Breeder reactor

Breeder reactor
Assembly of the core of Experimental Breeder Reactor I in Idaho, 1951

A breeder reactor is a nuclear reactor that generates more fissile material in fuel than it consumes.[1] These reactors are considered appealing due to their superior fuel economy: a normal reactor consumes less than 1% of the natural uranium that begins the fuel cycle, while a breeder can burn almost all of it (minus re-processing losses), also generating less waste for equal amounts of energy.[2] Breeders can be designed to use thorium, which is more abundant than uranium. Currently, there is renewed interest in both designs of breeders because of the increased price of natural uranium.

Fissile material is produced by neutron irradiation of fertile material, particularly uranium-238 and thorium-232. This happens to some extent in most reactors. Towards the end of its life, a uranium (not a mixed oxide fuel or MOX, just uranium) pressurized water reactor fuel element is producing more power from bred plutonium than from the remaining uranium-235. In a breeder reactor, fertile materials are deliberately provided, in the fuel and/or a breeder blanket surrounding the core. Historically, a machine specifically designed to create more fuel than it consumes is called a breeder.

Contents

Breeding ratio

One measure of a reactor's performance is the "breeding ratio" (the average number of fissile atoms created per fission event). Historically, attention has focused on reactors with low breeding ratios, from 1.01 for the Shippingport Reactor[3][4] running on thorium fuel and cooled by conventional light water to over 1.2 for the Russian BN-350 liquid-metal-cooled reactor.[5] Theoretical models of breeders with liquid sodium coolant flowing through tubes inside fuel elements ("tube-in-shell" construction) show breeding ratios of at least 1.8 are possible.[6] The breeding ratios of ordinary commercial non-breeders are lower than 1; however, industry trends are pushing breeding ratios steadily higher, blurring the distinction.[7]

Breeding versus burnup

All commercial reactors breed fuel, but they have low (though still significant) breeding ratios compared to machines traditionally considered "breeders." In recent years, the commercial power industry has been emphasizing high-burnup fuels, which last longer in the reactor core. As burnup increases, a higher percentage of the total power is due to the fuel bred in the reactor. At a burnup of 30 gigawatt-days per metric ton of uranium (GWd/MTU), about thirty percent of the total energy comes from bred plutonium. At 40 GWd/MTU, that increases to about forty percent. This corresponds to a breeding ratio of about 0.4 to 0.65.[8] Correspondingly, this effect extends the cycle life for such fuels to sometimes nearly twice what it would be otherwise. MOX fuel has a smaller breeding effect than U-235 fuel and is thus more challenging and slightly less economic to use due to a quicker drop off in reactivity through cycle life.

This is of interest largely because next-generation reactors such as the European Pressurized Reactor, AP1000 and ESBWR are designed to achieve very high burnup. This directly translates to higher breeding ratios. Current commercial power reactors have achieved breeding ratios of roughly 0.55, and next-generation designs like the AP1000 and EPR should have breeding ratios of 0.7 to 0.8, meaning that they produce 70 to 80 percent as much fuel as they consume, improving their fuel economy by roughly 15 percent points compared to current high-burnup reactors.[citation needed]

Breeding of fissile fuel is a common feature in reactors, but in commercial reactors not optimized for this feature it is referred to as "enhanced burnup". Up to a third of all electricity produced in the current US reactor fleet comes from bred fuel, and the industry is working steadily to increase that percentage as time goes on.

Types of breeder reactors

Two types of traditional breeder reactor have been proposed:

  • fast breeder reactor or FBR — The superior neutron economy of a fast neutron reactor makes it possible to build a reactor that, after its initial fuel charge of plutonium, requires only natural (or even depleted) uranium feedstock as input to its fuel cycle. This fuel cycle has been termed the plutonium economy.

In addition to this, there is some interest in so-called "reduced moderation reactors",[9] which are derived from conventional reactors and use conventional fuels and coolants, but are designed to be reasonably efficient as breeders. Such designs typically achieve breeding ratios of 0.7 to 1.01 or even higher.

Reprocessing

Actinides Half-life Fission products
244Cm 241Pu f 250Cf 243Cmf 10–30 y 137Cs 90Sr 85Kr
232 f 238Pu f is for
fissile
69–90 y 151Sm nc➔
4n 249Cf  f 242Amf 141–351 No fission product
has half-life 102
to 2×105 years
241Am 251Cf  f 431–898
240Pu 229Th 246Cm 243Am 5–7 ky
4n 245Cmf 250Cm 239Pu f 8–24 ky
233U    f 230Th 231Pa 32–160
4n+1 234U 4n+3 211–290 99Tc 126Sn 79Se
248Cm 242Pu 340–373 Long-lived fission products
237Np 4n+2 1–2 My 93Zr 135Cs nc➔
236U 4n+1 247Cmf 6–23 My 107Pd 129I
244Pu 80 My >7% >5% >1% >.1%
232Th 238U 235U    f 0.7–12 Ty fission product yield

Fission of the nuclear fuel in any reactor produces neutron-absorbing fission products, and because of this it is necessary to reprocess the fuel and breeder blanket from a breeder reactor if one is to fully utilise its ability to breed more fuel than it consumes. The most common reprocessing technique, PUREX, is generally considered a large proliferation concern because such reprocessing technologies can be used to extract weapons grade plutonium from a reactor operated on a short refuelling cycle. For this reason, the FBR closed fuel cycle is often seen as a greater proliferation concern than a once-through thermal fuel cycle.

However, to date all known weapons programs have used far more easily built thermal reactors to produce plutonium, and there are some designs such as the SSTAR which avoid proliferation risks by both producing low amounts of plutonium at any given time from the U-238, and by producing three different isotopes of plutonium (Pu-239, Pu-240, and Pu-242) making the plutonium used infeasible for atomic bomb use.

Furthermore, several countries are developing more proliferation resistant reprocessing methods that don't separate the plutonium from the other actinides. For instance, the pyrometallurgical process when used to reprocess fuel from the Integral Fast Reactor leaves large amounts of radioactive actinides in the reactor fuel. Removing these transuranics in a conventional reprocessing plant would be extremely difficult as many of the actinides emit strong neutron radiation, requiring all handling of the material to be done remotely, thus preventing the plutonium from being used for bombs while still being usable as reactor fuel.

Thorium fueled reactors may pose a slightly higher proliferation risk than uranium based reactors because, while Pu-239 will fairly often fail to undergo fission after neutron capture and produce Pu-240, the corresponding process in the thorium cycle is relatively rare. Thorium-232 converts to U-233, which will almost always undergo fission successfully, meaning that there will be very little U-234 produced in the reactor's thorium/U-233 breeder blanket, and the resulting pure U-233 will be comparatively easy to extract and use for weapons. However, the opposite process (neutron knock-off) happens as a matter of course, producing U-232, which has the strong gamma emitter Tl-208 in its decay chain. These gamma rays complicate the safe handling of a weapon and the design of its electronics; this explains why U-233 has never been pursued for weapons beyond proof-of-concept demonstrations.

Associated reactor types

One design of fast neutron reactor, specifically designed to address the waste disposal and plutonium issues, was the Integral Fast Reactor (also known as an Integral Fast Breeder Reactor, although the original reactor was designed to not breed a net surplus of fissile material).[10][11]

To solve the waste disposal problem, the IFR had an on-site electrowinning fuel reprocessing unit that recycled the uranium and all the transuranics (not just plutonium) via electroplating, leaving just short half-life fission products in the waste. Some of these fission products could later be separated for industrial or medical uses and the rest sent to a waste repository (where they would not have to be stored for anywhere near as long as wastes containing long half-life transuranics). It is thought that it would not be possible to divert fuel from this reactor to make bombs, as several of the transuranics spontaneously undergo fission so rapidly that any assembly would melt before it could be completed. The project was canceled in 1994, at the behest of then-United States Secretary of Energy Hazel O'Leary. Use of a breeder reactor assumes nuclear reprocessing of the breeder blanket at least, without which the concept is meaningless. In practice, all proposed breeder reactor programs involve reprocessing of the fuel elements as well. This is important due to nuclear weapons proliferation concerns, as any nation conducting reprocessing using the traditional aqueous-based PUREX family of reprocessing techniques could potentially divert plutonium towards weapons building. In practice, commercial plutonium from reactors with significant burnup would require sophisticated weapon designs, but the possibility must be considered. To address this concern, modified aqueous reprocessing systems, which add extra reagents, forcing minor actinide "impurities" such as curium and neptunium to commingle with the plutonium, have been proposed. Such impurities matter little in a fast spectrum reactor, but make weaponizing the plutonium extraordinarily difficult, such that even very sophisticated weapon designs are likely to fail to fire properly. Such systems as the TRUEX and SANEX are meant to address this.

Even more comprehensive are systems such as the Integral Fast Reactor (IFR) pyroprocessing system, which uses pools of molten cadmium and electrorefiners to reprocess metallic fuel directly on-site at the reactor.[12] Such systems not only commingle all the minor actinides with both uranium and plutonium, they are compact and self-contained, so that no plutonium-containing material ever needs to be transported away from the site of the breeder reactor. Breeder reactors incorporating such technology would most likely be designed with breeding ratios very close to 1.00, so that after an initial loading of enriched uranium and/or plutonium fuel, the reactor would then be refueled only with small deliveries of natural uranium metal. A quantity of natural uranium metal equivalent to a block about the size of a milk crate delivered once per month would be all the fuel such a 1 gigawatt reactor would need.[13] Such self-contained breeders are currently envisioned as the final self-contained and self-supporting ultimate goal of nuclear reactor designers.

The fast breeder reactor

Schematic diagram showing the difference between the Loop and Pool types of LMFBR.

As of 2006, all large-scale FBR power stations have been liquid metal fast breeder reactors (LMFBR) cooled by liquid sodium. These have been of one of two designs:[1]

  • Loop type, in which the primary coolant is circulated through primary heat exchangers outside the reactor tank (but inside the biological shield due to radioactive sodium-24 in the primary coolant)
  • Pool type, in which the primary heat exchangers and pumps are immersed in the reactor tank

All current fast reactor designs use liquid metal as the primary coolant, to transfer heat from the core to steam used to power the electricity generating turbines. FBRs have been built cooled by liquid metals other than sodium—some early FBRs used mercury, other experimental reactors have used a sodium-potassium alloy. Both have the advantage that they are liquids at room temperature, which is convenient for experimental rigs but less important for pilot or full scale power stations. Lead and lead-bismuth alloy have also been used. The relative merits of lead vs sodium are discussed here. Looking further ahead, three of the proposed generation IV reactor types are FBRs:

FBRs usually use a mixed oxide fuel core of up to 20% plutonium dioxide (PuO2) and at least 80% uranium dioxide (UO2). Another fuel option is metal alloys, typically a blend of uranium, plutonium, and zirconium (used because it is "transparent" to neutrons). Enriched uranium can also be used on its own.

In many designs, the core is surrounded in a blanket of tubes containing non-fissile uranium-238 which, by capturing fast neutrons from the reaction in the core, is converted to fissile plutonium-239 (as is some of the uranium in the core), which is then reprocessed and used as nuclear fuel. Other FBR designs rely on the geometry of the fuel itself (which also contains uranium-238), arranged to attain sufficient fast neutron capture. The plutonium-239 (or the fissile uranium-235) fission cross-section is much smaller in a fast spectrum than in a thermal spectrum, as is the ratio between the 239Pu/235U fission cross-section and the 238U absorption cross-section. This increases the concentration of 239Pu/235U needed to sustain a chain reaction, as well as the ratio of breeding to fission.

On the other hand, a fast reactor needs no moderator to slow down the neutrons at all, taking advantage of the fast neutrons producing a greater number of neutrons per fission than slow neutrons. For this reason ordinary liquid water, being a moderator as well as a neutron absorber, is an undesirable primary coolant for fast reactors. Because large amounts of water in the core are required to cool the reactor, the yield of neutrons and therefore breeding of 239Pu are strongly affected. Theoretical work has been done on reduced moderation water reactors, which may have a sufficiently fast spectrum to provide a breeding ratio slightly over 1. This would likely result in an unacceptable power derating and high costs in an liquid-water cooled reactor, but the supercritical water coolant of the SCWR has sufficient heat capacity to allow adequate cooling with less water, making a fast-spectrum water cooled reactor a practical possibility. In addition, a heavy water moderated thermal breeder reactor, using thorium to produce uranium-233, is also possible (see Advanced Heavy Water Reactor).

Several prototype FBRs have been built, ranging in electrical output from a few light bulbs' equivalent (EBR-I, 1951) to over 1000 MWe. As of 2006, the technology is not economically competitive to thermal reactor technology—but India, Japan, China, Korea[clarification needed] and Russia are all committing substantial research funds to further development of Fast Breeder reactors, anticipating that rising uranium prices will change this in the long term. Germany, in contrast, abandoned the technology due to political and safety concerns. The SNR-300 fast breeder reactor was finished after 19 years despite cost overruns summing up to a total of 3.6 billion Euros, only to then be abandoned.[14]

As well as their thermal breeder program, India is also developing FBR technology, using both uranium and thorium feedstocks.

The thermal breeder reactor

"The Advanced Heavy Water Reactor is one of the few proposed large-scale uses of thorium. As of 2006 only India is developing this technology. Indian interest is motivated by their substantial thorium reserves; almost a third of the world's thorium reserves are in India, which in contrast has less than 1% of the world's uranium. Their stated intention is to use both fast and thermal breeder reactors to supply both their own fuel and a surplus for non-breeding thermal power reactors. Total worldwide resources of thorium are roughly three times those of uranium, so in the extreme long term this technology may become of more general interest.

"The Liquid fluoride thorium reactor (LFTR) was also developed as a thermal breeder. Liquid-fluoride reactors have many attractive features, such as deep inherent safety (due to their strong negative temperature coefficient of reactivity and their ability to drain their liquid fuel into a passively-cooled and non-critical configuration) and ease of operation. They are particularly attractive as thermal breeders because they can isolate protactinium-233 (the intermediate breeding product of thorium) from neutron flux and allow it to decay to uranium-233, which can then be returned to the reactor. Typical solid-fueled reactors are not capable of accomplishing this step and thus U-234 is formed upon further neutron irradiation." [15]

Traveling wave reactor

A theoretical type of self-contained breeder reactor called a traveling wave reactor is proposed in a patent by Intellectual Ventures. Were it built, it would be fueled by natural uranium, depleted uranium or thorium and would be able to operate for many years without needing any refueling.[16]

Breeder reactor development and notable breeder reactors

FBRs have been built and operated in the USA, the UK, France, the former USSR, India and Japan.[1] [17] An experimental FBR in Germany was built but never operated. There are very few breeder reactors actually used for power generation, there are a few planned, and quite a few are being used for research related to the Generation IV reactor initiative. In many countries, nuclear power has been opposed politically and thus many breeder reactors have been shut down, or are planned to be shut down, with various justifications.

France

Superphénix, the biggest fast breeder reactor

France's first fast reactor, Rapsodie first achieved criticality in 1967. Built at Cadarache near Aix-en-Provence, Rapsodie was a loop-type reactor with a thermal output of 40MW and no electrical generation facilities, and closed in 1983. The plant was also a focus point of anti-nuclear political activity by the Green party and other groups. Right wing groups claim the plant was shut down for political reasons and not lack of power generation.

This was followed by the 233 MWe Phénix, grid connected since 1973, both as a power reactor and more importantly as the center of work on reprocessing of nuclear waste by transmutation. It was definitely shut down in 2009.[18] The life-time load factor was just below 40 per cent, according to the IAEA data base PRIS.[19][20][21][22]

Superphénix, 1200 MWe, entered service in 1984 and as of 2006 remains the largest FBR yet built. It was shut down in 1998[23] due to political commitment of the left-wing government to competitive market forces. The power plant had not produced electricity for most of the preceding ten years. The life time load factor was 7.79 percent according to IAEA.[19]

Germany

Germany has built two FBRs.

KNK-II as a Research reactor was converted from a thermal reactor, KNK-I, which had been used to study sodium cooling. KNK-II first achieved criticality as a fast reactor in 1977, and produced 20MWe.[24] It was shut down in 1991 and is being dismantled[25]

Construction of the 300MWe SNR-300 at Kalkar in North Rhine-Westphalia was completed in 1985 but never operated. The price had exploded from 0.5 billion DM to 7.1 billion DM, the Three Mile Island accident had heightened public opposition to nuclear power, and the expected increase in electricity consumption had not occurred. The plant was maintained and staffed until a decision to close it was finally made in 1991, and has since been decommissioned. Today it houses an amusement park (Wunderland Kalkar).

India

India has an active development programme featuring both fast and thermal breeder reactors.

India’s first 40 MWt Fast Breeder Test Reactor (FBTR) attained criticality on 18 October 1985. Thus, India became the sixth nation to have the technology to build and operate an FBTR after US, UK, France, Japan and the former USSR. India has developed the technology to produce the plutonium rich U-Pu mixed carbide fuel. This can be used in the Fast Breeder Reactor.[26]

At present the scientists of the Indira Gandhi Centre for Atomic Research (IGCAR), one of the nuclear R & D institutions of India, are engaged in the construction (already in its final stages) of another FBR — the 500 MWe prototype fast breeder reactor - at Kalpakkam, near Chennai,[27] with plans to build more as part of its three stage nuclear power program.

India has the capability to use thorium cycle based processes to extract nuclear fuel. This is of special significance to the Indian nuclear power generation strategy as India has among the world largest reserves of thorium, which could fuel nuclear projects for an estimated 2,500 years.[citation needed] The higher construction expense of the Fast Breeder Reactor in comparison with the Pressurised Heavy Water Reactors (PHWR) in use is one of the main reasons why India is looking at the cheaper option — uranium fuel.

Japan

Japan has built one demonstration FBR, Monju, in Tsuruga, Fukui Prefecture, adding on to the research base developed by its older research FBR, the Joyo reactor. Monju is a sodium-cooled, MOX-fueled loop type reactor with 3 primary coolant loops, producing 714 MWt / 280 MWe.

Monju began construction in 1985 and was completed in 1991. It first achieved criticality on 5 April 1994. It was closed in December 1995 following a sodium leak and fire in a secondary cooling circuit, and was expected to restart in 2008. The reactor was restarted for tests in May 2010, for the goal to production usage in 2013.[28] However, on August 26, 2010, a 3.3-tonne "In‐Vessel Transfer Machine" fell into the reactor vessel when being removed after a scheduled fuel replacement operation.[29] The fallen device was not retrieved from the reactor vessel until June 23, 2011.[30]

In April 2007, the Japanese Government selected Mitsubishi Heavy Industries as the "core company in FBR development in Japan". Shortly thereafter, MHI started a new company, Mitsubishi FBR Systems (MFBR), with the explicit purpose of developing and eventually selling FBR technology.[31]

UK

The UK fast reactor programme was conducted at Dounreay, Scotland, from 1957 until the programme was cancelled in 1994. Three reactors were constructed, two of them fast neutron power reactors, and the third, DMTR, being a heavy water moderated research reactor used to test materials for the program. Fabrication and reprocessing facilities for fuel for the two fast reactors and for the test rigs for DMTR were also constructed onsite. Dounreay Fast Reactor (DFR) achieved its first criticality in 1959. It used NaK coolant and produced 14MW of electricity. This was followed by the sodium-cooled 250 MWe Prototype Fast Reactor (PFR) in the 1970s. PFR was closed down in 1994 as the British government withdrew major financial support for nuclear energy development, DFR and DMTR both having previously been closed.

USA

On December 20, 1951, the fast reactor EBR-I (Experimental Breeder Reactor-1) at the Idaho National Laboratory in Idaho Falls, Idaho produced enough electricity to power four light bulbs, and the next day produced enough power to run the entire EBR-I building. This was a milestone in the development of nuclear power reactors.[32][33] The reactor was decommissioned in 1964.

The next generation experimental breeder was EBR-II (Experimental Breeder Reactor-2), which went into service at the INEEL in 1964 and operated until 1994. It was designed to be an "integral" nuclear plant, equipped to handle fuel recycling onsite. It typically operated at 20 megawatts out of its 62.5 megawatt maximum design power, and provided the bulk of heat and electricity to the surrounding facilities.[34]

The world's first commercial LMFBR, and the only one yet built in the USA, was the 94 MWe Unit 1 at Enrico Fermi Nuclear Generating Station. Designed in a joint effort between Dow Chemical and Detroit Edison as part of the Atomic Power Development Associates consortium, groundbreaking in Lagoona Beach, Michigan (near Monroe, Michigan) took place in 1956. The plant went into operation in 1963. It shut down on October 5, 1966 due to high temperatures caused by a loose piece of zirconium which was blocking the molten sodium coolant nozzles. Partial melting damage to six subassemblies within the core was eventually found. (This incident was the basis for a controversial book by investigative reporter John G. Fuller titled We Almost Lost Detroit.) The zirconium blockage was removed in April 1968, and the plant was ready to resume operation by May 1970, but a sodium coolant fire delayed its restart until July. It subsequently ran until August 1972 when its operating license renewal was denied.

The Clinch River Breeder Reactor Project was announced in January, 1972. A government/business cooperative effort, construction proceeded fitfully and abandoned in 1982 because the US has since halted its spent-fuel reprocessing program and thus made breeders pointless.[35] Funding for this project was halted by Congress on October 26, 1983.

The Fast Flux Test Facility, first critical in 1980, is not a breeder but is a sodium-cooled fast reactor. It is in cold standby.

USSR

The Soviet Union constructed a series of fast reactors, the first being mercury cooled and fueled with plutonium metal, and the later plants sodium cooled and fueled with plutonium oxide.

BR-1 (1955) was 100W (thermal) was followed by BR-2 at 100 kW and then the 5MW BR-5.

BOR-60 (first criticality 1969) was 60 MW, with construction started in 1965.

BN-350 (1973) was the first full-scale Soviet FBR. Constructed on the Mangyshlak Peninsula in Kazakhstan and on the shore of the Caspian Sea, it supplied 130MW of electricity plus 80,000 tonnes per day of desalinated fresh water to the city of Aktau. Its total output was regarded as the equivalent of 350MWe, hence the designation.

BN-600 (1986, end of life 2020) is 1470MWth / 600MWe.[36][37]

There are plans for the construction of two larger plants, BN-800 (800 MWe) at Beloyarsk, expected to be completed in Q1/2013, and BN-1200 (1200 MWe), expected to be completed in 2018.

Future plants

As of 2003 one indigenous FBR was planned for India, which is due to be completed by 2010.[17] The FBR program of India includes the concept of using fertile thorium-232 to breed fissile uranium-233. India is also pursuing the thermal breeder reactor, again using thorium. A thermal breeder is not possible with purely uranium/plutonium based technology. Thorium fuel is the strategic direction of the power program of India, owing to their large reserves of thorium, but worldwide known reserves of thorium are also some four times those of uranium. India's Department of Atomic Energy (DAE) says that it will simultaneously construct four more breeder reactors of 500 MWe each including two at Kalpakkam.[38]

The China Experimental Fast Reactor (CEFR), scheduled for completion in 2008, is a 25 MW(e) prototype for the planned China Prototype Fast Reactor (CFRP).[39] It started generating power on July 21, 2011.[40]

The People’s Republic of China has also initiated a research and development project in thorium molten-salt thermal breeder reactor technology (Liquid fluoride thorium reactor). It was formally announced at the Chinese Academy of Sciences (CAS) annual conference in January 2011. Its ultimate target is to investigate and develop a thorium based molten salt nuclear system in about 20 years.[41] [42]

Kirk Sorensen, former NASA scientist and Chief Nuclear Technologist at Teledyne Brown Engineering, has been a long time promoter of thorium fuel cycle and particularly liquid fluoride thorium reactors. In 2011, Sorensen founded Flibe Energy, a company aimed to develop 20-50 MW LFTR reactor designs to power military bases.[43] [44] [45] [46]

South Korea is developing a design for a standardized modular FBR for export, to complement the standardized PWR (Pressurized Water Reactor) and CANDU designs they have already developed and built, but has not yet committed to building a prototype.

The BN-600 (Beloyarsk NNP in the town of Zarechny, Sverdlovsk Oblast) is still operational. A second reactor (BN-800) is scheduled to be constructed before 2015.[47]

On 16 February 2006 the U.S., France and Japan signed an "arrangement" to research and develop sodium-cooled fast reactors in support of the Global Nuclear Energy Partnership.[48]

See also

References

  1. ^ a b c Waltar, A.E.; Reynolds, A.B (1981). Fast breeder reactors. New York: Pergamon Press. pp. 853. ISBN 9780080259833. http://books.google.com/books?id=4m6o1jMcIIIC. 
  2. ^ [1]
  3. ^ Adams, R. (1995). Light Water Breeder Reactor, Atomic Energy Insights 1.
  4. ^ Kasten, P.R. (1998) Review of the Radkowsky Thorium Reactor Concept. (PDF) Science & Global Security 7, 237–269.
  5. ^ Fast Breeder Reactors, Department of Physics & Astronomy, Georgia State University. Retrieved 16 October 2007.
  6. ^ Hiraoka, T., Sako, K., Takano, H., Ishii, T. and Sato, M. (1991). A high-breeding fast reactor with fission product gas purge/tube-in-shell metallic fuel assemblies. Nuclear Technology 93, 305–329.
  7. ^ Matthews, B. (1996). Division Director Discusses Plutonium Future part 1. The Actinide Research Quarterly Spring, 6–7.
  8. ^ "Information Papers: Plutonium". World Nuclear Association (WNA). April 2008. http://world-nuclear.org/info/inf15.html. Retrieved 2008-06-24. 
  9. ^ Yamashita, J., Kawamura, F. and Mochida, T. (2004). Next-generation Nuclear Reactor Systems for Future Energy. (PDF) Hitachi Review 53, 131–135.
  10. ^ http://www.nuc.berkeley.edu/designs/ifr/
  11. ^ National Policy Analysis #378: Integral Fast Reactors: Source of Safe, Abundant, Non-Polluting Power - December 2001
  12. ^ Hannum, W.H., Marsh, G.E. and Stanford, G.S. (2004). PUREX and PYRO are not the same. Physics and Society July.
  13. ^ University of Washington (2004). Energy Numbers: Energy in natural processes and human consumption, some numbers. Retrieved 16 October 2007.
  14. ^ Werner Meyer-Larsen: Der Koloß von Kalkar. Der Spiegel 43/1981 vom 19.10.1981, S. 42-55. [[[:Template:Der Spiegel]]] (German)
  15. ^ http://www.3rd1000.com/nuclear/nuke101g.htm
  16. ^ "TR10: Traveling Wave Reactor". Technology Review. 2009-03. http://www.technologyreview.com/energy/22114/. Retrieved 2009-03-06. 
  17. ^ a b "India's first fast breeder reactor to be ready next year". The Times Of India. http://timesofindia.indiatimes.com/Indias_first_fast_breeder_nuke_reactor_to_be_ready_next_year/articleshow/4060057.cms?TOI_latestnews. 
  18. ^ http://www.cea.fr/le_cea/actualites/arret_definitif_du_reacteur_phenix-22415
  19. ^ a b http://www.iaea.org/programmes/a2/
  20. ^ "Schneller Brüter "Phoenix" wird endgültig stillgelegt". http://www.weltderphysik.de/de/4293.php?ni=1592. 
  21. ^ "Nuclear Power in France — October 2009". http://www.world-nuclear.org/info/inf40.html. 
  22. ^ "Mise à l’arrêt définitive du réacteur Phénix". http://www.cea.fr/le_cea/actualites/arret_definitif_du_reacteur_phenix-22415. 
  23. ^ "Nuke Database System". http://www.icjt.org/plants/uni/a/uni81a.html. 
  24. ^ KNK-II. Info pool/Glossary, European Nuclear Society, 2003
  25. ^ Forschungszentrum Karlsruhe: Das Projekt Rückbau der Kompakten Natriumgekühlten Kernreaktoranlage auf einen Blick
  26. ^ Srinivasan, G; Sureshkumar, K; Rajendran, B; Ramalingam, P (2006). "The Fast Breeder Test Reactor—Design and operating experiences". Nuclear Engineering and Design 236 (7–8): 796–811. doi:10.1016/j.nucengdes.2005.09.024. 
  27. ^ Chetal, S; Balasubramaniyan, V; Chellapandi, P; Mohanakrishnan, P; Puthiyavinayagam, P; Pillai, C; Raghupathy, S; Shanmugham, T et al. (2006). "The design of the Prototype Fast Breeder Reactor". Nuclear Engineering and Design 236 (7–8): 852–860. doi:10.1016/j.nucengdes.2005.09.025. 
  28. ^ http://search.japantimes.co.jp/cgi-bin/nn20100602b4.html
  29. ^ "高速増殖原型炉もんじゅ燃料交換片付け作業中における炉内中継装置の落下について(中間報告)" (in Japanese). Turuga Head Office, JAEA. 1 October 2010. http://www.jaea.go.jp/04/turuga/jturuga/press/2010/10/p101001-2.pdf. Retrieved 14 March 2011. 
  30. ^ Fallen device retrieved from Japan fast-breeder reactor June 23, 2011.
  31. ^ Nuclear Engineering International
  32. ^ Spinrad, B I (1978). "Alternative Breeder Reactor Technologies". Annual Review of Energy 3: 147–179. doi:10.1146/annurev.eg.03.110178.001051. 
  33. ^ Cochran, Thomas; Feiveson, Harold; Von Hippel, Frank (2009). "Fast Reactor Development in the United States". Science & Global Security 17 (2): 109–131. doi:10.1080/08929880903445514. http://www.rogerwitherspoon.com/docs/ipfmfastbreederreport%20-.pdf#page=99. 
  34. ^ Walters, L (1999). "Thirty years of fuels and materials information from EBR-II". Journal of Nuclear Materials 270: 39–48. doi:10.1016/S0022-3115(98)00760-0. 
  35. ^ http://www.pbs.org/wgbh/pages/frontline/shows/reaction/readings/keeny.html Plutonium Reprocessing: Twenty Years Experience (1977-1997) By Spurgeon M. Keeny, Jr.
  36. ^ "Beloyarsk Nuclear Power Plant". http://www.insc.anl.gov/neisb/neisb4/NEISB_3.2.A2.html. 
  37. ^ "Russian parliament and Kremlin party defends fast-breeder reactors". http://www.bellona.org/english_import_area/international/russia/npps/beloyarsk/35835. 
  38. ^ Home | India Defence
  39. ^ IAEA Fast Reactor Database
  40. ^ "China's experimental fast neutron reactor begins generating power". xinhuanet. July 2011. http://news.xinhuanet.com/english2010/china/2011-07/21/c_131000739.htm. Retrieved 2011-07-21. 
  41. ^ Xu Qimin (26 January 2011). "The future of nuclear power plant safety "are not picky eaters"" (in Chinese). http://whb.news365.com.cn/yw/201101/t20110126_2944856.htm. Retrieved 30 October 2011. "Yesterday, as the Chinese Academy of Sciences of the first to start one of the strategic leader in science and technology projects, "the future of advanced nuclear fission energy - nuclear energy, thorium-based molten salt reactor system" project was officially launched. The scientific goal is 20 years or so, developed a new generation of nuclear energy systems, all the technical level reached in the test and have all the intellectual property rights." 
  42. ^ Clark, Duncan. "China enters race to develop nuclear energy from thorium". Environment Blog. The Guardian (UK). http://www.guardian.co.uk/environment/blog/2011/feb/16/china-nuclear-thorium. Retrieved 30 October 2011. 
  43. ^ Flibe Energy
  44. ^ "Kirk Sorensen has started a Thorium Power company Flibe Energy". The Next Bi Future. 23 May 2011. http://nextbigfuture.com/2011/05/kirk-sorensen-has-started-thorium-power.html. Retrieved 30 October 2011. 
  45. ^ "Live chat: nuclear thorium technologist Kirk Sorensen". Environment Blog. The Guardian (UK). 7 September 2001. http://www.guardian.co.uk/environment/blog/2011/sep/07/live-web-chat-nuclear-kirk-sorensen. Retrieved 30 October 2011. 
  46. ^ Martin, William T. (27 September 2011). "New Huntsville company to build thorium-based nuclear reactors". Huntsville Newswire. http://www.huntsvillenewswire.com/2011/09/27/huntsville-company-build-thoriumbased-nuclear-reactors/. Retrieved 30 October 2011. 
  47. ^ Russian parliament and Kremlin party defends fast-breeder reactors - Bellona
  48. ^ Department of Energy - Generation IV International Forum Signs Agreement to Collaborate on Sodium Cooled Fast Reactors

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • breeder reactor — n. a nuclear reactor generating nuclear energy and creating additional fuel by producing more fissile material than it consumes * * *       nuclear reactor that produces more fissionable material than it consumes to generate energy. This special… …   Universalium

  • breeder reactor — n. a nuclear reactor generating nuclear energy and creating additional fuel by producing more fissile material than it consumes …   English World dictionary

  • Breeder reactor — См. Реактор размножитель Термины атомной энергетики. Концерн Росэнергоатом, 2010 …   Термины атомной энергетики

  • breeder reactor — dauginimo reaktorius statusas T sritis fizika atitikmenys: angl. breeder; breeder reactor vok. Brüter, m; Brutreaktor, m rus. бридерный реактор, m; реактор размножитель, m pranc. breeder, m; réacteur surconvertisseur, m; réacteur surrégénérateur …   Fizikos terminų žodynas

  • breeder reactor — dauginimo reaktorius statusas T sritis Energetika apibrėžtis Branduolinis reaktorius, kuriame branduolinis kuras virsta atgamintuoju branduoliniu kuru. Reaktoriuje branduolių (pvz., plutonio Pu²³⁹) dalijimosi metu laisvieji neutronai sąveikauja… …   Aiškinamasis šiluminės ir branduolinės technikos terminų žodynas

  • breeder reactor — noun a nuclear reactor that produces more fissile material than it burns • Hypernyms: ↑nuclear reactor, ↑reactor • Part Meronyms: ↑blanket …   Useful english dictionary

  • breeder reactor — noun see breeder …   New Collegiate Dictionary

  • Breeder reactor —   A reactor that both produces and consumes fissionable fuel, especially one that creates more fuel than it consumes. The new fissionable material is created by a process known as breeding, in which neutrons from fission are captured in fertile… …   Energy terms

  • Fast breeder reactor — The fast breeder or fast breeder reactor (FBR) is a fast neutron reactor designed to breed fuel by producing more fissile material than it consumes. The FBR is one possible type of breeder reactor. The reactors are used in nuclear power plants to …   Wikipedia

  • Clinch River Breeder Reactor Project — Architect s conception of the Clinch River Breeder Reactor The Clinch River Breeder Reactor (CRBRP) Project was a joint effort of the U.S. Atomic Energy Commission (and its successor agencies, the U.S. Energy Research and Development… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”