- World Geodetic System
The World Geodetic System defines a reference frame for the earth, for use in
geodesyand navigation. The latest revision is WGS 84 dating from 1984 (last revised in 2004), which will be valid up to about 2010.
Earlier schemes included WGS 72, WGS 66, and WGS 60.
Efforts to supplement the various national
surveyingsystems began in the 19th century with F.R. Helmert's famous books _de. "Mathematische und Physikalische Theorien der Physikalischen Geodäsie" ("Mathematical and Physical Theory of Physical Geodesy"). Austriaand Germanyinitiated the foundation of a Central Bureau of "Internationale Erdmessung", and a series of global ellipsoids of the Earth were derived (e.g. Helmert 1906, Hayford1910/ 1924).
A unified World Geodetic System became essential in the
1950s for several reasons:
space scienceand the beginning of astronautics.
* The lack of inter-continental geodetic information.
* The inability of the large
geodetic systems, such as European Datum ( ED50), North American Datum(NAD), and Tokyo Datum(TD), to provide a worldwide geo-data basis
* Need for
globalmaps for navigation, aviation, and geography.
Cold War preparednessnecessitated a standardised, NATO-wide geospatial reference system, in accordance with the NATO Standardisation Agreement
In the late 1950s, the United States DoD, together with
scientists of other institutions and countries, began to develop the needed world system to which geodetic datums could be referred and compatibility established between the coordinates of widely separated sites of interest. Efforts of the U.S. Army, Navy and Air Force were combined leading to the DoD World Geodetic System 1960 (WGS 60). The term "datum" as used here refers to a smooth surface somewhat arbitrarily defined as "zero elevation," consistent with a set of surveyor's measures of distances between various stations, and differences in elevation, all reduced to a grid of latitudes, longitudes, and elevations. Heritage surveying methods found elevation differences off a local horizontal determined by the spirit level, plumb line, or an equivalent device that depends on the local gravity field (see physical geodesy). As a result, the elevations in the datums are referenced to the geoid, a surface that is not readily found using satellite geodesy. The latter observational method is more suitable for global mapping. Therefore, a motivation, and a substantial problem in the WGS and similar work is to patch together datums that were not only made separately, for different regions, but to re-reference the elevations to an ellipsoid model rather than to the geoid.
In accomplishing WGS 60, a combination of available surface
gravitydata, astro-geodeticdata and results from HIRANand Canadian SHORAN surveys were used to define a best-fitting ellipsoidand an earth-centered orientation for each of the initially selected datums (Chapter IV). (The datums are relatively oriented with respect to different portions of the geoid by the astro-geodetic methods already described.) The sole contribution of satellitedata to the development of WGS 60 was a value for the ellipsoidflattening which was obtained from the nodal motion of a satellite.
Prior to WGS 60, the U.S. Army and
U.S. Air Forcehad each developed a world system by using different approaches to the gravimetric datum orientation method. To determine their gravimetric orientation parameters, the Air Force used the mean of the differences between the gravimetric and astro-geodetic deflections and geoid heights (undulations) at specifically selected stations in the areas of the major datums. The Army performed an adjustment to minimize the difference between astro-geodetic and gravimetric geoids. By matching the relative astro-geodetic geoids of the selected datums with an earth-centered gravimetric geoid, the selected datums were reduced to an earth-centered orientation. Since the Army and Air Force systems agreed remarkably well for the NAD, ED and TD areas, they were consolidated and became WGS 60.
The United States Department of Defense World Geodetic System 1966
Steps to the improvement of a global system were the Astrogeoid of
Irene Fischerand the astronautic Mercury datum. In January 1966, a World Geodetic System Committee composed of representatives from the United States Army, Navy and Air Force, was charged with the responsibility of developing an improved WGS needed to satisfy mapping, charting and geodetic requirements. Additional surface gravity observations, results from the extension of triangulationand trilaterationnetworks, and large amounts of Dopplerand opticalsatellite data had become available since the development of WGS 60. Using the additional data and improved techniques, WGS 66 was produced which served DoD needs for about five years after its implementation in 1967. The defining parameters of the WGS 66 Ellipsoid were the flattening (1/298.25), determined from satellite data and the semimajor axis (6,378,145 meters), determined from a combination of Doppler satellite and astro-geodetic data. A worldwide 5° × 5° mean free air gravity anomalyfield provided the basic data for producing the WGS 66 gravimetric geoid. Also, a geoid referenced to the WGS 66 Ellipsoid was derived from available astrogeodetic data to provide a detailed representation of limited land areas.
The United States Department of Defense World Geodetic System 1972
After an extensive effort extending over a period of approximately three years, the Department of Defense World Geodetic System 1972 was completed. Selected satellite, surface gravity and astrogeodetic data available through 1972 from both DoD and non-DoD sources were used in a Unified WGS Solution (a large scale
least squaresadjustment). The results of the adjustment consisted of corrections to initial station coordinates and coefficients of the gravitational field.
The largest collection of data ever used for WGS purposes was assembled, processed and applied in the development of WGS 72. Both optical and electronic satellite data were used. The electronic satellite data consisted, in part, of Doppler data provided by the U.S. Navy and cooperating non-DoD satellite tracking stations established in support of the Navy's Navigational Satellite System (NNSS). Doppler data was also available from the numerous sites established by GEOCEIVERS during 1971 and 1972. Doppler data was the primary data source for WGS 72 (Figure 38). Additional electronic satellite data was provided by the SECOR (Sequential Collation of Range) Equatorial Network completed by the U.S. Army in 1970. Optical satellite data from the Worldwide Geometric Satellite Triangulation Program was provided by the BC-4 camera system (Figure 39). Data from the Smithsonian Astrophysical Observatory was also used which included camera (Baker Nunn) and some laser ranging.
The surface gravity field used in the Unified WGS Solution consisted of a set of 410 10° × 10° equal area mean free air gravity anomalies determined solely from terrestrial data. This gravity field includes mean anomaly values compiled directly from observed gravity data wherever the latter was available in sufficient quantity. The value for areas of sparse or no observational data were developed from geophysically compatible gravity approximations using gravity-geophysical correlation techniques. Approximately 45 percent of the 410 mean free air gravity anomaly values were determined directly from observed gravity data.
The astrogeodetic data in its basic form consists of deflection of the vertical components referred to the various national geodetic datums. These deflection values were integrated into astrogeodetic geoid charts referred to these national datums. The geoid heights contributed to the Unified WGS Solution by providing additional and more detailed data for land areas. Conventional ground survey data was included in the solution to enforce a consistent adjustment of the coordinates of neighboring observation sites of the BC-4, SECOR, Doppler and Baker-Nunn systems. Also, eight geodimeter long line precise traverses were included for the purpose of controlling the scale of the solution.
The Unified WGS Solution, as stated above, was a solution for geodetic positions and associated parameters of the gravitational field based on an optimum combination of available data. The WGS 72 ellipsoid parameters, datum shifts and other associated constants were derived separately. For the unified solution, a normal equation matrix was formed based on each of the mentioned data sets. Then, the individual normal equation matrices were combined and the resultant matrix solved to obtain the positions and the parameters.
The value for the semimajor axis (a) of the WGS 72 Ellipsoid is 6 378 135 meters. The adoption of an a-value 10 meters smaller than that for the WGS 66 Ellipsoid was based on several calculations and indicators including a combination of satellite and surface gravity data for position and gravitational field determinations. Sets of satellite derived station coordinates and gravimetric deflection of the vertical and geoid height data were used to determine local-to-geocentric datum shifts, datum rotation parameters, a datum scale parameter and a value for the semimajor axis of the WGS Ellipsoid. Eight solutions were made with the various sets of input data, both from an investigative point of view and also because of the limited number of unknowns which could be solved for in any individual solution due to computer limitations. Selected Doppler satellite tracking and astro-geodetic datum orientation stations were included in the various solutions. Based on these results and other related studies accomplished by the Committee, an a-value of 6 378 135 meters and a flattening of 1/298.26 were adopted.
In the development of local-to WGS 72 datum shifts, results from different geodetic disciplines were investigated, analyzed and compared. Those shifts adopted were based primarily on a large number of Doppler TRANET and GEOCEIVER station coordinates which were available worldwide. These coordinates had been determined using the Doppler point positioning method.
A new World Geodetic System: WGS 84
In the early 1980s the need for a new world geodetic system was generally recognized by the geodetic community, also within the US Department of Defense. WGS 72 no longer provided sufficient data, information, geographic coverage, or product accuracy for all then current and anticipated applications. The means for producing a new WGS were available in the form of improved data, increased data coverage, new data types and improved techniques.
GRS 80parameters together with available Doppler, satellite laser ranging and Very Long Baseline Interferometry ( VLBI) observations constituted significant new information. An outstanding new source of data had become available from satellite radar altimetry. Also available was an advanced least squares method called collocation which allowed for a consistent combination solution from different types of measurements all relative to the Earth's gravity field, i.e. geoid, gravity anomalies, deflections, dynamic Doppler, etc.
The new World Geodetic System was called WGS 84. It is currently the reference system being used by the
Global Positioning System. It is geocentric and globally consistent within ±1 m. Current geodetic realizations of the geocentric reference system family International Terrestrial Reference System(ITRS) maintained by the IERSare geocentric, and internally consistent, at the few-cm level, while still being metre-level consistent with WGS 84.
The WGS 84 originally used the GRS 80
reference ellipsoid, but has undergone some minor refinements in later editions since its initial publication. Most of these refinements are important for high-precision orbital calculations for satellites but have little practical effect on typical topographical uses. The following table lists the primary ellipsoid parameters.
"The very small difference in the flattening thus results in a — very theoretical — difference of 105 µm in the semi polar axis.
For most purposes, the differing polar axes can be merged to 6,356,752.3 m, with the inverse flattening rounded to 298.257".
Longitudes on WGS 84
WGS 84 uses the IERS Reference Meridian as defined by the Bureau International de l'Heure, [European Organisation for the Safety of Air Navigation and IfEN: WGS 84 Implementation Manual, page 13. 1998] which was defined by compilation of star observations in different countries. The mean of this data caused a shift of about 100 metres east away from the
Prime Meridianat Greenwich, UK. [ National Maritime Museum: " [http://www.nmm.ac.uk/server/show/conWebDoc.416 The Longitude of Greenwich] "]
The longitude positions on WGS 84 agree with those on the older North American Datum 1927 at roughly 85° longitude west, in the east-central
Updates and new standards
The latest major revision of WGS 84 is also referred to as "
Earth Gravitational Model 1996" ( EGM96), first published in 1996, with revisions as recent as 2004. This model has the same reference ellipsoid as WGS 84, but has a higher-fidelity geoid (roughly 100 km resolution versus 200 km for the original WGS 84).
Many of the original authors of WGS 84 contributed to a new higher fidelity model, called
EGM2008. [ [http://earth-info.nga.mil/GandG/wgs84/gravitymod/egm2008/index.html Earth Gravitational Model 2008 (EGM2008) - WGS 84 Version] ] This new model will have a geoid with a resolution approaching 10 km, requiring over 4.6 million terms in the spherical expansion (versus 130,317 in EGM96 and 32,757 in WGS 84).
Geo (microformat)- for marking up WGS84 coordinates in (X)HTML
Point of Interest
* [http://earth-info.nga.mil/GandG/publications/tr8350.2/tr8350_2.html NIMA Technical Report TR8350.2] "Department of Defense World Geodetic System 1984, Its Definition and Relationships With Local Geodetic Systems," Third Edition, National Geospatial-Intelligence Agency. This is the official publication of the standard, including addenda. Note this report actually documents the EGM 96 model (a revision of WGS 84). The original WGS 84 is documented in versions prior to 1996.
* [http://earth-info.nga.mil/GandG/wgs84/ Main NGA (was NIMA) page on Earth gravity models]
* [http://www.ngs.noaa.gov/GEOID/geoid_def.html Description of the difference between the geoid and the ellipsoid] from the [http://www.ngs.noaa.gov/GEOID/ US NOAA National Geodetic Survey GEOID page]
* [http://cddis.gsfc.nasa.gov/926/egm96/egm96.html NASA GSFC Earth gravity page]
* [http://boulter.com/gps/ Flexible coordinate converter with mapping]
"The first version of this text was taken from the
public domainbooklet "Geodesy for the Layman" at http://www.ngs.noaa.gov/PUBS_LIB/Geodesy4Layman/TR80003E.HTM#ZZ11 -- please Wikify as necessary. This document was written in 1984 and may need to be updated."
Wikimedia Foundation. 2010.
Look at other dictionaries:
World Geodetic System — Das World Geodetic System (abgekürzt WGS) ist ein globales Referenzsystem der Geodäsie und Navigation. Unter WGS wird heute meist das sogenannte WGS 84 verstanden das derzeit am weitesten verbreitete globale Referenzsystem. Es stellt den bisher… … Deutsch Wikipedia
World Geodetic System 1984 — Das World Geodetic System 1984 (WGS 84) ist ein geodätisches Referenzsystem als einheitliche Grundlage für Positionsangaben auf der Erde und im erdnahen Weltraum. Lage des 50. Breitengrades nach World Geodetic System 1984 (WGS 84) in… … Deutsch Wikipedia
Geodetic system — For other uses, see Geodetic. Geodesy Fundamentals … Wikipedia
Geodetic Reference System 1980 — Das Geodätisches Referenzsystem 1980 (GRS 80, engl. Geodetic Reference System 1980) ist ein Erdmodell, das die wichtigsten Parameter der Erdfigur, ihres Schwerefeldes und der Erdrotation umfasst, oft als Referenzellipsoid bezeichnet. Seine… … Deutsch Wikipedia
Geodetic effect — This article is about precession of orbiting bodies. For observing binary stars, see de Sitter double star experiment. A representation of the geodetic effect … Wikipedia
U.S. Coast and Geodetic Survey — Die Artikel National Geodetic Survey und U.S. Coast and Geodetic Survey überschneiden sich thematisch. Hilf mit, die Artikel besser voneinander abzugrenzen oder zu vereinigen. Beteilige dich dazu an der Diskussion über diese Überschneidungen.… … Deutsch Wikipedia
British national grid reference system — The British national grid reference system is a system of geographic grid references commonly used in Great Britain, different from using latitude and longitude.The Ordnance Survey (OS) devised the national grid reference system, and it is… … Wikipedia
International Terrestrial Reference System — The International Terrestrial Reference System (ITRS) describes procedures for creating reference frames suitable for use with measurements on or near the Earth s surface. This is done in much the same way that a physical standard might be… … Wikipedia
Global Navigation Satellite System — Ein Globales Navigationssatellitensystem (engl. Global Navigation Satellite System, GNSS) ist ein System zur Positionsbestimmung und Navigation auf der Erde und in der Luft durch den Empfang von Satellitensignalen und Signalen von Pseudoliten.… … Deutsch Wikipedia
Herbstlabyrinth–Adventhöhle-System — Herbstlabyrinth 2009 Lage: Westerwald, Deutschland Höhe … Deutsch Wikipedia