 Reference range

In healthrelated fields, a reference range or reference interval usually describes the variations of a measurement or value in healthy individuals. It is a basis for a physician or other health professional to interpret a set of results for a particular patient.
The standard definition of a reference range (usually referred to if not otherwise specified) basically originates in what is most prevalent in a reference group taken from the population. However, there are also optimal health ranges that are those that appear to have the optimal health impact on people.
Contents
Standard definition
The standard definition of a reference range for a particular measurement is defined as the prediction interval between which 95% of values of a reference group fall into, in such a way that 2.5% of the time a sample value will be less than the lower limit of this interval, and 2.5% of the time it will be larger than the upper limit of this interval, whatever the distribution of these values.^{[1]}
Reference ranges that are given by this definition are sometimes referred as standard ranges.
Regarding the target population, if not otherwise specified, a standard reference range generally denotes the one in healthy individuals, or without any known condition that directly affects the ranges being established. These are likewise established using reference groups from the healthy population, and are sometimes termed normal ranges or normal values (and sometimes "usual" ranges/values). However, using the term normal may not be appropriate as not everyone outside the interval is abnormal, and people who have a particular condition may still fall within this interval.
However, reference ranges may also be established by taking samples from the whole population, with or without diseases and conditions. In some cases, diseased individuals are taken as the population, establishing reference ranges among those having a disease or condition. Preferably, there should be specific reference ranges for each subgroup of the population that has any factor that affects the measurement, such as, for example, specific ranges for each sex, age group, race or any other general determinant.
Establishment methods
Normal distribution
The 95% prediction interval, is often estimated by assuming a normal distribution of the measured parameter, in which case it can alternatively be defined as the interval limited by 1.96^{[2]} (often rounded up to 2) standard deviations from either side of the arithmetic mean (usually simply called the "mean").
This method is often acceptably accurate if the standard deviation, as compared to the mean, is not very large.
The following example of this method is based on values of fasting plasma glucose taken from a reference group of 12 subjects:^{[3]}
Fasting plasma glucose
(FPG)
in mmol/LDeviation from
mean mSubject 1 5.5 0.17 Subject 2 5.2 0.13 Subject 3 5.2 0.13 Subject 4 5.8 0.47 Subject 5 5.6 0.27 Subject 6 4.6 0.73 Subject 7 5.6 0.27 Subject 8 5.9 0.57 Subject 9 4.7 0.63 Subject 10 5.0 0.33 Subject 11 5.7 0.37 Subject 12 5.2 0.13 Mean: 5.33
(m)Mean: 0.35
= standard deviation (s.d.)Subsequently, the lower and upper limits of the standard reference range are calculated as:
Thus, the standard reference range for this example is estimated to be 4.6 to 6.0 mmol/L.
Confidence interval of limit
The confidence interval of a standard reference range limit as estimated assuming a normal distribution can be calculated from the standard deviation of a standard reference range limit (SDSRRL) as can be estimated by a diagram such as the one shown at right.
Taking the example from the previous section, the number of samples is 12, corresponding to a SDSRRL of approximately 0.57 standard deviations of the primary value, that is, 0.35mmol/L * 0.57 = 0.1995 mmol/L (appriximately 0.2 mmol/L in this case). Thus, the 95% confidence interval is of a reference range limit can be calculated by:
, where:
 LlciLlrr is the Lower limit of the confidence interval of the Lower limit of the standard reference range
 Llrr is the Lower limit of the standard reference range
 SDSRRL is the standard deviation of the standard reference range limit
Likewise:
, where:
 UlciLlrr is the Upper limit of the confidence interval of the Lower limit of the standard reference range
 Llrr is the Lower limit of the standard reference range
 SDSRRL is the standard deviation of the standard reference range limit
Thus, the lower limit of the reference range can be written as 4.6 (CI 4.25.0) mmol/L.
Likewise, with similar calculations, the upper limit of the reference range can be written as 6.0 (CI 5.66.4) mmol/L.
These confidence intervals reflect random error, but do not compensate for systematic error. In fact, even the lower limit of the confidence interval of the lower limit of the reference range for glucose as established with this reference group is higher than lower reference range limits that are used clinically (being approximately 4.0^{[4]}^{[5]}), which may have been caused by the systematic error of the reference group not having fasted long enough before blood sampling in this case.
Lognormal distribution
In reality, biological parameters tend to have a lognormal distributions,^{[6]} rather than the arithmetical normal distribution (which is generally referred to as normal distribution without any further specification).
An explanation for this lognormal distribution for biological parameters is: The event where a sample has half the value of the mean or median tends to have almost equal probability to occur as the event where a sample has twice the value of the mean or median. Also, only a lognormal distribution can compensate for the inability of almost all biological parameters to be of negative numbers (at least when measured on absolute scales), with the consequence that there is no definite limit to the size of outliers (extreme values) on the high side, but, on the other hand, they can never be less than zero, resulting in a positive skewness.
As shown in diagram at right, this phenomenon has relatively small effect if the standard deviation (as compared to the mean) is relatively small, as it makes the lognormal distribution appear similar to an arithmetical normal distribution. Thus, the arithmetical normal distribution may be more appropriate to use with small standard deviations for convenience, and the lognormal distribution with large standard deviations.
In a lognormal distribution, the geometric standard deviations and geometric mean more accurately estimate the 95% prediction interval than their arithmetic counterparts.
Necessity
The necessity to establish a reference range by lognormal distribution rather than arithmetic normal distribution can be regarded as depending on how much difference it would make to not do so, which can be described as the ratio:
, where:
 Limit_{lognormal} is the (lower or upper) limit as estimated by assuming lognormal distribution
 Limit_{normal} is the (lower or upper) limit as estimated by assuming arithmetically normal distribution.
This difference can be put solely in relation to the coefficient of variation, as in the diagram at right, where:
, where:
 s.d. is the arithmetic standard deviation
 m is the arithmetic mean
In practice, it can be regarded as necessary to use the establishment methods of a lognormal distribution if the difference ratio becomes more than 0.1, meaning that a (lower or upper) limit estimated from an assumed arithmetically normal distribution would be more than 10% different than the corresponding limit as estimated from a (more accurate) lognormal distribution. As seen in the diagram, a difference ratio of 0.1 is reached for the lower limit at a coefficient of variation of 0.213 (or 21.3%), and for the upper limit at a coefficient of variation at 0.413 (41.3%). The lower limit is more affected by increasing coefficient of variation, and its "critical" coefficient variation of 0.213 corresponds to a ratio of (upper limit)/(lower limit) of 2.43, so as a rule of thumb, if the upper limit is more than 2.43 times the lower limit when estimated by assuming arithmetically normal distribution, then it should be considered to do the calculations again by lognormal distribution.
Taking the example from previous section, the arithmetic standard deviation (s.d.) is estimated at 0.35 and the arithmetic mean (m) is estimated at 5.33. Thus the coefficient of variation is 0.066. This is less than both 0.213 and 0.413, and thus both the lower and upper limit of fasting blood glucose can most likely be estimated by assuming arithmetically normal distribution. More specifically, a the coefficient of variation of 0.066 corresponds to a difference ratio of 0.0072 (0.7%) for the lower limit and and 0.0054 (0.5%) for the upper limit.
By logarithmized sample values
A method to estimate the reference range for a parameter with lognormal distribution is to logarithmize all the measurements with an arbitrary base (for example e), derive the mean and standard deviation of these logarithms, determine the logarithms located (for a 95% prediction interval) 1.96 standard deviations below and above that mean, and subsequently exponentiate using those two logarithms as exponents and using the same base as was used in logarithmizing, with the two resultant values being the lower and upper limit of the 95% prediction interval.
The following example of this method is based on the same values of fasting plasma glucose as used in the previous section, using e as a base:^{[3]}
Fasting plasma glucose
(FPG)
in mmol/Llog_{e}(FPG) log_{e}(FPG) deviation from
mean μ_{log}Subject 1 5.5 1.70 0.029 Subject 2 5.2 1.65 0.021 Subject 3 5.2 1.65 0.021 Subject 4 5.8 1.76 0.089 Subject 5 5.6 1.72 0.049 Subject 6 4.6 1.53 0.141 Subject 7 5.6 1.72 0.049 Subject 8 5.9 1.77 0.099 Subject 9 4.7 1.55 0.121 Subject 10 5.0 1.61 0.061 Subject 11 5.7 1.74 0.069 Subject 12 5.2 1.65 0.021 Mean: 5.33
(m)Mean: 1.67
(μ_{log})Mean: 0.064
= standard deviation of log_{e}(FPG)
(σ_{log})Subsequently, the still logarithmized lower and upper limit of the reference range is calculated as:
Conversion back to nonlogarithmized values are subsequently performed as:
Thus, the standard reference range for this example is estimated to be 4.7 to 6.0.
From arithmetic mean and variance
An alternative method of establishing a reference range with the assumption of lognormal distribution is to use the arithmetic mean and arithmetic value of standard deviation. This is somewhat more tedious to perform, but may be useful for example in cases where a study that establishes a reference range presents only the arithmetic mean and standard deviation, leaving out the source data. If the original assumption of arithmetically normal distribution is shown to be less appropriate than the lognormal one, then, using the arithmetic mean and standard deviation may be the only available parameters to correct the reference range.
By assuming that the expected value can represent the arithmetic mean in this case, the parameters μ_{log} and σ_{log} can be estimated from the arithmetic mean (m) and standard deviation (s.d.) as:
Following the exampled reference group from the previous section:
Subsequently, the logarithmized, and later nonlogarithmized, lower and upper limit are calculated just as by logarithmized sample values.
Directly from percentages of interest
Reference ranges can also be established directly from the 2.5th and 97.5th percentile of the measurements in the reference group. For example, if the reference group consists of 200 people, and counting from the measurement with lowest value to highest, the lower limit of the reference range would correspond to the 5th measurement and the upper limit would correspond to the 195th measurement.
This method can be used even when measurement values do not appear to conform conveniently to any form of normal distribution or other function.
However, the reference range limits as estimated in this way have higher variance, and therefore less reliability, than those estimated by an arithmetic or lognormal distribution (when such is applicable), because the latter ones acquire statistical power from the measurements of the whole reference group rather than just the measurements at the 2.5th and 97.5th percentiles. Still, this variance decreases with increasing size of the reference group, and therefore, this method may be optimal where a large reference group easily can be gathered, and the distribution mode of the measurements is uncertain.
Bimodal distribution
In case of a bimodal distribution (seen at right), it is useful to find out why this is the case. Two reference ranges can be established for the two different groups of people, making it possible to assume a normal distribution for each group. This bimodal pattern is commonly seen in tests that differ between men and women, such as prostate specific antigen.
Interpretation of standard ranges in medical tests
In case of medical tests whose results are of continuous values, reference ranges can be used in the interpretation of an individual test result. This is primarily used for diagnostic tests and screening tests, while monitoring tests may optimally be interpreted from previous tests of the same individual instead.
Probability of random variability
Reference ranges aid in the evaluation of whether a test result's deviation from the mean is a result of random variability or a result of an underlying disease or condition. If the reference group used to establish the reference range can be assumed to be representative of the individual person in a healthy state, then a test result from that individual that turns out to be lower or higher than the reference range can be interpreted as that there is less than 2.5% probability that this would have occurred by random variability in the absence of disease or other condition, which, in turn, is strongly indicative for considering an underlying disease or condition as a cause.
Such further consideration can be performed, for example, by an epidemiologybased differential diagnostic procedure, where potential candidate conditions are listed that may explain the finding, followed by calculations of how probable they are to have occurred in the first place, in turn followed by a comparison with the probability that the result would have occurred by random variability.
If the establishment of the reference range could have been made assuming a normal distribution, then the probability that the result would be an effect of random variability can be further specified as follows:
The standard deviation, if not given already, can be inversely calculated by the fact that the absolute value of the difference between the mean and either the upper or lower limit of the reference range is approximately 2 standard deviations (more accurately 1.96), and thus:
The standard score for the individual's test can subsequently be calculated as:
The probability that a value is of a certain distance from the mean can subsequently be calculated from the relation between standard score and prediction intervals. For example, a standard score of 2.58 corresponds to a prediction interval of 99%,^{[7]} corresponding to a probability of 0.5% that a result is at least such far from the mean in the absence of disease.
Example
Method is described in further detail in Differential diagnosisAn individual takes a test that measures the ionized calcium in the blood, resulting in a value of 1.30 mmol/L, and a reference group that appropriately represents the individual has established a reference range of 1.05 to 1.25 mmol/L. The individual's value is higher than the upper limit of the reference range, and therefore has less than 2.5% probability of being a result of random variability, constituting a strong indication to make a differential diagnosis of possible causative conditions.
In this case, a epidemiologybased differential diagnostic procedure is used, and its first step is to find candidate conditions that can explain the finding.
Hypercalcemia (usually defined as a calcium level above the reference range) is mostly caused by either primary hyperparathyroidism or malignancy,^{[8]} and therefore, it is reasonable to include these in the differential diagnosis.
Using for example epidemiology and the individual's risk factors, let's say that the probability that the hypercalcemia would have been caused by primary hyperparathyroidism in the first place is estimated to be 0.00125 (or 0.125%), the equivalent probability for cancer is 0.0002, and 0.0005 for other conditions. With a probability given as less than 0.025 of no disease, this corresponds to a probability that the hypercalcemia would have occurred in the first place of up to 0.02695. However, the hypercalcemia has occurred with a probability of 100%, resulting adjusted probabilities of at least 4.6% that primary hyperparathyroidism has caused the hypercalcemia, at least 0.7% for cancer, at least 1.9% for other conditions and up to 92.8% for that there is no disease and the hypercalcemia is caused by random variability.
In this case, further processing most likely requires specification of the probability of random variability:
The value is assumed to conform acceptably to a normal distribution, so the mean can be assumed to be 1.15 in the reference group. The standard deviation, if not given already, can be inversely calculated by knowing that the absolute value of the difference between the mean and, for example, the upper limit of the reference range, is approximately 2 standard deviations (more accurately 1.96), and thus:
The standard score for the individual's test is subsequently calculated as:
The probability that a value is of so much larger value than the mean as having a standard score of 3 corresponds to a probability of approximately 0.14% (given by (100%99.7%)/2, with 99.7% here being given from the 689599.7 rule).
Using the same probabilities that the hypercalcemia would have occurred in the first place by the other canditate conditions, the probability that hypercalcemia would have occurred in the first place is 0.00335, and given the fact that hypercalcemia has occurred gives adjusted probabilities of 37.3%, 6.0%, 14.9% and 41.8%, respectively, for primary hyperparathyroidism, cancer, other conditions and no disease.
Optimal health range
Optimal (health) range or therapeutic target (not to be confused with biological target) is a reference range or limit that is based on concentrations or levels that are associated with optimal health or minimal risk of related complications and diseases, rather than the standard range based on normal distribution in the population.
It may be more appropriate to use for e.g. folate, since approximately 90 percent of North Americans may actually suffer more or less from folate deficiency, ^{[9]} but only the 2.5 percent that have the lowest levels will fall below the standard reference range. In this case, the actual folate ranges for optimal health are substantially higher than the standard reference ranges. Vitamin D has a similar tendency. In contrast, for e.g. uric acid, having a level not exceeding the standard reference range still does not exclude the risk of getting gout or kidney stones.
A problem with optimal health range is a lack of a standard method of estimating the ranges. The limits may be defined as those where the health risks exceed a certain threshold, but with various risk profiles between different measurements (such as folate and vitamin D), and even different risk aspects for one and the same measurement (such as both deficiency and toxicity of vitamin A) it is difficult to standardize. Subsequently, optimal health ranges, when given by various sources, have an additional variability caused by various definitions of the parameter. Also, as with standard reference ranges, there should be specific ranges for different determinants that affects the values, such as sex, age etc. Ideally, there should rather be an estimation of what is the optimal value for every individual, when taking all significant factors of that individual into account  a task that may be hard to achieve by studies, but long clinical experience by a physician may make this method more preferable than using reference ranges.
Onesided cutoff values
In many cases, only one side of the range is usually of interest, such as with markers of pathology including cancer antigen 199, where it is generally without any clinical significance to have a value below what is usual in the population. Therefore, such targets are often given with only one limit of the reference range given, and, strictly, such values are rather cutoff values or threshold values.
They may represent both standard ranges and optimal health ranges. Also, they may represent an appropriate value to distinguish healthy person from a specific disease, although this gives additional variability by different diseases being distinguished. For example, for NTproBNP, a lower cutoff value is used in distinguishing healthy babies from those with acyanotic heart disease, compared to the cutoff value used in distinguishing healthy babies from those with congenital nonspherocytic anemia.^{[10]}
General drawbacks
For standard as well as optimal health ranges, and cutoffs, sources of inaccuracy and imprecision include:
 Instruments and lab techniques used, or how the measurements are interpreted by observers. These may apply both to the instruments etc. used to establish the reference ranges and the instruments, etc. used to acquire the value for the individual to whom these ranges is applied. To compensate, individual laboratories should have their own lab ranges to account for the instruments used in the laboratory.
 Determinants such as age, diet, etc. that are not compensated for. Optimally, there should be reference ranges from a reference group that is as similar as possible to each individual they are applied to, but it's practically impossible to compensate for every single determinant, often not even when the reference ranges are established from multiple measurements of the same individual they are applied to, because of testretest variability.
Also, reference ranges tend to give the impression of definite thresholds that clearly separate "good" or "bad" values, while in reality there are generally continuously increasing risks with increased distance from usual or optimal values.
With this and uncompensated factors in mind, the ideal interpretation method of a test result would rather consist of a comparison of what would be expected or optimal in the individual when taking all factors and conditions of that individual into account, rather than strictly classifying the values as "good" or "bad" by using reference ranges from other people.
Examples
 Reference ranges for urine tests
See also
 Clinical pathology
 Joint Committee for Traceability in Laboratory Medicine
 Medical technologist
 Reference ranges for blood tests
References
 ^ Page 19 in: Stephen K. Bangert MA MB BChir MSc MBA FRCPath; William J. Marshall MA MSc PhD MBBS FRCP FRCPath FRCPEdin FIBiol; Marshall, William Leonard (2008). Clinical biochemistry: metabolic and clinical aspects. Philadelphia: Churchill Livingstone/Elsevier. ISBN 0443101868.
 ^ Page 48 in: Sterne, Jonathan; Kirkwood, Betty R. (2003). Essential medical statistics. Oxford: Blackwell Science. ISBN 0865428719.
 ^ ^{a} ^{b} Table 1. Subject characteristics in: Keevil, B. G.; Kilpatrick, E. S.; Nichols, S. P.; Maylor, P. W. (1998). "Biological variation of cystatin C: Implications for the assessment of glomerular filtration rate". Clinical chemistry 44 (7): 1535–1539. PMID 9665434.
 ^ Reference range list from Uppsala University Hospital ("Laborationslista"). Artnr 40284 Sj74a. Issued on April 22, 2008
 ^ Last page of Deepak A. Rao; Le, Tao; Bhushan, Vikas (2007). First Aid for the USMLE Step 1 2008 (First Aid for the Usmle Step 1). McGrawHill Medical. ISBN 0071498680.
 ^ Huxley, Julian S. (1932). Problems of relative growth. London. ISBN 0486611140. OCLC 476909537.
 ^ Page 111 in: Kirkup, Les (2002). Data analysis with Excel: an introduction for physical scientists. Cambridge, UK: Cambridge University Press. ISBN 0521797373.
 ^ Table 204 in: Mitchell, Richard Sheppard; Kumar, Vinay; Abbas, Abul K.; Fausto, Nelson. Robbins Basic Pathology. Philadelphia: Saunders. ISBN 1416029737. 8th edition.
 ^ Folic Acid: Don't Be Without It! by Hans R. Larsen, MSc ChE, retrieved on July 7, 2009. In turn citing:
 Boushey, Carol J., et al. A quantitative assessment of plasma homocysteine as a risk factor for vascular disease. Journal of the American Medical Association, Vol. 274, October 4, 1995, pp. 1049 57
 Morrison, Howard I., et al. Serum folate and risk of fatal coronary heart disease. Journal of the American Medical Association, Vol. 275, June 26, 1996, pp. 189396
 ^ Screening for Congenital Heart Disease with NTproBNP: Results By Emmanuel Jairaj Moses, Sharifah A.I. Mokhtar, Amir Hamzah, Basir Selvam Abdullah, and Narazah Mohd Yusoff. Laboratory Medicine. 2011;42(2):7580. © 2011 American Society for Clinical Pathology
Further reading
The procedures and vocabulary referring to reference intervals: CLSI (Committee for Laboratory Standards Institute) and IFCC (International Federation of Clinical Chemistry) CLSI  Defining, Establishing, and Verifying Reference Intervals in the Laboratory; Approved guideline  Third Edition. Document C28A3 (ISBN 1562386824)Wayne, PA, USA, 2008
Medical test: Serology, reference range: Clinical biochemistry blood tests (including BMP, CMP) (CPT 8200084999) Fluid/electrolytes electrolytes (Na^{+}/K^{+}, Cl^{}/HCO_{3}^{}) · renal function, BUNtocreatinine ratio (BUN/Creatinine) · Ca
derived values: Plasma osmolality · Serum osmolal gapAcidbase Nutrition Iron tests: Transferrin saturation = Serum iron / Total ironbinding capacity; Ferritin · Transferrin · Transferrin receptorEndocrine ACTH stimulation test · Thyroid function tests (TSH)
Blood sugar: Glucose test · Cpeptide · Fructosamine · Glycated hemoglobinMetabolic Cardiovascular Digestive Liver function tests: protein tests (Human serum albumin, Serum total protein) · ALP · transaminases (ALT, AST, AST/ALT ratio) · Bilirubin (Unconjugated, Conjugated)
Amylase · Lipase (Pancreatic lipase)Medical test: Reference range, Urine tests (CPT 8100081099) Protein Small molecules Blood cells Chemical properties Other Urinary castsMedical test: Reference ranges, CSF tests (CPT 8200084999) Albumin CSF albumin · CSF/serum albumin ratioGlucose CSF glucose · CSF/serum glucose ratioOther see also reference ranges for urine tests Categories:
Wikimedia Foundation. 2010.
Look at other dictionaries:
reference range — pamatinė verčių sritis statusas T sritis Standartizacija ir metrologija apibrėžtis Apibrėžtų verčių, priklausančių vienam pamatinių naudojimo sąlygų rinkiniui, sritis. atitikmenys: angl. reference range vok. Referenzbereich, m rus. нормированная… … Penkiakalbis aiškinamasis metrologijos terminų žodynas
reference range of influence quantity — pamatinė paveikiojo dydžio verčių sritis statusas T sritis Standartizacija ir metrologija apibrėžtis Paveikiojo dydžio verčių sritis, kurios ribose galima nepaisyti jo poveikio matavimo rezultatui. atitikmenys: angl. reference range of influence… … Penkiakalbis aiškinamasis metrologijos terminų žodynas
Reference ranges for blood tests — Reference ranges edit in: blood urine CSF feces Reference ranges for blood tests are sets of values used by a health professional to interpret a set of … Wikipedia
Range factor — (commonly abbreviated RF) is a baseball statistic developed by Bill James. It is calculated by dividing putouts and assists by number of innings or games played at a given defense position. [http://www.baseball reference.com/about/field… … Wikipedia
range — noun 1》 the area of variation between limits on a particular scale. 2》 a set of different things of the same general type: a wide range of banking services. 3》 the scope or extent of a person s or thing s abilities or capacity. 4》 the distance… … English new terms dictionary
Reference — For help in citing references, see Wikipedia:Citing sources. For the Wikipedia Reference Desk, see Wikipedia:Reference desk. Reference is derived from Middle English referren, from Middle French rèférer, from Latin referre, to carry back , formed … Wikipedia
Reference ellipsoid — In geodesy, a reference ellipsoid is a mathematically defined surface that approximates the geoid, the truer figure of the Earth, or other planetary body.Because of their relative simplicity, reference ellipsoids are used as a preferred surface… … Wikipedia
Reference antenna — A reference antenna is an antenna with known performance. It is normally used to calibrate other systems.Reference antennas are built with particular care taken to make them simple, robust and repeatable. In a common usage scenario a reference… … Wikipedia
reference — Synonyms and related words: acknowledgment, advocacy, advocating, advocation, affective meaning, allusion, angle, appeal to, applicability, application, appositeness, aspect, bearing, by line, case, certificate of character, certification,… … Moby Thesaurus
Reference circuit — A reference circuit is a hypothetical electric circuit of specified equivalent length and configuration, and having a defined transmission characteristic or characteristics, used primarily as a reference for measuring the performance of other,… … Wikipedia