Failure analysis


Failure analysis

Failure analysis is the process of collecting and analyzing data to determine the cause of a failure. It is an important discipline in many branches of manufacturing industry, such as the electronics industry, where it is a vital tool used in the development of new products and for the improvement of existing products. It relies on collecting failed components for subsequent examination of the cause or causes of failure using a wide array of methods, especially microscopy and spectroscopy. The NDT or nondestructive testing methods are valuable because the failed products are unaffected by analysis, so inspection always starts using these methods.

Contents

Forensic investigation

Forensic inquiry into the failed process or product is the starting point of failure analysis. Such inquiry is conducted using scientific analytical methods such as electrical and mechanical measurements, or by analysing failure data such as product reject reports or examples of previous failures of the same kind. The methods of forensic engineering are especially valuable in tracing product defects and flaws. They may include fatigue cracks, brittle cracks produced by stress corrosion cracking or environmental stress cracking for example. Witness statements can be valuable for reconstructing the likely sequence of events and hence the chain of cause and effect. Human factors can also be assessed when the cause of the failure is determined. There are several useful methods to prevent product failures occurring in the first place, including failure mode and effects analysis (FMEA) and fault tree analysis (FTA), methods which can be used during prototyping to analyse failures before a product is marketed.

Failure theories can only be constructed on such data, but when corrective action is needed quickly, the precautionary principle demands that measures be put in place. In aircraft accidents for example, all planes of the type involved can be grounded immediately pending the outcome of the inquiry.

Another aspect of failure analysis is associated with No Fault Found (NFF) which is a term used in the field of failure analysis to describe a situation where an originally reported mode of failure can't be duplicated by the evaluating technician and therefore the potential defect can't be fixed.

NFF can be attributed to oxidation, defective connections of electrical components, temporary shorts or opens in the circuits, software bugs, temporary environmental factors, but also to the operator error. Large number of devices that are reported as NFF during the first troubleshooting session often return to the failure analysis lab with the same NFF symptoms or a permanent mode of failure.

The term Failure analysis also applies to other fields such as business management and military strategy.

Failure analysis engineers

A failure analysis engineer often plays a lead role in the analysis of failures, whether a component or product fails in service or if failure occurs in manufacturing or during production processing. In any case, one must determine the cause of failure to prevent future occurrence, and/or to improve the performance of the device, component or structure.

Methods of analysis

The failure analysis of many different products involves the use of the following tools and techniques:

Microscopes

Sample Preparation

Spectroscopic Analysis

Device Modification

Surface Analysis

Scanning Electron Microscopy

Laser Signal Injection Microscopy (LSIM)

Semiconductor Probing

Software Based Fault Location Techniques

See also

References

Further reading

  • Martin, Perry L., Electronic Failure Analysis Handbook, McGraw-Hill Professional; 1st edition (February 28, 1999) ISBN 978-0-07-041044-2.
  • Microelectronics Failure Analysis, ASM International; Fifth Edition (2004) ISBN 978-0-87170-804-5

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Metallurgical failure analysis — is the process by which a metallurgist determines the mechanism that has caused a metal component to fail. Typical failure modes involve various types of corrosion and mechanical damage. It has been estimated that the direct annual cost of… …   Wikipedia

  • Predictive Failure Analysis — (PFA) is a proprietary IBM technology for monitoring the likelihood of hard disk drives to fail. It was introduced in 1992 in IBM 0662 S1x drive (1052 MB Fast Wide SCSI 2 disk at 5400 rpm), and was industry s first such technology.The technology… …   Wikipedia

  • Failure causes — are defects in design, process, quality, or part application, which are the underlying cause of a failure or which initiate a process which leads to failure. Where failure depends on the user of the product or process, then human error must be… …   Wikipedia

  • Failure — For other uses, see Failure (disambiguation). Fail redirects here. For the Irish Republican Party, see Fianna Fáil …   Wikipedia

  • Failure rate — is the frequency with which an engineered system or component fails, expressed for example in failures per hour. It is often denoted by the Greek letter λ (lambda) and is important in reliability engineering. The failure rate of a system usually… …   Wikipedia

  • Failure in the intelligence cycle — or intelligence failure, while never defined in texts, can be understood to be the outcome of the inadequacies within the intelligence cycle. The intelligence cycle itself consists of six steps that are constantly in motion. The six steps are:… …   Wikipedia

  • Failure Mode, Effects, and Criticality Analysis — (FMECA) is an extension of Failure Mode and Effects Analysis (FMEA). In addition to the basic FMEA, it includes a criticality analysis, which is used to chart the probability of failure modes against the severity of their consequences. The result …   Wikipedia

  • Analysis of clinical trials — Failure to include all participants in the analysis may bias the trial results. Most trials do not yield perfect data, however. Protocol violations may occur, such as when the patients do not receive the full intervention or the correct… …   Wikipedia

  • Failure mode and effects analysis — A failure modes and effects analysis (FMEA) is a procedure for analysis of potential failure modes within a system for classification by severity or determination of the effect of failures on the system. It is widely used in manufacturing… …   Wikipedia

  • Failure Mode and Effects Analysis — FMEA (Failure Mode and Effects Analysis oder auch deutsch: Fehlermöglichkeits und Einflussanalyse oder kurz Auswirkungsanalyse) sowie FMECA (Failure Mode and Effects and Criticality Analysis) sind analytische Methoden der Zuverlässigkeitstechnik …   Deutsch Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.