Metalorganic vapour phase epitaxy

Metalorganic vapour phase epitaxy

Metalorganic vapour phase epitaxy (MOVPE), also known as organometallic vapour phase epitaxy (OMVPE) or metalorganic chemical vapour deposition (MOCVD), is a chemical vapour deposition method of epitaxial growth of materials, especially compound semiconductors from the surface reaction of organic compounds or metalorganics and metal hydrides containing the required chemical elements. For example, indium phosphide could be grown in a reactor on a substrate by introducing Trimethylindium ((CH3)3In) and phosphine (PH3). Formation of the epitaxial layer occurs by final pyrolysis of the constituent chemicals at the substrate surface. In contrast to molecular beam epitaxy (MBE) the growth of crystals is by chemical reaction and not physical deposition. This takes place not in a vacuum, but from the gas phase at moderate pressures (2 to 100 kPa). As such, this technique is preferred for the formation of devices incorporating thermodynamically metastable alloys, and it has become a major process in the manufacture of optoelectronics.

MOCVDprocess.jpg

Contents

Reactor components

  • A reactor is a chamber made of a material that does not react with the chemicals being used. It must also withstand high temperatures. This chamber is composed by reactor walls, liner, a susceptor, gas injection units, and temperature control units. Usually, the reactor walls are made from stainless steel or quartz. To prevent over heating, cooling water must be flowing through the channels within the reactor walls. Ceramic or special glasses, such as quartz, are often used as the liner in the reactor chamber between the reactor wall and the susceptor. A substrate sits on a susceptor which is at a controlled temperature. The susceptor is made from a material resistant to the metalorganic compounds used; graphite is sometimes used. For growing nitrides and related materials, a special coating on the graphite susceptor is necessary to prevent corrosion by ammonia (NH3) gas.

GenericMOCVD.jpg

  • Gas inlet and switching system. Gas is introduced via devices known as 'bubblers'. In a bubbler a carrier gas (usually nitrogen or hydrogen) is bubbled through the metalorganic liquid, which picks up some metalorganic vapour and transports it to the reactor. The amount of metalorganic vapour transported depends on the rate of carrier gas flow and the bubbler temperature, and is usually controlled automatically and most accurately by using a Piezocon type vapour control system. Allowance must be made for saturated vapours.
  • Pressure maintenance system
  • Gas Exhaust and cleaning System. Toxic waste products must be converted to liquid or solid wastes for recycling (preferably) or disposal. Ideally processes will be designed to minimize the production of waste products.

Organometallic precursors

  • Germanium
    • Isobutylgermane (IBGe), Liquid
    • Dimethylamino germanium trichloride (DiMAGeC), Liquid
    • Tetramethylgermane (TMGe), Liquid
    • Tetraethylgermane (TEGe), Liquid
  • Phosphorus
    • Phosphine PH3, Gas
    • Tertiarybutyl phosphine (TBP), Liquid
    • Bisphosphinoethane (BPE), Liquid
  • Arsenic
    • Arsine AsH3, Gas
    • Tertiarybutyl arsine (TBAs), Liquid
    • Monoethyl arsine (MEAs), Liquid
    • Trimethyl arsine (TMAs), Liquid
  • Antimony
    • Trimethyl antimony (TMSb), Liquid
    • Triethyl antimony (TESb), Liquid
    • Tri-isopropyl antimony (TIPSb), Liquid
    • Stibine SbH3, Gas
  • Cadmium
    • Dimethyl cadmium (DMCd), Liquid
    • Diethyl cadmium (DECd), Liquid
    • Methyl Allyl Cadmium (MACd), Liquid
  • Selenium
    • Dimethyl selenide (DMSe), Liquid
    • Diethyl selenide (DESe), Liquid
    • Di-isopropyl selenide (DIPSe), Liquid

Semiconductors grown by MOVPE

III-V semiconductors

  • AlGaAs
  • AlGaInP
  • AlGaN
  • AlGaP
  • GaAsP
  • GaAs
  • GaN
  • GaP
  • InAlAs
  • InAlP
  • InSb
  • InGaN
  • GaInAlAs
  • GaInAlN
  • GaInAsN
  • GaInAsP
  • GaInAs
  • GaInP
  • InN
  • InP
  • InAs

II-VI semiconductors

IV Semiconductors

IV-V-VI Semiconductors


Environment, Health and Safety

As MOVPE has become well-established production technology, there are equally growing concerns associated with its bearing on personnel and community safety, environmental impact and maximum quantities of hazardous materials (such as gases and metalorganics) permissible in the device fabrication operations. The safety as well as responsible environmental care have become major factors of paramount importance in the MOVPE-based crystal growth of compound semiconductors.

See also


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Metalorganic chemical vapor deposition — (MOCVD) is a chemical vapor deposition process that uses metalorganic source gases. For instance, MOCVD may use tantalum ethoxide (Ta(OC 2H 5) 5), to create tantalum pentoxide (Ta 2O 5), or Tetrakis Dimethyl Amino Titanium(IV) (TDMAT) to create… …   Wikipedia

  • Compound semiconductor — A compound semiconductor is a semiconductor compound composed of elements from two or more different groups of the periodic table [1]. These semiconductors typically form in groups 13 16 (old groups III VI), for example of elements from group 13… …   Wikipedia

  • Metalorganics — For other uses, see Organometallic chemistry. Metalorganic compounds (jargon: metalorganics, metallo organics) are a class of chemical compounds that contain metals and organic ligands. Metalorganic compounds are used extensively in materials… …   Wikipedia

  • Coating — is a covering that is applied to the surface of an object, usually referred to as the substrate. In many cases coatings are applied to improve surface properties of the substrate, such as appearance, adhesion, wetability, corrosion resistance,… …   Wikipedia

  • List of coating techniques — This list contains an overview of coating techniques for thin film deposition, found in the field of materials science. The techniques can be classified as follows: Chemical vapor deposition (CVD) * Metalorganic vapour phase epitaxy *… …   Wikipedia

  • Gallium(III) arsenide — Chembox new Name = Gallium arsenide ImageFile = Gallium arsenide.jpg ImageFile1 = Gallium arsenide unit cell 3D balls.png IUPACName = Gallium arsenide Section1 = Chembox Identifiers CASNo = 1303 00 0 SMILES = Ga#As Section2 = Chembox Properties… …   Wikipedia

  • Solar cell — A solar cell made from a monocrystalline silicon wafer …   Wikipedia

  • Zinc oxide — Other names Zinc white Calamine Identifiers …   Wikipedia

  • Mercury telluride — Systematic name Mercury telluride …   Wikipedia

  • Multijunction photovoltaic cell — Multi junction solar cells or tandem cells are solar cells containing several p n junctions. Each junction is tuned to a different wavelength of light, reducing one of the largest inherent sources of losses, and thereby increasing efficiency.… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”