List of ISO standards


List of ISO standards

This is a list of ISO standards that are discussed in Wikipedia articles. For a list of all the more than 16,000 ISO standards (as of 2007), see the [http://www.iso.org/iso/en/CatalogueListPage.CatalogueList ISO Catalogue] .

About 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely/publicly available. [ [http://www.iso.org/PubliclyAvailableStandards Freely Available Standards ] ]

ISO 1–ISO 999

*ISO 1 Standard reference temperature for geometrical product specification and verification
*ISO 3 Preferred numbers
*ISO 4 Rules for the abbreviation of title words and titles of publications
*ISO 7 Pipe threads where pressure-tight joints are made on the threads
*ISO 9 Information and documentation — Transliteration of Cyrillic characters into Roman characters — Slavic and non-Slavic languages
*ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
*ISO 31 Quantities and units
*ISO 68-1 Basic profile of metric screw threads
*ISO 216 paper sizes, e.g. the A4 paper size
*ISO 226 Phon based on Fletcher-Munson curves
**ISO 226:2003 Phon based on newer Equal-loudness contours
*ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation.
*ISO 233:1984 Transliteration of Arabic characters into Roman characters
**ISO 233-2:1993 Transliteration of Arabic characters into Roman characters — Part 2: Arabic language — Simplified transliteration
*ISO 259:1984 Documentation — Transliteration of Hebrew characters into Roman characters
**ISO 259-2:1994 Transliteration of Hebrew characters into Roman characters — Part 2: Simplified transliteration
*ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
*ISO 500 Agricultural tractors — Rear-mounted power take-off
*ISO 639 Codes for the representation of names of languages
**ISO 639-1 Codes for the representation of names of languages — Part 1: Alpha-2 code
**ISO 639-2 Codes for the representation of names of languages — Part 2: Alpha-3 code
**ISO 639-3 Codes for the representation of names of languages — Part 3: Alpha-3 code for comprehensive coverage of languages
*ISO/IEC 646 internationalized 7 bit ASCII variants
*ISO 657 Hot-rolled steel sections
* ISO 668 Specification for Shipping Containers
*ISO 690 bibliographic references
*ISO 732 Photography — 120-size and 220-size films — Dimensions
*ISO 838 Standard for punching filing holes into paper
*ISO 843:1997 Conversion of Greek characters into Roman characters
*ISO 999 Guidelines for the content, organization, and presentation of indexes

ISO 1000–ISO 9999

*ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
*ISO 1004 Magnetic ink character recognition
*ISO 1007 135 film format
*ISO/IEC 1539 Fortran programming language
*ISO 1629 Establishes a system of terms and nomenclature for polymers
*ISO/IEC 2022 Information technology: Character code structure and extension techniques
*ISO 2108 International standard book numbering (ISBN)
*ISO 2145 Numbering of divisions and subdivisions in written documents
*ISO 2171 Cereals and milled cereal products — Determination of total ash
*ISO 2281 Water-resistant watches
*ISO 2533 Standard Atmosphere
*ISO 2709 Format for information exchange (e.g. MARC)
*ISO 3029 126 film format
*ISO 3082 Iron ores — Sampling and sample preparation procedures
*ISO 3103 Method of brewing tea for the purpose of sensory tests
*ISO 3166 codes for countries and subdivisions
**ISO 3166-1 codes for country and dependent area names, first published in 1974
***ISO 3166-1 alpha-2 two-letter country codes
***ISO 3166-1 alpha-3 three-letter country codes
***ISO 3166-1 numeric
**ISO 3166-2 principal subdivisions of a country or dependent area.
**ISO 3166-3 superseded ISO 3166-1 codes, first published in 1998.
*ISO 3297 International standard serial number (ISSN)
*ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners.
*ISO 3602 Romanization of Japanese
*ISO 3632 Quality of Saffron
*ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
*ISO 3864 Safety labels
*ISO 3901 International Standard Recording Code (ISRC)
*ISO 3977 Design and procurement standards for gas turbine system applications
*ISO 4157 Subdivision of construction works
**ISO 4157-1: buildings and part of buildings
**ISO 4157-2: room numbers
**ISO 4157-3: room identifiers
*ISO 4217 Currency codes
* 8-bit code for information interchange
*ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
**ISO 5167-1 Part 1: General principles and requirements
**ISO 5167-2 Part 2: Orifice plates
**ISO 5167-3 Part 3: Nozzles and Venturi nozzles
**ISO 5167-4 Part 4: Venturi tubes
*ISO 5218 Representation of human sexes
*ISO 5455 Technical drawings: scales
*ISO 5775 Bicycle tyres and rims
*ISO 5800 Photographic Film speed
*ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
*ISO 5971:1981 Size designation of clothes — Pantyhose
*ISO 6166 structure of an International Securities Identifying Number (ISIN)
*ISO 6344 Coated abrasives — Grain size analysis
** ISO 6344-1 Part 1: Grain size distribution test
** ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220
** ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500
*ISO 6429 Information technology: Control functions for coded character sets
*ISO 6438 Documentation — African coded character set for bibliographic information interchange
*ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
*ISO 6946 Building components and building elements — Thermal resistance and thermal transmittance — Calculation method
*ISO 7001 Public Information Symbols
* ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
*ISO 7098 Romanization of Chinese
*ISO 7372 Trade data interchange
*ISO/IEC 7501-1:1997 Identification cards — Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
*ISO 7736 Car radio installation space
*ISO 7810 Standards for financial cards (credit and debit cards)
*ISO 7811 Recording technique on identification cards
*ISO 7816 Smartcards
*ISO/IEC 7942 Graphical Kernel System
*ISO 8090 Cycles — Terminology
*ISO 8373 Manipulating Industrial Robots — Vocabulary
*ISO 8402 Quality Management and Quality Assurance - Vocabulary
*ISO 8501-1 Preparation of steel substrates before application of paints and related products
*ISO 8555 Environmental management systems.
*ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
*ISO 8583 Financial transaction card originated messages — Interchange message specifications
**ISO 8583-1 Part 1: Messages, data elements and code values
**ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
**ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values
*ISO 8601 Date and time representation
*ISO/IEC 8613 Open Document Architecture
*ISO/IEC 8632 Computer Graphics Metafile
*ISO 8651 Graphical Kernel System language bindings
*ISO/IEC 8652: Information technology — Programming languages — Ada
*ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806.
*ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
*ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
*ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
*ISO/IEC 8825 ASN.1 Encoding Rules
*ISO 8859 8-bit coded character sets
**ISO 8859-1 Latin-1
**ISO 8859-2 Latin-2
**ISO 8859-3 Latin-3 or "South European"
**ISO 8859-4 Latin-4 or "North European"
**ISO 8859-5 Cyrillic
**ISO 8859-6 Arabic
**ISO 8859-7 Greek
**ISO 8859-8 Hebrew
**ISO 8859-9 Latin-5
**ISO 8859-10 Latin-6, rearrangement of 8859-4
**ISO 8859-11 Thai
**ISO 8859-13 Latin-7 or "Baltic Rim"
**ISO 8859-14 Latin-8 or "Celtic"
**ISO 8859-15 Latin-9, revision of 8859-1
**ISO 8859-16 Latin-10 South-Eastern European languages and others
*ISO 8879 Standard Generalized Markup Language (SGML)
*ISO 9000 Quality management system in production environments
*ISO 9001 Quality management
*ISO 9069 SGML support facilities — SGML Document Interchange Format (SDIF)
*ISO/IEC 9075 SQL
*ISO 9126 Software quality model
* ISO 9141 Network interconnection of computers in a vehicle
** ISO 9141-2 OBD-II standard, aka 9141 CARB standard
*ISO 9241 Ergonomic requirements for office work with visual display terminals
*ISO 9362 Bank Identifier Code or BIC system
*ISO 9407 Shoe sizes
* ISO/IEC 9541 Information technology — Font information interchange
** ISO/IEC 9541-1:1991 Information technology — Font information interchange — Part 1: Architecture
** ISO/IEC 9541-2:1991 Information technology — Font information interchange — Part 2: Interchange Format
** ISO/IEC 9541-3:1994 Information technology — Font information interchange — Part 3: Glyph shape representation
*ISO 9564 Banking — Personal Identification Number (PIN) management and security (in ATM and POS systems)
*ISO/IEC 9579 Remote database access for SQL
*ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)
*ISO 9660 CD-ROM file system
*ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittance
*ISO 9899 C programming language
*ISO/IEC 9945 Portable Operating System Interface (POSIX)
*ISO 9984 Conversion of Georgian characters into Roman characters
*ISO 9985 Conversion of Armenian characters into Roman characters
* Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
*ISO 9999 Technical aids for persons with disabilities. Classification and terminology

ISO 10000–ISO 19999

*ISO 10006 Quality management — Guidelines to quality in project management
*ISO 10007 Quality management — Guidelines for configuration management
*ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
*ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
*ISO/IEC 10026 Open Systems Interconnection
*ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
*ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange — 650 MB per cartridge
*ISO 10160 Interlibrary Loan Application Service Definition — defines terminology used in interlibrary loan
*ISO 10161 Interlibrary Loan Application Protocol
* Document Style Semantics and Specification Language (DSSSL)
* Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
*ISO 10206 Extended Pascal (programming language)
*ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
*ISO 10279 BASIC programming language
*ISO 10303 Industrial automation systems and integration — Product data representation and exchange. Known as STEP, STandard for the Exchange of Product data
*ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
*ISO 10487 Connections for passenger car stereos
*ISO 10628 Flow diagrams for process plants
*ISO 10646 Universal Character Set (equivalent to Unicode's character set)
*ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
*ISO 10957 Information and documentation — International Standard Music Number (ISMN)
*ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
*ISO 11064 Ergonomic Design of Control Centres
**ISO 11062-1:2000 Part 1: Principles for the design of control centres
**ISO 11062-2:2000 Part 2: Principles for the arrangement of control suites
**ISO 11062-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
**ISO 11062-3:2004 Part 4: Layout and dimensions of workstations
**ISO 11062-3:2005 Part 6: Environmental requirements for control centres
*ISO/IEC 11172 MPEG-1
*ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
*ISO/IEC 11179 Information Technology — Metadata Registries (MDR)
**ISO/IEC 11179-1:2004 Part 1: Framework
**ISO/IEC 11179-2:2005 Part 2: Classification
**ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
**ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
**ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
**ISO/IEC 11179-6:2005 Part 6: Registration
*ISO 11180 Postal addressing
*ISO/IEC 11404:1996 Language-independent datatypes (See also General purpose datatypes
* Plastics -- Generic identification and marking of plastics products
*ISO 11521 Replaced by ISO 15022
*ISO/IEC 11578:1996 Information technologyOpen Systems InterconnectionRemote procedure call (RPC)
*ISO 11783 aka. IsoBus — J1939-based communication protocol for the agriculture industry.
*ISO/IEC 11801 Information technology — Generic cabling for customer premises
*ISO 11898 Road vehicles — Controller area network (CAN)
*ISO 12006 Building construction. Organization of information about construction works.
*ISO 13239 High-level data link control (HDLC) procedures
*ISO/IEC 13249 SQL multimedia and application packages
*ISO/IEC 13250 Topic map
*ISO 13346 Volume and file structure of write-once and rewritable media, which UDF is based on.
*ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
*ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
**ISO 13406-1:1999 Part 1: Introduction
**ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
*ISO 13407:1999 Human-centred design processes for interactive systems
*ISO 13450 110 film format
* Comprehensive management system for the design and manufacture of medical devices.
*ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange
*ISO 13567"/1 to 3" Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
* Information Technology — Z Formal Specification Notation — Syntax, Type System and Semantics
*ISO 13616 Bank Account Numbers (IBAN)
*ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
*ISO/IEC 13818 MPEG-2
*ISO 14000 Environmental Management Standards in production environments
*ISO 14001 Environmental Management
*ISO 14064 Greenhouse Gases
*ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000
**ISO 14230-1 Physical layer
**ISO 14230-2 Data link layer
**ISO 14230-3 Application layer
**ISO 14230-4 Requirements for emission-related systems
*ISO/IEC 14443 Identification cards — Contactless integrated circuit(s) cards — Proximity cards
*ISO/IEC 14496 MPEG-4
*ISO 14644 Standards Cleanrooms and associated controlled environments
**ISO 14644-1 Classification of Air Cleanliness
**ISO 14644-2 Testing and Monitoring to prove Compliance
**ISO 14644-3 Metrology & Test Methods
**ISO 14644-4 Design, Construction and Start-up
**ISO 14644-5 Operations
**ISO 14644-6 Vocabulary
**ISO 14644-7 Separative Devices
**ISO 14644-8 Classification of Airborne Molecular Contamination
**ISO 14644-9 Clean Surfaces
*ISO 14651 Information technology: International string ordering and comparison
* [http://www.iest.org/i4a/pages/index.cfm?pageid=3321 ISO 14698 Standards]
**ISO-14698-1 Bio-contamination Control — General Principles
**ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
*ISO 14750 Information technology — Open Distributed Processing — Interface Definition Language
*ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
* Aerobic Biodegradation under controlled composting conditions
* Aerobic Biodegradation under controlled composting conditions with gravimetric measurement of carbon dioxid
*ISO/IEC 14882 Programming Languages — C++
*ISO 14915 Software ergonomics for multimedia user interfaces
**ISO 14915-1:2002 Part 1: Design principles and framework
**ISO 14915-2:2003 Part 2: Multimedia navigation and control
**ISO 14915-3:2002 Part 3: Media selection and combination
*ISO 14971 Medical Devices — Application Of Risk Management To Medical Devices
*ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
*ISO 15000 Electronic business eXtensible Markup Language ebXML
**ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
**ISO 15000-2:2004 Part 2: Message service specification (ebMS)
**ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
**ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
**ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
*ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
*ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
*ISO 15189 Medical laboratories — Particular requirements for quality and competence
*ISO 15288 Systems engineering — System life cycle processes
*ISO 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
*ISO/IEC 15291: Information technology — Programming languages — Ada Semantic Interface Specification ()
*ISO/IEC 15408 Common Criteria — Evaluation Criteria for Information Technology Security
*ISO/IEC 15434 2D Data Matrix barcode
*ISO/IEC 15444 JPEG 2000
*ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
*ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination).
*ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test
*ISO 15686 Service life planning for constructive works in 10 parts
*ISO 15693 Transponders
*ISO 15706 International Standard Audiovisual Number
*ISO 15707 International Standard Musical Work Code
*ISO 15836 The Dublin Core metadata element set
*ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
*ISO 15924 Codes for the representation of names of scripts
*ISO 15930 Portable Document Format PDF
*ISO/IEC 15948:2003. Portable Network Graphics PNG
*ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
*ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
*ISO/IEC 16262. ECMAScript
*ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment.
* ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
*ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
* specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
*ISO/IEC 17025 General requirements for competence of test and calibration laboratories
* ISO 17776 : Petroleum industries
*ISO/IEC 17799 Information technology: Code of practice for information security management
*ISO/IEC 17894 Ships and marine technology — Computer applications — General principles for development and use of PES in marine applications
*ISO 18000-7 Wireless standard for active RFID (Radio Frequency Identification)
*ISO/IEC 18004: QR Code Standardization
*ISO/IEC 18009: Information technology — Programming languages — Ada: Conformity assessment of a language processor ()
*ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
*ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
*ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
*ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
*ISO 18629 standardized Process Specification Language (PSL).
*ISO 19005 PDF
*ISO 19011 standard providing guidelines for quality and environmental management systems auditing
*ISO 19092-1 Financial Services — Security — Part 1: Security framework
*ISO 19092-2 Financial Services — Security — Part 2: Message syntax and cryptographic requirements
*ISO 19101 Geographic Information: Reference model
*ISO 19105 Geographic Information: Conformance and testing
*ISO 19107 Geographic Information: Spatial schema
*ISO 19108 Geographic Information: Temporal schema
*ISO 19109 Geographic Information: Rules for Application Schema
*ISO 19110 Geographic Information: Feature cataloguing methodology
*ISO 19111 Geographic Information: Spatial referencing by coordinates
*ISO 19111 Geographic Information: Spatial referencing by identifier
*ISO 19113 Geographic Information: Quality principles
*ISO 19114 Geographic Information: Quality evaluation procedures
*ISO 19115 Geographic Information: Metadata
*ISO 19123 Geographic Information: Coverage schema
*ISO 19128 Geographic Information: Web Map Service
*ISO 19131 Geographic Information: Data product specification
*ISO 19136 Geographic Information: Geography Markup Language
*ISO/IEC 19501 Unified Modeling Language (UML)
*ISO/IEC 19502 Meta-Object Facility (MOF)
*ISO/IEC 19503 XML Metadata Interchange (XMI)
*ISO/IEC 19757 Document Schema Definition Languages (DSDL)
**ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG
**ISO/IEC 19757-3 Rule-based validation — Schematron
*ISO/IEC 19770 Information technology — Software asset management
*ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
*ISO/IEC 19794 Information technology - Biometric data interchange formats
**ISO/IEC 19794-1:2006 Part 1: Framework
**ISO/IEC 19794-2:2005 Part 2: Finger minutiae data
**ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data
**ISO/IEC 19794-4:2005 Part 4: Finger image data
**ISO/IEC 19794-5:2005 Part 5: Face image data
**ISO/IEC 19794-6:2005 Part 6: Iris image data
**ISO/IEC 19794-7:2007 Part 7: Signature/sign time series data
**ISO/IEC 19794-8:2006 Part 8: Finger pattern skeletal data
**ISO/IEC 19794-9:2007 Part 9: Vascular image data
**ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data

ISO 20000–ISO 29999

* IT Service Management System (based on BS15000)
*ISO 20022 Financial Services — universal financial industry message scheme
*ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
**ISO/IEC TR 20943-1:2003 Part 1: Data elements
**ISO/IEC TR 20943-3:2004 Part 3: Value domains
*ISO 22000 Food safety management systems — Requirements for any organization in the food chain
* ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
*ISO/IEC TR 22250 Regular Language description for XML — (RELAX)
**ISO/IEC TR 22250-1:2002 RELAX Core
* ISO/PAS 22399:2007 Social security - Guideline for incident preparedness and operational continuity management
*ISO 22716:2007: Cosmetics.
*ISO/IEC 23270:2003 C# Programming Language
*ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
**ISO/IEC 23360-1 — Part 1: Generic specification
**ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
**ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
**ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
**ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
**ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
**ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
**ISO/IEC 23360-8 — Part 8: Specification for S390X architecture
*ISO 23950 Library standard ANSI/NISO Z39.50 — Protocol for searching and retrieving information, usually from bibliographic records
*ISO/IEC 24727 Identification Cards — Integrated Circuit Card Programming Interfaces
**ISO/IEC 24727-1 — Part 1: Architecture
**ISO/IEC FCD 24727-2 — Part 2: Generic card interface
**ISO/IEC FCD 24727-3 — Part 3: Application interface
**ISO/IEC CD 24727-4 — Part 4: API Administration
**ISO/IEC WD 24727-5 — Part 5: Testing
**ISO/IEC WD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability
*ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for informationand communications technology disaster recovery services
*ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471
*ISO26000 Guideline about Social Responsibility also called "ISO SR"
*ISO/IEC 26300 OpenDocument Format (.odf)
*ISO/IEC 27001 Information technology — Security techniques — Information security management systems — Requirements

ISO 30000–ISO 39999

*ISO 32000 — Portable Document Format.
*ISO/IEC 38500 — Corporate Governance of Information Technology

ee also

* International Classification for Standards
* ISO/TS 16949
* List of IEC standards
* List of EN standards

References

External links

* [http://iso.w3j.com ISO Standards] The complete list of all ISO published standards.
* [http://www.iest.org/i4a/pages/index.cfm?pageid=3282 ISO 14644 and ISO 14698 Standards] through IEST


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • List of IEC standards — In order to distinguish standards published by the International Electrotechnical Commission numerically from other international standards, their number range was shifted in 1997 by adding 60000. So what used to be called IEC 27 is now… …   Wikipedia

  • List of DIN standards — This is an incomplete list of DIN standards. *The STATUS column gives the latest known status of the standard. **If a standard has been withdrawn and no replacement specification is listed, either the specification was withdrawn without… …   Wikipedia

  • List of EN standards — This is an incomplete list of European standards maintained by CEN (European Committee for Standardization) and CENELEC (European Committee for Electrotechnical Standardization): EN 1 999 * EN 1: Flued oil stoves with vaporizing burners * EN 3:… …   Wikipedia

  • List of Ecma standards — This is a list of standards published by Ecma International, formerly the European Computer Manufacturers Association.* ECMA 6 7 bit coded character set (same as ISO/IEC 646/ITU T T.50) * ECMA 13 File Structure and Labelling of Magnetic Tapes… …   Wikipedia

  • List of GB standards — GB standards are the Chinese national standards issued by the Standardization Administration of China (SAC), the Chinese National Committee of the ISO and IEC. GB stands for Guobiao (zh stp|s=国标|t=國標|p=Guóbiāo), Chinese for national standard… …   Wikipedia

  • List of ISO romanizations — List of ISO standards for transliterations and transcriptions (or romanizations): *ISO 9 mdash; Cyrillic *ISO 233 mdash; Arabic *ISO 259 mdash; Hebrew *ISO 843 mdash; Greek *ISO 3602 mdash; Japanese *ISO 7098 mdash; Chinese *ISO 9984 mdash;… …   Wikipedia

  • List of ISO 639-2 codes — ISO 639 has five code lists. The following is a complete list of ISO 639 2 codes, including the corresponding ISO 639 1 codes where they exist. The codes are sorted by language name in the third column. The ISO 639 3 codes are not included.The… …   Wikipedia

  • List of ISO image software — The following is a list of software programs that can read and/or write ISO image files broken down by platform support and capability. Capability is defined as ability to create, mount, burn, and/or extract as follows: * Create, the ability to… …   Wikipedia

  • List of ISO 639-3 codes — The following is a complete overview of all 7,622 codes in the draft code table for ISO 639 3. A normative list of current ISO 639 3 identifiers is available for download from the ISO 639 3 Registration Authority Web site.… …   Wikipedia

  • ISO 15924 — ISO 15924, Codes for the representation of names of scripts, defines two sets of codes for a number of writing systems (scripts). Each script is given both a four letter code and a numeric one.[1] Script is defined as set of graphic characters… …   Wikipedia