USS Barton (DD-722)

USS Barton (DD-722)
USS Barton (DD-722).jpg
USS Barton
Career (US)
Name: USS Barton
Namesake: John Kennedy Barton
Builder: Bath Iron Works
Laid down: 24 May 1943
Launched: 10 October 1943
Commissioned: 30 December 1943
Decommissioned: 30 September 1968
Struck: 1 October 1968
Fate: Sunk as target off Virginia, 8 October 1969
General characteristics
Class and type: Allen M. Sumner-class destroyer
Displacement: 2,200 long tons (2,200 t)
Length: 376 ft 6 in (114.76 m)
Beam: 40 ft (12 m)
Draft: 15 ft 8 in (4.78 m)
Installed power: 60,000 shp (45,000 kW)
Propulsion: 2 × steam turbines
2 × shafts
Speed: 34 kn (39 mph; 63 km/h)
Range: 6,500 nmi (7,500 mi; 12,000 km) @ 15 kn (17 mph; 28 km/h)
Complement: 336
Sensors and
processing systems:
Radar
Armament: 6 × 5 in (130 mm)/38 cal guns, 12 × 40 mm anti-aircraft guns, 11 × 20 mm anti-aircraft cannons, 10 × 21 in (530 mm) torpedo tubes (2x5), 6 × depth charge projectors, 2 × depth charge tracks

USS Barton (DD-722), an Allen M. Sumner-class destroyer, was the second ship of the United States Navy to be named for Rear Admiral John Kennedy Barton.

Contents

Construction

The second Barton (DD-722) was launched 10 October 1943 by Bath Iron Works Corp., Bath, Maine; sponsored by Ms. Barbara Dean Barton, granddaughter of Admiral Barton; and commissioned 30 December 1943, Commander J. W. Callahan in command.

World War II

On 14 May 1944, Barton departed Norfolk and arrived at Plymouth, England on the 27th. From 3-26, June she carried out screening, patrol, and bombardment duties in support of the invasion of Normandy. On 4 June, she rescued 31 American soldiers from the sinking LCT-2498. During a brisk engagement with German batteries in the Bombardment of Cherbourg on 25 June, Barton was slightly damaged while delivering effective gunfire support.

Returning to the U.S. on 10 July, Barton soon departed Norfolk for the Pacific, arriving at Pearl Harbor on 2 October. She then steamed westward to take part in the capture of Leyte, including the Ormoc landings (9 November – 8 December), Mindoro landings (12-18 December), Lingayen Gulf landings (4–21 January 1945); Iwo Jima invasion, including the 5th Fleet's supporting raids on Honshū and the Nansei Shoto (10-19 February, 25 February – 1 March); Okinawa invasion (21 March – 30 June), and the 3rd Fleet raids on Japan (10-24 July).

Post-War

After a brief tour with the occupation forces in Japan, Barton returned to Seattle on 6 October. She operated along the west coast until June 1946, when she departed Oakland for Bikini Atoll where she participated in Operation Crossroads (15 June – 10 August). Returning to the United States, she continued operations off the west coast until 22 January 1947, when she went out of commission in reserve at San Diego.

On 11 April 1949, Barton was recommissioned and joined Destroyer Division 201 (DesDiv 201). She operated with the Pacific Fleet until 11 July, when she got underway for Norfolk, arriving on 5 August. For the next three years, she operated along the eastern seaboard, made two cruises to the Caribbean: and one cruise with the 6th Fleet in the Mediterranean.

On 15 May 1952, Barton departed Norfolk via the Panama Canal for Korea, Commander Harvey B. Seim in command, arriving at Yokosuka, Japan on 18 June. She Joined Task Force 77 (TF 77) as a member of a hunter-killer group for operations along the east coast of Korea. On 10 August, while silencing enemy batteries on the island of Hodo Pando, Barton was hit on her number one stack by a 105 mm (4.1 in) shell from an enemy shore battery. Two men were wounded. Sailor Dale P. Gray, BM3, was killed. Repair party member MMFN Anthony Palm (Johnstown, PA) was dispatched to assess the extent of damage caused by the incoming round. His initial report of “. . . it’s a small hole, about 18” in diameter”, grossly underestimated the actual size of nearly 4 ½ feet. After a short repair period at Yokosuka (25-31 August), she returned to Korean waters.

While operating with TF 77, she was struck by a floating mine on 16 September, and had five men missing and seven wounded. The five sailors who died were Russell J. Graf, Harold J. Savoie, John M. Sherry, Walter E. Thierfelder, Jr., and black crew member, John L. Walton. Effective damage control by her crew enabled her to reach Sasebo for temporary repairs (29 September – 19 October) and then Norfolk, via the Suez Canal, for permanent repairs. She arrived at Norfolk on 12 December. Repairs completed on 15 August 1953, Barton spent the remainder of the year operating along the east coast and in the Caribbean.

On 4 January 1954, the destroyer headed for the Far East once again for another tour of duty with the 7th Fleet. After several months patrolling the waters between Okinawa and Taiwan and participating in hunter-killer exercises with Catfish, Barton steamed around the southern tip of Africa—making stops in Kenya, South Africa, Brazil, and Trinidad along the way. She moored in Norfolk on 10 August.

Barton began a schedule of training exercises and Atlantic Fleet maneuvers out of Norfolk, generally operating in the Virginia capes area and the West Indies. Following an overhaul in the Charleston Naval Shipyard in 1955, the destroyer rejoined the Atlantic Fleet for three months of hunter-killer anti-submarine warfare (ASW) training in preparation for a Mediterranean cruise.

On 28 July 1956, the destroyer departed Norfolk and entered the Mediterranean Sea on 7 August. After participating in NATO Exercise "Whipsaw", Barton and Soley steamed to Port Said, Egypt, to escort a convoy through the Suez Canal and into the Persian Gulf for a routine six-week patrol with the Middle East Force.

On 29 October, the two destroyers started south from the vicinity of Abadan, Iran, to leave the gulf, circumnavigate the Arabian Peninsula, and retransit the Suez Canal. Hostilities broke out that same day between Israel and Egypt over Egypt's premature nationalization of the canal. The war closed the canal, and subsequent international military action prompted Egypt to block it with sunken ships. Meanwhile, Barton and Soley anchored in Sitrah Harbor, Bahrein, and stood by in case a need arose to evacuate Americans from the region. Operating from Bahrein, Barton spent the next two months anchored at night and conducting tactical and gunnery drills by day. Finally, on 12 December, the destroyer received orders directing her around the Cape of Good Hope to Norfolk, where she tied up on 5 February 1957.

Following a period of upkeep, Barton prepared to put to sea on 14 March. She and William M. Wood received orders to escort the cruiser Canberra as she carried President Eisenhower to Bermuda to confer with British Prime Minister Harold Macmillan. Barton carried members of the press to the ceremony and stood sentry with William M. Wood at the entrance to the harbor. The destroyer then conducted ASW patrol and spent time in Norfolk in upkeep before going into drydock in Newport News for hull repairs. Barton exited Chesapeake Bay on 1 July and set out for yet another Mediterranean cruise. After several weeks of training operations with NATO forces and other units of the 6th Fleet, Barton anchored in Port Said on the night of 20 September. The following day, she and Soley transited the Suez Canal together once again and then headed to the Persian Gulf for a month of operations with the Iranian Navy. Upon relief by Laffey, the warship returned to the Mediterranean to participate in three more NATO exercises. She returned to Norfolk on 20 November.

For the next seven years, Barton alternated between training exercises out of Norfolk and assignments with the 6th Fleet. She made four Mediterranean deployments, eight visits to the West Indies, and one voyage to Halifax, Nova Scotia. The warship also qualified as a gunfire support ship in several exercises at Culebra and Bloodsworth Islands. On 5 February 1958, while steaming to Norfolk from the Caribbean, the destroyer received orders to assist a badly damaged Panamanian merchant ship, SS Elefterio. Barton's damage control parties could not contain the flooding caused by a large hole in Elefterio's hold, so she embarked the tanker's crew and passengers and transported them to Norfolk. In 1962, Barton covered the Project Mercury space shot carried out on 18 May in which Colonel John Glenn, USMC, became the first American to orbit the Earth. Late in October, she and the other units of the Atlantic Fleet stood to in order to support the warships engaged in the quarantine of Cuba called for by President John F. Kennedy in response to the siting of Soviet nuclear missiles in Cuba. Barton rehearsed with amphibious units at Onslow Beach, N.C., and stood by, ready for immediate action. The ship returned to Norfolk when the crisis ended. At the end of a Mediterranean deployment in August 1963, Barton and Borie made a goodwill tour of the Baltic Sea to support Vice President Lyndon B. Johnson's Scandinavian tour. The destroyers held "open ship" for general visiting at Copenhagen, Denmark, and Helsinki, Finland, before heading home on 10 September.

In April 1965, Barton received orders to join Reserve DesRon 30, and she became flagship of the squadron in its home port of Philadelphia. Her underway periods benefitted the reserve units that trained on board the destroyer, and also provided her nucleus crew with liberty visits to such ports as Fort Lauderdale, Port Everglades, West Palm Beach, and Miami, Fla.; Kingston, Jamaica; San Juan, P.R.; Freeport, Grand Bahamas; Bermuda; and Halifax, Nova Scotia. In July, Barton also steamed to Quebec and Montreal, and continued via the Saint Lawrence Seaway to Cleveland, Ohio, for a month of training combined with public awareness work about the Navy and its mission. During her remaining years in commission, Barton operated primarily between Philadelphia, Norfolk, and Guantanamo Bay.

Fate

In August 1968, a board of inspection and survey determined the destroyer to be beyond economical repair. Barton was decommissioned on 30 September 1968, and her name struck from the Naval Vessel Register on 1 October. She was sunk as a target on 8 October 1969.

Awards

Barton received six battle stars for World War II service and two for Korea.

References

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • USS Barton — USS Barton  название двух американских военных кораблей, названных в честь контр адмирала Джона Кеннеди Бартона. USS Barton (DD 599)  эсминец типа «Бенсон». USS Barton (DD 722)  эсминец типа «Аллен М. Самнер» …   Википедия

  • USS Almaack (AKA-10) — was an Almaack class attack cargo ship named after Almaack, a star system in the constellation Andromeda . She served as a commissioned ship for 4 years and 11 months. Laid down as the merchant ship Executor on 14 March 1940, under a Maritime… …   Wikipedia

  • USS Moale (DD-693) — The USS Moale (DD 693) was the second Allen M. Sumner class destroyer of the United States Navy. She was named for Lieutenant Edward Moale, Jr. (1866–1903), who performed heroic duty during the Spanish American War.The Moale was laid down 5… …   Wikipedia

  • USS Tolman (DM-28) — Career Builder: Bath Iron Works Laid down …   Wikipedia

  • USS Soley (DD-707) — Career (US) …   Wikipedia

  • USS Walke (DD-723) — For other ships of the same name, see USS Walke. Career (US) …   Wikipedia

  • Liste der Zerstörer der United States Navy — Schiffe der United States Navy A B C D E F …   Deutsch Wikipedia

  • List of World War II topics (U) — # U 571 (film) # U A # U boat Front Clasp # U boat War Badge # U Boote westwärts # U Man # U.S. British Staff Conference (ABC 1) # U.S. 20th Air Base Group # U.S. 5th Interceptor Command # U.S. Army Forces Far East # U.S. Army Forces in the… …   Wikipedia

  • Список эскадренных миноносцев США по типам — …   Википедия

  • Bath Iron Works — (BIW) is a shipyard located on the Kennebec River in Bath, Maine. Since its foundation in 1884 by Thomas W. Hyde, Bath Iron Works has built private, commercial and military vessels. Its largest customer has historically been the United States… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”