random variable
 , when X is a vector random variable.
Theorem (GilPelaez).^{[11]} For a univariate random variable X, if x is a continuity point of F_{X} then
Inversion formula for multivariate distributions are available.^{[12]}
Criteria for characteristic functions
It is wellknown that any nondecreasing càdlàg function F with limits F(−∞) = 0, F(+∞) = 1 corresponds to a cumulative distribution function of some random variable.
There is also interest in finding similar simple criteria for when a given function φ could be the characteristic function of some random variable. The central result here is Bochner’s theorem, although its usefulness is limited because the main condition of the theorem, nonnegative definiteness, is very hard to verify. Other theorems also exist, such as Khinchine’s, Mathias’s, or Cramér’s, although their application is just as difficult. Pólya’s theorem, on the other hand, provides a very simple convexity condition which is sufficient but not necessary. Characteristic functions which satisfy this condition are called Pólyatype.^{[13]}
 Bochner’s theorem. An arbitrary function is the characteristic function of some random variable if and only if φ is positive definite, continuous at the origin, and if φ(0) = 1.
 Khinchine’s criterion. An absolutely continuous complexvalued function φ equal to 1 at the origin is a characteristic function if and only if it admits the representation
 Mathias’ theorem. A real, even, continuous, absolutely integrable function φ equal to 1 at the origin is a characteristic function if and only if

Pólya’s theorem. If φ is a realvalued continuous function which satisfies the conditions
then φ(t) is the characteristic function of an absolutely continuous symmetric distribution.
 A convex linear combination (with ) of a finite or a countable number of characteristic functions is also a characteristic function.
 The product of a finite number of characteristic functions is also a characteristic function. The same holds for an infinite product provided that it converges to a function continuous at the origin.
 If φ is a characteristic function and α is a real number, then φ, Re[φ], φ^{2}, and φ(αt) are also characteristic functions.
Uses
Because of the continuity theorem, characteristic functions are used in the most frequently seen proof of the central limit theorem. The main trick involved in making calculations with a characteristic function is recognizing the function as the characteristic function of a particular distribution.
Basic manipulations of distributions
Characteristic functions are particularly useful for dealing with linear functions of independent random variables. For example, if X_{1}, X_{2}, ..., X_{n} is a sequence of independent (and not necessarily identically distributed) random variables, and
where the a_{i} are constants, then the characteristic function for S_{n} is given by
In particular, φ_{X+Y}(t) = φ_{X}(t)φ_{Y}(t). To see this, write out the definition of characteristic function:
Observe that the independence of X and Y is required to establish the equality of the third and fourth expressions.
Another special case of interest is when a_{i} = 1/n and then S_{n} is the sample mean. In this case, writing X for the mean,
Moments
Characteristic functions can also be used to find moments of a random variable. Provided that the n^{th} moment exists, characteristic function can be differentiated n times and
For example, suppose X has a standard Cauchy distribution. Then φ_{X}(t) = e^{−t}. See how this is not differentiable at t = 0, showing that the Cauchy distribution has no expectation. Also see that the characteristic function of the sample mean X of n independent observations has characteristic function φ_{X}(t) = (e^{−t/n})^{n} = e^{−t}, using the result from the previous section. This is the characteristic function of the standard Cauchy distribution: thus, the sample mean has the same distribution as the population itself.
The logarithm of a characteristic function is a cumulant generating function, which is useful for finding cumulants; note that some instead define the cumulant generating function as the logarithm of the momentgenerating function, and call the logarithm of the characteristic function the second cumulant generating function.
Data analysis
Characteristic functions can be used as part of procedures for fitting probability distributions to samples of data. Cases where this provides a practicable option compared to other possibilities include fitting the stable distribution since closed form expressions for the density are not available which makes implementation of maximum likelihood estimation difficult. Estimation procedures are available which match the theoretical characteristic function to the empirical characteristic function, calculated from the data. Paulson et al. (1975) and Heathcote (1977) provide some theoretical background for such an estimation procedure. In addition, Yu (2004) describes applications of empirical characteristic functions to fit time series models where likelihood procedures are impractical.
Example
The Gamma distribution with scale parameter θ and a shape parameter k has the characteristic function
Now suppose that we have
with X and Y independent from each other, and we wish to know what the distribution of X + Y is. The characteristic functions are
which by independence and the basic properties of characteristic function leads to
This is the characteristic function of the gamma distribution scale parameter θ and shape parameter k_{1} + k_{2}, and we therefore conclude
The result can be expanded to n independent gamma distributed random variables with the same scale parameter and we get
Entire characteristic functions
As defined above, the argument of the characteristic function is treated as a real number: however, certain aspects of the theory of characteristic functions are advanced by extending the definition into the complex plane by analytical continuation, in cases where this is possible.^{[14]}
Related concepts
Related concepts include the momentgenerating function and the probabilitygenerating function. The characteristic function exists for all probability distributions. However this is not the case for moment generating function.
The characteristic function is closely related to the Fourier transform: the characteristic function of a probability density function p(x) is the complex conjugate of the continuous Fourier transform of p(x) (according to the usual convention; see continuous Fourier transform – other conventions).
where P(t) denotes the continuous Fourier transform of the probability density function p(x). Likewise, p(x) may be recovered from φ_{X}(t) through the inverse Fourier transform:
Indeed, even when the random variable does not have a density, the characteristic function may be seen as the Fourier transform of the measure corresponding to the random variable.
See also
 Subindependence, a weaker condition than independence, that is defined in terms of characteristic functions.
Notes
 ^ Lukacs (1970) p. 196
 ^ Billingsley (1995)
 ^ Pinsky (2002)
 ^ Bochner (1955)
 ^ Andersen et al. (1995, Definition 1.10)
 ^ Andersen et al. (1995, Definition 1.20)
 ^ Sobczyk (2001)
 ^ Lukacs (1970), Corollary 1 to Theorem 2.3.1
 ^ Cuppens (1975, Theorem 2.6.9)
 ^ Named after the French mathematician Paul Pierre Lévy
 ^ Wendel, J.G. (1961)
 ^ Shephard (1991a,b)
 ^ Lukacs (1970), p.84
 ^ Lukacs (1970, Chapter 7)
References
 Andersen, H.H., M. Højbjerre, D. Sørensen, P.S. Eriksen (1995). Linear and graphical models for the multivariate complex normal distribution. Lecture notes in statistics 101. New York: SpringerVerlag. ISBN 0387945210.
 Billingsley, Patrick (1995). Probability and measure (3rd ed.). John Wiley & Sons. ISBN 0471007102.
 Bisgaard, T. M.; Z. Sasvári (2000). Characteristic functions and moment sequences. Nova Science.
 Bochner, Salomon (1955). Harmonic analysis and the theory of probability. University of California Press.
 Cuppens, R. (1975). Decomposition of multivariate probabilities. Academic Press.
 Heathcote, C.R. (1977). "The integrated squared error estimation of parameters". Biometrika 64 (2): 255–264. doi:10.1093/biomet/64.2.255.
 Lukacs, E. (1970). Characteristic functions. London: Griffin.
 Oberhettinger, Fritz (1973). Fourier Transforms of Distributions and their Inverses: A Collection of Tables. Aciademic Press
 Paulson, A.S.; E.W. Holcomb, R.A. Leitch (1975). "The estimation of the parameters of the stable laws". Biometrika 62 (1): 163–170. doi:10.1093/biomet/62.1.163.
 Pinsky, Mark (2002). Introduction to Fourier analysis and wavelets. Brooks/Cole. ISBN 0534376606.
 Sobczyk, Kazimierz (2001). Stochastic differential equations. Kluwer Academic Publishers. ISBN 9781402003455.
 Wendel, J.G. (1961). "The nonabsolute convergence of GilPelaez' inversion integral". The Annals of Mathematical Statistics 32 (1): 338–339. doi:10.1214/aoms/1177705164.
 Yu, J. (2004). "Empirical characteristic function estimation and its applications". Econometrics Reviews 23 (2): 93–1223. doi:10.1081/ETC120039605.
 Shephard, N. G. (1991a) From characteristic function to distribution function: A simple framework for the theory. Econometric Theory, 7, 519–529.
 Shephard, N. G. (1991b) Numerical integration rules for multivariate inversions. J. Statist. Comput. Simul., 39, 37–46.
Theory of probability distributions probability mass function (pmf) · probability density function (pdf) · cumulative distribution function (cdf) · quantile functionmomentgenerating function (mgf) · characteristic function · probabilitygenerating function (pgf) · cumulantCategories: Probability theory
 Theory of probability distributions
Wikimedia Foundation. 2010.
Look at other dictionaries:
Characteristic function — In mathematics, characteristic function can refer to any of several distinct concepts: The most common and universal usage is as a synonym for indicator function, that is the function which for every subset A of X, has value 1 at points of A and… … Wikipedia
Smoothness (probability theory) — In probability theory and statistics, smoothness of a density function is a measure which determines how many times the density function can be differentiated, or equivalently the limiting behavior of distribution’s characteristic function.… … Wikipedia
Independence (probability theory) — In probability theory, to say that two events are independent intuitively means that the occurrence of one event makes it neither more nor less probable that the other occurs. For example: The event of getting a 6 the first time a die is rolled… … Wikipedia
Probability density function — Boxplot and probability density function of a normal distribution N(0, σ2). In probability theory, a probability density function (pdf), or density of a continuous random variable is a function that describes the relative likelihood for this… … Wikipedia
Probability distribution — This article is about probability distribution. For generalized functions in mathematical analysis, see Distribution (mathematics). For other uses, see Distribution (disambiguation). In probability theory, a probability mass, probability density … Wikipedia
Probability — is the likelihood or chance that something is the case or will happen. Probability theory is used extensively in areas such as statistics, mathematics, science and philosophy to draw conclusions about the likelihood of potential events and the… … Wikipedia
probability and statistics — ▪ mathematics Introduction the branches of mathematics concerned with the laws governing random events, including the collection, analysis, interpretation, and display of numerical data. Probability has its origin in the study of gambling… … Universalium
Probabilitygenerating function — In probability theory, the probability generating function of a discrete random variable is a power series representation (the generating function) of the probability mass function of the random variable. Probability generating functions are… … Wikipedia
Characteristic state function — The characteristic state function in statistical mechanics refers to a particular relationship between the partition function of an ensemble. In particular, if the partition function P satisfies P = exp( − βQ) or P = exp( + βQ) in which Q is a… … Wikipedia
Theory of the firm — The theory of the firm consists of a number of economic theories that describe the nature of the firm, company, or corporation, including its existence, behavior, structure, and relationship to the market.[1] Contents 1 Overview 2 Background … Wikipedia