TV aerial plug

TV aerial plug

Domestic antenna plugs and sockets are devices that connect the TV set to the TV antenna so that TV signals can flow to them.

Antenna plugs are male antenna connectors that fit into female antenna sockets.

Antenna sockets are female antenna connectors that have slots or holes which accept the pins or blades of antenna plugs inserted into them and deliver or receive TV signal to or from the plugs. Sockets are generally mounted on the TV set or in the wall. Sockets are usually designed to reject any plug which is not built to the same standard. Some sockets have one or more pins that connect to holes in the plug.

Belling-Lee

The Belling-Lee connector or IEC 169-2 connector, more often simply known as TV aerial plug or PAL connector, is the traditional European antenna connector for TV sets and FM-radio receivers. It is the oldest coaxial RF connector still commonly used today.Fact|date=April 2008 It connects a receiver to a terrestrial VHF/UHF roof antenna, antenna amplifier, or CATV network, via a coaxial cable.

It was invented at Belling & Lee Ltd in Enfield, England, around 1922, at the time of the first BBC broadcasts. It was originally only intended for medium frequency broadcasts, where accurate impedance matching of an antenna connector is not a concern.

Belling-Lee vs other connectors

Unlike the coaxial F connector used today for the same purpose in North America, the IEC 169-2 connector is "not" matched to the 75-ohm characteristic impedance of the antenna cable used. The lack of impedance matching causes signal reflections in the cable, leading to noticeable signal distortion on VHF and UHF frequencies (but not MW or Shortwave).
* The IEC-169-2 connector is recognized as a source of signal distortion and has become a particular concern with digital signal reception, specifically UHF HDTV.
* DAB (digital radio) and other reception modes are not as severely affected by the impedance matching issue, so only HDTV and satellite reception systems are forced to use the F connector.
* In spite of being somewhat unsuitable for modern analog VHF and UHF TV frequencies, due to industrial inertia, the Belling-Lee connector is still used today as a TV signal reception connector.
* In Europe and the Americas this connector is not used to connect satellite TV antennas. The more electrically suitable 75-ohm F connector is standard. However, the obsolete BSB receiver used a Belling-Lee connector for the LNB feed [http://www.whom.co.uk/grundig/bsb.htm] .

Miniature Belling Lee

There is also a Miniature Belling Lee connectorFact|date=February 2007 which was used for internal connections inside some equipment (including BBC RC5/3 Band II receiver and the STC AF101 Radio Telephone). It is not known who made them or any other name for the connector. It looks similar to a standard Belling Lee plug but is about half the size. The standard Belling Lee plug is about 33 mm long and 9.5 mm diameter (mating surface), the Miniature Belling Lee is about 17 mm long and 4.4 mm diameter.Amalgamated Wireless Australasia (AWA) used miniature Belling & Lee connectors, internally, in their 25M series Land Mobile two-way radios in the early 1970s. The socket is a Belling & Lee L1465/CS whilst the plug is a Belling & Lee 1465/PF.

See also

* RF connector
* Socket

References

*International Standard IEC 60169-2: Coaxial unmatched connector. (= British Standard BS 3041-2)

External links

* [http://www.megalithia.com/elect/bellinglee/ How to wire a Belling-Lee connector (TV aerial plug)] .


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • List of video connectors — This is a list of physical video connectors and related video signal standards. For other video related standards, please see the main article, video. Contents 1 By signal standard 2 Physical connectors 2.1 D subminiature family …   Wikipedia

  • Motorola connector — Typical Motorola plug found on consumer auto accessory antenna coaxial cables Type RF coaxial connector General specifications …   Wikipedia

  • RCA connector — A/V redirects here. For other uses, see audio visual. RCA connector RCA Plugs for composite video (yellow) and stereo audio (white and red) Type RF coaxial connect …   Wikipedia

  • D-subminiature — DA, DB, DC, DD, and DE sized connectors The D subminiature or D sub is a common type of electrical connector. They are named for their characteristic D shaped metal shield. When they were introduced, D subs were among the smaller connectors used… …   Wikipedia

  • Television set — [1] TV set redirects here. For other uses, see Television set (disambiguation) …   Wikipedia

  • Coaxial cable — RG 59 flexible coaxial cable composed of: A: outer plastic sheath B: woven copper shield C: inner dielectric insulator D: copper core Coaxial cable, or coax, has an inner conductor surrounded by a flexible, tubular insulating layer, surrounded by …   Wikipedia

  • List of IEC standards — In order to distinguish standards published by the International Electrotechnical Commission numerically from other international standards, their number range was shifted in 1997 by adding 60000. So what used to be called IEC 27 is now… …   Wikipedia

  • Musa connector — From left to right: assembled cable mounted Musa socket, socket components, two types of panel mounted plug The Musa connector (Multi User Steerable Array) is a type of coaxial connector, originally developed for the manual switching of radar… …   Wikipedia

  • MHV connector — The MHV (miniature high voltage) connector is a type of RF connector used for terminating coaxial cable. The connector looks almost identical to a typical BNC connector, but is not designed to mate with BNC jacks. MHV connectors can be recognized …   Wikipedia

  • RF connector — Male Type N RF connector. A coaxial RF connector is an electrical connector designed to work at radio frequencies in the multi megahertz range. RF connectors are typically used with coaxial cables and are designed to maintain the shielding that… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”