Standard state

Standard state

In chemistry, the standard state of a material is its state at 1 bar (100 kilopascals exactly). This pressure was changed from 1 atm (101.325 kilopascals) by IUPAC in 1990. [GoldBookRef | file = S05910 | title = standard conditions for gases] The standard state of a material can be defined at any given temperature, most commonly 25 degrees Celsius, although quite a few texts (especially in related disciplines such as physics and engineering) use 0 degrees Celsius for Standard Temperature and Pressure (STP). The standard state is an "arbitrarily chosen non-zero value", not a natural zero point.

For a given material or substance, the standard state is the reference state for the material's thermodynamic state properties such as enthalpy, entropy, Gibbs free energy, and for many other material standards. The standard enthalpy of formation for an element in its standard state is 0.

When the standard state is referred to a solute in a solution, or to a chemical reaction, it also includes the condition that the concentrations of all solutes are at unity (or another designated quantity) for whatever measure of concentration is specified. If that is molarity that would be 1 mol·dm-3 and for molality 1 mol·kg-1 assuming the solution infinite-dilution behaviour. If mole fraction is used, the pure liquid or solid is the standard state ("x"=1). As it is possible (and in principle legitimate) to take a different unit for each of the species in the reaction, the nature of the standard state needs to be "specified" when reporting or tabulating. Although a definition involving 1 mol/L (molarity at unity) of A in combination with pure B (mole fraction at unity) is clearly a condition that can never be met, such a non-existent standard state nevertheless leads to a consistent system of tabulated values, provided it is used consistently by all. Of course these values are "different" from those where a different standard state is adopted.

Implied in the above is the important but often overlooked concept that many standard states are non-physical states, often referred to as "hypothetical states". Nevertheless, their thermodynamic properties are well-defined, usually by an extrapolation from some limiting condition, such as zero pressure or zero concentration, to a specified condition (usually unit concentration or pressure) using an ideal extrapolating function, such as ideal solution or ideal gas behavior. Thus, the standard state of a gas is usually defined as the hypothetical ideal gas at 1 bar pressure.

The thermodynamic properties of a gas in such a standard are in general not the same as those of a real gas at the same pressure (typically 1 bar pressure by convention), owing to the fact that real gases are non-ideal. Similarly, the thermodynamic properties of a solution in a 1 molar standard state are not the same as thermodynamic properties of real solution at 1 molar concentration.

The usual choice of standard state for a pure solid is the solid with unit total pressure applied to the substance (typically 1 bar) with the further stipulation that the substance be in its most stable form at that pressure. Pure liquids are treated the same way.

ymbol

In the time of their development (the 19th century) the Plimsoll - symbol was adopted as a superscript o to indicate the non-zero nature of the chosen reference state. For typographic reasons this symbol is often abridged to a rather misleading zero superscript 0 in later texts.

At elevated temperature and pressure

In chemistry of solutions at elevated temperatures and pressures, the term "standard state" often denotes the hypothetical standard concentration, typically:
* 1 mol/kg for solutes assuming an ideal behaviour (i.e., an infinite dilution),
* a unity molar fraction (for pure substances),
* a partial pressure of 100 kPa for gaseous reagents.

It does not imply any particular temperature or total system pressure because, although contrary to IUPAC recommendation, it is more convenient when describing solutions over a wide temperature and pressure ranges. [V. Majer, J. Sedelbauer and Wood, "Calculations of standard thermodynamic properties of aqueous electrolytes and nonelectrolytes." Chapter 4 in: "Aqueous Systems at Elevated Temperatures and Pressures. Physical Chemistry of Water, Steam and Hydrothermal Solutions", D.A.Palmer, R. Fernandez-Prini, and A.Harvey (editors), Elsevier, 2004.]

ee also

* Standard conditions for temperature and pressure

Notes

External links

*


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • standard state — norminė būsena statusas T sritis Standartizacija ir metrologija apibrėžtis Sistemos būsena, atitinkanti normatyviniame dokumente arba standarte nurodytas normines parametrų vertes, pvz., 293,15 K temperatūrą ir 101,325 kPa slėgį. atitikmenys:… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • standard state — normalioji būsena statusas T sritis fizika atitikmenys: angl. normal state; standard state vok. Normalzustand, m; Normzustand, m rus. нормальное состояние, n pranc. état normal, m; état standard, m; état type, m …   Fizikos terminų žodynas

  • standard state — normalioji būsena statusas T sritis automatika atitikmenys: angl. normal state; standard state vok. Normalzustand, m rus. нормальное состояние, n pranc. état normal, m …   Automatikos terminų žodynas

  • standard state — standartinė būsena statusas T sritis chemija apibrėžtis Termodinaminės sistemos, parinktos atskaitos tašku termodinaminių parametrų įvertinimui, būsena. atitikmenys: angl. ground state; standard state rus. стандартное состояние …   Chemijos terminų aiškinamasis žodynas

  • The Standard State Zoning Enabling Act — was written by a New York City commission headed by Edward Bassett and signed by Mayor John Purroy Mitchel in 1916 to regulate buildings and land usage in New York City. It was bought forth as part of the reaction to the construction of the… …   Wikipedia

  • Federal Information Processing Standard state code — FIPS state codes are two digit numeric codes and two letter alphabetic codes that represent the 50 states, the District of Columbia and the outlying areas of the United States, and associated areas. The codes are defined in U.S. Federal… …   Wikipedia

  • Standard cubic feet per minute — (SCFM) is the volumetric flow rate of a gas corrected to standardized conditions of temperature and pressure. It is equivalent to the molar flow rate by the ideal gas law. Conversion of SCFM to mass flow requires knowledge of the mixture averaged …   Wikipedia

  • Standard conditions for temperature and pressure — Not to be confused with Standard state. In chemistry, standard condition for temperature and pressure (informally abbreviated as STP) are standard sets of conditions for experimental measurements, to allow comparisons to be made between different …   Wikipedia

  • Standard enthalpy change of formation — The standard enthalpy of formation or standard heat of formation of a compound is the change of enthalpy that accompanies the formation of 1 mole of a substance in its standard state from its constituent elements in their standard states (the… …   Wikipedia

  • Standard molar entropy — In chemistry, the standard molar entropy is the entropy content of one mole of substance, under standard conditions (not standard temperature and pressure STP).The standard molar entropy is usually given the symbol S o, and the units joules per… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”