Aerodynamics

﻿
Aerodynamics

Aerodynamics is a branch of dynamics concerned with studying the motion of air, particularly when it interacts with a moving object. Aerodynamics is closely related to fluid dynamics and gas dynamics, with much theory shared between them. Aerodynamics is often used synonymously with gas dynamics, with the difference being that gas dynamics applies to all gases. Understanding the motion of air (often called a flow field) around an object enables the calculation of forces and moments acting on the object. Typical properties calculated for a flow field include velocity, pressure, density and temperature as a function of position and time. By defining a control volume around the flow field, equations for the conservation of mass, momentum, and energy can be defined and used to solve for the properties. The use of aerodynamics through mathematical analysis, empirical approximation and wind tunnel experimentation form the scientific basis for heavier-than-air flight.

Aerodynamic problems can be identified in a number of ways. The flow environment defines the first classification criterion. "External" aerodynamics is the study of flow around solid objects of various shapes. Evaluating the lift and drag on an airplane, the shock waves that form in front of the nose of a rocket or the flow of air over a hard drive head are examples of external aerodynamics. "Internal" aerodynamics is the study of flow through passages in solid objects. For instance, internal aerodynamics encompasses the study of the airflow through a jet engine or through an air conditioning pipe.

The ratio of the problem's characteristic flow speed to the speed of sound comprises a second classification of aerodynamic problems. A problem is called subsonic if all the speeds in the problem are less than the speed of sound, transonic if speeds both below and above the speed of sound are present (normally when the characteristic speed is approximately the speed of sound), supersonic when the characteristic flow speed is greater than the speed of sound, and hypersonic when the flow speed is much greater than the speed of sound. Aerodynamicists disagree over the precise definition of hypersonic flow; minimum Mach numbers for hypersonic flow range from 3 to 12.

The influence of viscosity in the flow dictates a third classification. Some problems involve only negligible viscous effects on the solution, in which case viscosity can be considered to be nonexistent. The approximations to these problems are called inviscid flows. Flows for which viscosity cannot be neglected are called viscous flows.

History

, very little effort was made to develop governing laws for understanding the nature of flight prior to the 17th century.

In 1505, Leonardo da Vinci wrote the "Codex on the Flight of Birds", one of the earliest treatises on aerodynamics. He notes for the first time that the center of gravity of a flying bird does not coincide with its center of pressure, and he describes the construction of an ornithopter, with flapping wings similar to a bird.

Sir Isaac Newton was the first person to develop a theory of air resistance, [cite book | author=Newton, I. | title=Philosophiae Naturalis Principia Mathematica, Book II | year=1726] making him one of the first aerodynamicist. As part of that theory, Newton believed that drag was due to the dimensions of a body, the density of the fluid, and the velocity raised to the second power. These beliefs all turned out to be correct for low flow speeds. Newton also developed a law for the drag force on a flat plate inclined towards the direction of the fluid flow. Using F for the drag force, ρ for the density, S for the area of the flat plate, V for the flow velocity, and θ for the inclination angle, his law is expressed below.

$F = ho SV^2sin^2left\left( heta ight\right)$

Unfortunately, this equation is completely incorrect for the calculation of drag (unless the flow speed is hypersonic). Drag on a flat plate is closer to being linear with the angle of inclination as opposed to acting quadratically. This formula can lead one to believe that flight is more difficult than it actually is, and it may have contributed to a delay in manned flight. [cite book | author=von Karman, Theodore | title=Aerodynamics: Selected Topics in the Light of Their Historical Development | publisher=Dover Publications | year=2004 | isbn=0486434850 | oclc=53900531]

s.

These empirical findings led to a variety of air resistance experiments on various shapes throughout the 18th and 19th centuries. Drag theories were developed by Jean le Rond d'Alembert, [cite book | author=d'Alembert, J. | title=Essai d'une nouvelle theorie de la resistance des fluides | year=1752] Gustav Kirchhoff, [cite book | author=Kirchhoff, G. | title=Zur Theorie freier Flussigkeitsstrahlen | publisher=Journal fur die reine und angewandte Mathematik (70), 289-298 | year=1869] and Lord Rayleigh. [cite book | author=Rayleigh, Lord | title=On the Resistance of Fluids | publisher=Philosophical Magazine (5)2, 430-441 | year=1876] Equations for fluid flow with friction were developed by Claude-Louis Navier [cite book | author=Navier, C. L. M. H. | title=Memoire sur les lois du mouvement des fluides | publisher=Memoires de l'Academie des Sciences (6), 389-416 | year=1823] and George Gabriel Stokes. [cite book | author=Stokes, G. | title=On the Theories of the Internal Friction of Fluids in Motion | publisher=Transaction of the Cambridge Philosophical Society (8), 287-305 | year=1845] To simulate fluid flow, many experiments involved immersing objects in streams of water or simply dropping them off the top of a tall building. Towards the end of this time period Gustave Eiffel used his Eiffel Tower to assist in the drop testing of flat plates.

Of course, a more precise way to measure resistance is to place an object within an artificial, uniform stream of air where the velocity is known. The first person to experiment in this fashion was Francis Herbert Wenham, who in doing so constructed the first wind tunnel in 1871. Wenham was also a member of the first professional organization dedicated to aeronautics, the Royal Aeronautical Society of Great Britain. Objects placed in wind tunnel models are almost always smaller than in practice, so a method was needed to relate small scale models to their real-life counterparts. This was achieved with the invention of the dimensionless Reynolds number by Osbourne Reynolds. [cite book | author=Reynolds, O. | title=An Experimental Investigation of the Circumstances which Determine whether the Motion of Water Shall Be Direct or Sinuous and of the Law of Resistance in Parallel Channels | publisher=Philosophical Transactions of the Royal Society of London A-174, 935-982 | year=1883] Reynolds also experimented with laminar to turbulent flow transition in 1883.

By the late 19th century, two problems were identified before heavier-than-air flight could be realized. The first was the creation of low-drag, high-lift aerodynamic wings. The second problem was how to determine the power needed for sustained flight. During this time, the groundwork was laid down for modern day fluid dynamics and aerodynamics, with other less scientifically inclined enthusiasts testing various flying machines with little success.

, following the work of Sir George Cayley, was the first person to become highly successful with glider flights. Lilienthal believed that thin, curved airfoils would produce high lift and low drag.

Octave Chanute provided a great service to those interested in aerodynamics and flying machines by publishing a book outlining all of the research conducted around the world up to 1893. [cite book | author=Chanute, Octave| title=Progress in Flying Machines | publisher=Dover Publications | year=1997 | isbn=0486299813 | oclc=37782926] With the information contained in that book and the personal assistance of Chanute himself, the Wright brothers had just enough knowledge of aerodynamics to fly the first manned aircraft on December 17, 1903, just in time to beat the efforts of Samuel Pierpont Langley. The Wright brothers' flight confirmed or disproved a number of aerodynamics theories. Newton's drag force theory was finally proved incorrect. The first flight led to a more organized effort between aviators and scientists, leading the way to modern aerodynamics.

During the time of the first flights, Frederick W. Lanchester, [cite book | author=Lanchester, F. W. | title=Aerodynamics | year=1907] Martin Wilhelm Kutta, and Nikolai Zhukovsky independently created theories that connected circulation of a fluid flow to lift. Kutta and Zhukovsky went on to develop a two-dimensional wing theory. Expanding upon the work of Lanchester, Ludwig Prandtl is credited with developing the mathematics [cite book | author=Prandtl, L. | title=Tragflugeltheorie | publisher=Gottinger Nachrichten, mathematischphysikalische Klasse, 451-477 | year=1919] behind thin-airfoil and lifting-line theories as well as work with boundary layers. Prandtl, a professor at Gottingen University, instructed many students who would play important roles in the development of aerodynamics like Theodore von Kármán and Max Munk.

As aircraft began to travel faster, aerodynamicists realized that the density of air began to change as it came into contact with an object, leading to a division of fluid flow into the incompressible and compressible regimes. In compressible aerodynamics, density and pressure both change, which is the basis for calculating the speed of sound. Newton was the first to develop a mathematical model for calculating the speed of sound, but it was not correct until Pierre-Simon Laplace accounted for the molecular behavior of gases and introduced the heat capacity ratio. The ratio of the flow speed to the speed of sound was named the Mach number after Ernst Mach, who was one of the first to investigate the properties of supersonic flow which included Schlieren photography techniques to visualize the changes in density. William John Macquorn Rankine and Pierre Henri Hugoniot independently developed the theory for flow properties before and after a shock wave. Jakob Ackeret led the initial work on calculating the lift and drag on a supersonic airfoil. [cite book | author=Ackeret, J. | title=Luftkrafte auf Flugel, die mit der grosserer als Schallgeschwindigkeit bewegt werden | publisher=Zeitschrift fur Flugtechnik und Motorluftschiffahrt (16), 72-74 | year=1925] Theodore von Kármán and Hugh Latimer Dryden introduced the term transonic to describe flow speeds around Mach 1 where drag increases rapidly. Because of the increase in drag approaching Mach 1, aerodynamicists and aviators disagreed on whether manned supersonic flight was achievable.

aircraft twelve years later, thanks in part to those individuals.

By the time the sound barrier was broken, much of the subsonic and low supersonic aerodynamics knowledge had matured. The Cold War fueled an ever evolving line of high performance aircraft. Computational fluid dynamics was started as an effort to solve for flow properties around complex objects and has rapidly grown to the point where entire aircraft can be designed using a computer.

With some exceptions, the knowledge of hypersonic aerodynamics has matured between the 1960s and the present decade. Therefore, the goals of an aerodynamicist have shifted from understanding the behavior of fluid flow to understanding how to engineer a vehicle to interact appropriately with the fluid flow. For example, while the behavior of hypersonic flow is understood, building a scramjet aircraft to fly at hypersonic speeds has seen very limited success. Along with building a successful scramjet aircraft, the desire to improve the aerodynamic efficiency of current aircraft and propulsion systems will continue to fuel new research in aerodynamics.

Introductory terminology

*Lift
*Drag
*Reynolds number
*Mach number

Continuity assumption

Gases are composed of molecules which collide with one another and solid objects. If density and velocity are taken to be well-defined at infinitely small points, and are assumed to vary continuously from one point to another, the discrete molecular nature of a gas is ignored.

The continuity assumption becomes less valid as a gas becomes more rarefied. In these cases, statistical mechanics is a more valid method of solving the problem than aerodynamics.

Laws of Conservation

Aerodynamic problems are often solved using conservation laws as applied to a fluid continuum. In many basic problems, three conservation principles are used:
*Continuity: If a certain mass of fluid enters a volume, it must either exit the volume or change the mass inside the volume.
*Conservation of Momentum: Application of Newton's second law of motion to a continuum.
*Conservation of Energy: Although energy can be converted from one form to another, the total energy in a given system remains constant.

Incompressible aerodynamics

An incompressible flow is characterized by a constant density despite flowing over surfaces or inside ducts. A flow can be considered incompressible as long as its speed is low. For higher speeds, the flow will begin to compress as it comes into contact with surfaces. The Mach number is used to distinguish between incompressible and compressible flows.

ubsonic flow

Subsonic (or low-speed) aerodynamics is the study of inviscid, incompressible and irrotational aerodynamics where the differential equations used are a simplified version of the governing equations of fluid dynamics. [cite book
last=Katz
first=Joseph
title=Low-speed aerodynamics: From wing theory to panel methods
series=McGraw-Hill series in aeronautical and aerospace engineering
year=1991
publisher=McGraw-Hill
city=New York
isbn=0070504466
oclc=21593499
] . It is a special case of Subsonic aerodynamics.

In solving a subsonic problem, one decision to be made by the aerodynamicist is whether to incorporate the effects of compressibility. Compressibility is a description of the amount of change of density in the problem. When the effects of compressibility on the solution are small, the aerodynamicist may choose to assume that density is constant. The problem is then an incompressible low-speed aerodynamics problem. When the density is allowed to vary, the problem is called a compressible problem. In air, compressibility effects are usually ignored when the Mach number in the flow does not exceed 0.3 (about 335 feet per second or 228 miles per hour or 102 meters per second at 60oF). Above 0.3, the problem should be solved using compressible aerodynamics.

Compressible aerodynamics

According to the theory of aerodynamics, a flow is considered to be compressible if its change in density with respect to pressure is non-zero along a streamline. This means that - unlike incompressible flow - changes in density must be considered. In general, this is the case where the Mach number in part or all of the flow exceeds 0.3. The Mach .3 value is rather arbitrary, but it is used because gas flows with a Mach number below that value demonstrate changes in density with respect to the change in pressure of less than 5%. Furthermore, that maximum 5% density change occurs at the stagnation point of an object immersed in the gas flow and the density changes around the rest of the object will be significantly lower. Transonic, supersonic, and hypersonic flows are all compressible.

Transonic flow

The term Transonic refers to a range of velocities just below and above the local speed of sound (generally taken as Mach 0.8–1.2). It is defined as the range of speeds between the critical Mach number, when some parts of the airflow over an aircraft become supersonic, and a higher speed, typically near Mach 1.2, when all of the airflow is supersonic. Between these speeds some of the airflow is supersonic, and some is not.

upersonic flow

Supersonic aerodynamic problems are those involving flow speeds greater than the speed of sound. Calculating the lift on the Concorde during cruise can be an example of a supersonic aerodynamic problem.

Supersonic flow behaves very differently from subsonic flow. Fluids react to differences in pressure; pressure changes are how a fluid is "told" to respond to its environment. Therefore, since sound is in fact an infinitesimal pressure difference propagating through a fluid, the speed of sound in that fluid can be considered the fastest speed that "information" can travel in the flow. This difference most obviously manifests itself in the case of a fluid striking an object. In front of that object, the fluid builds up a stagnation pressure as impact with the object brings the moving fluid to rest. In fluid traveling at subsonic speed, this pressure disturbance can propagate upstream, changing the flow pattern ahead of the object and giving the impression that the fluid "knows" the object is there and is avoiding it. However, in a supersonic flow, the pressure disturbance cannot propagate upstream. Thus, when the fluid finally does strike the object, it is forced to change its properties -- temperature, density, pressure, and Mach number -- in an extremely violent and irreversible fashion called a shock wave. The presence of shock waves, along with the compressibility effects of high-velocity (see Reynolds number) fluids, is the central difference between supersonic and subsonic aerodynamics problems.

Hypersonic flow

In aerodynamics, hypersonic speeds are speeds that are highly supersonic. In the 1970s, the term generally came to refer to speeds of Mach 5 (5 times the speed of sound) and above. The hypersonic regime is a subset of the supersonic regime. Hypersonic flow is characterized by high temperature flow behind a shock wave, viscous interaction, and chemical dissociation of gas.

Associated terminology

The incompressible and compressible flow regimes produce many associated phenomena, such as boundary layers and turbulence.

Boundary layers

The concept of a boundary layer is important in many aerodynamic problems. The viscosity and fluid friction in the air is approximated as being significant only in this thin layer. This principle makes aerodynamics much more tractable mathematically.

Turbulence

In aerodynamics, turbulence is characterized by chaotic, stochastic property changes in the flow. This includes low momentum diffusion, high momentum convection, and rapid variation of pressure and velocity in space and time. Flow that is not turbulent is called laminar flow.

Aerodynamics in other fields

"'further|Automotive aerodynamicsAerodynamics is important in a number of applications other than aerospace engineering. "' It is a significant factor in any type of vehicle design, including automobiles. It is important in the prediction of forces and moments in sailing. It is used in the design of large components such as hard drive heads. Structural engineers also use aerodynamics, and particularly aeroelasticity, to calculate wind loads in the design of large buildings and bridges. Urban aerodynamics seeks to help town planners and designers improve comfort in outdoor spaces, create urban microclimates and reduce the effects of urban pollution. The field of environmental aerodynamics studies the ways atmospheric circulation and flight mechanics affect ecosystems. The aerodynamics of internal passages is important in heating/ventilation, gas piping, and in automotive engines where detailed flow patterns strongly affect the performance of the engine.

ee also

*List of aerospace engineering topics
*List of engineering topics
*Automotive aerodynamics
*Aeronautics
*Fluid dynamics
*Aerostatics
*Nose cone design
*Bernoulli's principle
*Navier-Stokes equations
*Center of pressure
*Computational Fluid Dynamics
* Transonic flows.
* Supersonic flows.
* Hypersonic flows.
*Sound barrier

References

General Aerodynamics
*
*
*
*

Subsonic Aerodynamics
*

Transonic Aerodynamics
*
*

Supersonic Aerodynamics
*
*
*
*
*
*

Hypersonic Aerodynamics
*
*

History of Aerodynamics
*
*
*

Aerodynamics Related to Engineering

"Ground Vehicles"
*
*

"Fixed-Wing Aircraft"
*
*
*

"Helicopters"
*
*
*

"Missiles"
*

"Model Aircraft"
*

Related Branches of Aerodynamics

"Aerothermodynamics"
*
*

"Aeroelasticity"
*
*

"Boundary Layers"
*
*

"Turbulence"
*
*

* [http://www.grc.nasa.gov/WWW/K-12/airplane/bga.html NASA Beginner's Guide to Aerodynamics]
* [http://www.aeromech.usyd.edu.au/aero/ Aerodynamics for Students]
* [http://www.desktopaero.com/appliedaero/preface/welcome.html Applied Aerodynamics: A Digital Textbook]
* [http://www.240edge.com/performance/tuning-aero.html Aerodynamics and Race Car Tuning]
* [http://www.aerodyndesign.com Aerodynamic Related Projects]
* [http://selair.selkirk.bc.ca/aerodynamics1/High-Speed/Page5.html Supersonic wing design]
* [http://www.efluids.com/efluids/pages/bicycle.htm eFluids Bicycle Aerodynamics]
* [http://www.forumula1.net/2006/f1/features/car-design-technology/aerodynamics/ Application of Aerodynamics in Formula One (F1)]
* [http://www.nas.nasa.gov/About/Education/Racecar/ Aerodynamics in Car Racing]
* [http://wings.avkids.com/Book/Animals/intermediate/birds-01.html Aerodynamics of Birds]
* [http://www.public.iastate.edu/~huhui/paper/2007/AIAA-2007-0483.pdf Aerodynamics and dragonfly wings]

Wikimedia Foundation. 2010.

Look at other dictionaries:

• Aerodynamics — aer o*dy*nam ics Aerodynamics A [ e]r*o*dy*nam ics, n. [A[ e]ro + dynamics: cf. F. a[ e]rodynamique.] The science which treats of the air and other gaseous bodies under the action of force, and of their mechanical effects. [1913 Webster] …   The Collaborative International Dictionary of English

• aerodynamics — aer o*dy*nam ics Aerodynamics A [ e]r*o*dy*nam ics, n. [A[ e]ro + dynamics: cf. F. a[ e]rodynamique.] The science which treats of the air and other gaseous bodies under the action of force, and of their mechanical effects. [1913 Webster] …   The Collaborative International Dictionary of English

• aerodynamics — (n.) 1837, from AERO (Cf. aero ) air + DYNAMICS (Cf. dynamics) …   Etymology dictionary

• aerodynamics — [er΄ō dī nam′iks] n. the branch of aeromechanics that deals with the forces (resistance, pressure, etc.) exerted by air or other gases in motion pl.n. the characteristics of the outer body of a vehicle, aircraft, etc., that affect the efficiency… …   English World dictionary

• aerodynamics — aerodynamic, aerodynamical, adj. aerodynamically, adv. /air oh duy nam iks/, n. (used with a sing. v.) the branch of mechanics that deals with the motion of air and other gases and with the effects of such motion on bodies in the medium. Cf.… …   Universalium

• aerodynamics — [[t]e͟əroʊdaɪnæ̱mɪks[/t]] N UNCOUNT (The form aerodynamic is used as a modifier. In British English, aerodynamics is sometimes used as a plural noun, with a plural verb.) Aerodynamics is the study of the way in which objects move through the air …   English dictionary

• aerodynamics — i. The science that deals with the motion of air and other gaseous fluids and of the forces acting on bodies when the bodies move through such fluids, or when such fluids move against or around the bodies. It also studies the qualities required… …   Aviation dictionary

• aerodynamics — /ˌɛəroʊdaɪˈnæmɪks / (say .airrohduy namiks) noun 1. the study of air in motion and of the forces acting on solids in motion relative to the air through which they move. Compare aerostatics (def. 1). 2. the properties of a solid object in relation …   Australian English dictionary

• aerodynamics — aerodinamika statusas T sritis fizika atitikmenys: angl. aerodynamics vok. Aerodynamik, f rus. аэродинамика, f pranc. aérodynamique, f …   Fizikos terminų žodynas

• aerodynamics — aerodinamika statusas T sritis Energetika apibrėžtis Aeromechanikos sritis, nagrinėjanti dujų (ir oro) judėjimą ir jėgas, veikiančias aptekamą kūną. Tai teorinis orlaivių, mentinių mašinų kūrimo pagrindas. Pagrindiniai šio mokslo klausimai yra… …   Aiškinamasis šiluminės ir branduolinės technikos terminų žodynas