Quantum cascade laser


Quantum cascade laser

Quantum cascade lasers (QCLs) are semiconductor lasers that emit in the mid- to far-infrared portion of the electromagnetic spectrum and were first demonstrated by Jerome Faist, Federico Capasso, Deborah Sivco, Carlo Sirtori, Albert Hutchinson, and Alfred Cho at Bell Laboratories in 1994. [cite journal |quotes= |last= Faist|first= Jerome|authorlink= |coauthors= Federico Capasso, Deborah L. Sivco, Carlo Sirtori, Albert L. Hutchinson, and Alfred Y. Cho|year= 1994|month= April|title= Quantum Cascade Laser|journal=Science|volume=264|issue=5158|pages=553–556|doi=10.1126/science.264.5158.553|url=http://www.sciencemag.org/cgi/content/abstract/264/5158/553|accessdate=2007-02-18|format= abstract|pmid= 17732739]

Unlike typical interband semiconductor lasers that emit electromagnetic radiation through the recombination of electron–hole pairs across the material band gap, QCLs are unipolar and laser emission is achieved through the use of intersubband transitions in a repeated stack of semiconductor superlattices, an idea first proposed in the paper "Possibility of amplification of electromagnetic waves in a semiconductor with a superlattice" by R.F. Kazarinov and R.A. Suris in 1971. [cite journal|quotes= |last= Kazarinov|first= R.F|authorlink= |coauthors= Suris, R.A.|year= 1971|month= April|title= Possibility of amplification of electromagnetic waves in a semiconductor with a superlattice|journal= Fizika i Tekhnika Poluprovodnikov|volume=5|issue=4|pages=797–800|id= |url= ]

Intersubband vs. interband transitions

Within a bulk semiconductor crystal, electrons may occupy states in one of two continuous energy bands - the valence band, which is heavily populated with low energy electrons and the conduction band, which is sparsely populated with high energy electrons. The two energy bands are separated by an energy band gap in which there are no permitted states available for electrons to occupy. Conventional semiconductor laser diodes generate light by a single photon being emitted when a high energy electron in conduction band recombines with a hole in the valence band. The energy of the photon and hence the emission wavelength of laser diodes is therefore determined by the band gap of the material system used.

A QCL however does not use bulk semiconductor materials in its optically active region. Instead it comprises a periodic series of thin layers of varying material composition forming a superlattice. The superlattice introduces a varying electric potential across the length of the device, meaning that there is a varying probability of electrons occupying different positions over the length of the device. This is referred to as one-dimensional multiple quantum well confinement and leads to the splitting of the band of permitted energies into a number of discrete electronic subbands. By suitable design of the layer thicknesses it is possible to engineer a population inversion between two subbands in the system which is required in order to achieve laser emission. Since the position of the energy levels in the system is primarily determined by the layer thicknesses and not the material, it is possible to tune the emission wavelength of QCLs over a wide range in the same material system.

Additionally, in semiconductor laser diodes, electrons and holes are annihilated after recombining across the band gap and can play no further part in photon generation. However in a unipolar QCL, once an electron has undergone an intersubband transition and emitted a photon in one period of the superlattice, it can tunnel into the next period of the structure where another photon can be emitted. This process of a single electron causing the emission of multiple photons as it traverses through the QCL structure gives rise to the name "cascade" and makes a quantum efficiency of greater than unity possible which leads to higher output powers than semiconductor laser diodes.

Operating principles

Rate equations

QCLs are typically based upon a three-level system. Assuming the formation of the wavefunctions is a fast process compared to the scattering between states, the time independent solutions to the Schrödinger equation may be applied and the system can be modelled using rate equations. Each subband contains a number of electrons n_i (where i is the subband index) which scatter between levels with a lifetime au_{if} (reciprocal of the average intersubband scattering rate W_{if}), where i and f are the initial and final subband indices. Assuming that no other subbands are populated, the rate equations for the three laser levels are given by:

:frac{mathrm{d}n_3}{mathrm{d}t} = I_{mathrm{in + frac{n_1}{ au_{13 + frac{n_2}{ au_{23 -frac{n_3}{ au_{31 - frac{n_3}{ au_{32

:frac{mathrm{d}n_2}{mathrm{d}t} = frac{n_3}{ au_{32 + frac{n_1}{ au_{12 -frac{n_2}{ au_{21 - frac{n_2}{ au_{23

:frac{mathrm{d}n_1}{mathrm{d}t} = frac{n_2}{ au_{21 + frac{n_3}{ au_{31 -frac{n_1}{ au_{13 - frac{n_1}{ au_{12 - I_{mathrm{out

In the steady state, the time derivatives are equal to zero and I_{mathrm{in=I_{mathrm{out=I. The general rate equation for electrons in subband "i" of an "N" level system is therefore:

:frac{mathrm{d}n_i}{mathrm{d}t} = sumlimits_{j=1}^Nfrac{n_j}{ au_{ji-n_isumlimits_{j=1}^Nfrac{1}{ au_{ij+I(delta_{i0}-delta_{iN}),

Under the assumption that absorption processes can be ignored (which is valid at low temperatures), the middle rate equation gives

:frac{n_3}{ au_{32 = frac{n_2}{ au_{21

Therefore if au_{32} > au_{21} (i.e. W_{21} > W_{32}) then n_3 > n_2 and a population inversion will exist. The population ratio is defined as

:frac{n_3}{n_2} = frac{ au_{32{ au_{21 = frac{W_{21{W_{32

If all "N" steady-state rate equations are summed, the right hand side becomes zero, meaning that the system is underdetermined, and it is possible only to find the relative population of each subband. An additional equation is required to set the total number of carriers equal to the total number of dopant ions:

:sumlimits_{i=1}^{N}n_i=N_{mathrm{2D.

Active region designs

The scattering rates are tailored by suitable design of the layer thicknesses in the superlattice which determine the electron wave functions of the subbands. The scattering rate between two subbands is heavily dependent upon the overlap of the wave functions and energy spacing between the subbands. The figure shows the wave functions in a three quantum well (3QW) QCL active region and injector.

In order to decrease W_{32}, the overlap of the upper and lower laser levels is reduced. This is often achieved through designing the layer thicknesses such that the upper laser level is mostly localised in the left-hand well of the 3QW active region, while the lower laser level wave function is made to mostly reside in the central and right-hand wells. This is known as a "diagonal" transition. A "vertical" transition is one in which the upper laser level is localised in mainly the central and right-hand wells. This increases the overlap and hence W_{32} which reduces the population inversion, but it increases the strength of the radiative transition and therefore the gain.

In order to increase W_{21}, the lower laser level and the ground level wave functions are designed such that they have a good overlap and to increase W_{21} further, the energy spacing between the subbands is designed such that it is equal to the longitudinal optical (LO) phonon energy (~36 meV in GaAs) so that resonant LO phonon-electron scattering can quickly depopulate the lower laser level.

Material systems

The first QCL was fabricated in the InGaAs/InAlAs material system lattice-matched to an InP substrate.Fact|date=September 2007 This particular material system has a conduction band offset (quantum well depth) of 520 meV.Fact|date=September 2007 These InP-based devices have reached very high levels of performance across the mid-infrared spectral range, achieving high power, above room-temperature, continuous wave emission.Fact|date=September 2007

In 1998 GaAs/AlGaAs QCLs were demonstrated by Sirtori "et al" proving that the QC concept is not restricted to one material system.Fact|date=September 2007 This material system has a varying quantum well depth depending on the aluminium fraction in the barriers.Fact|date=September 2007 Although GaAs-based QCLs have not matched the performance levels of InP-based QCLs in the mid-infrared, they have proven to be very successful in the Terahertz region of the spectrum.Fact|date=September 2007

The short wavelength limit of QCLs is determined by the depth of the quantum well and recently QCLs have been developed in material systems with very deep quantum wells in order to achieve short wavelength emission. The InGaAs/AlAsSb material system has quantum wells 1.6 eV deep and has been used to fabricate QCLs emitting at 3 μm.Fact|date=September 2007 InAs/AlSb QCLs have quantum wells 2.1 eV deep and electroluminescence at wavelengths as short as 2.5 μm has been observed.Fact|date=September 2007

QCLs may also allow laser operation in materials traditionally considered to have poor optical properties. Indirect bandgap materials such as silicon have minimum electron and hole energies at different momentum values. For interband optical transitions, carriers change momentum through a slow, intermediate scattering process, dramatically reducing the optical emission intensity. Intersubband optical transitions however, are independent of the relative momentum of conduction band and valence band minima and theoretical proposals for Si/SiGe quantum cascade emitters have been made. [cite journal |quotes= |last=Paul|first=Douglas J|authorlink= |coauthors= |year= 2004|month= |title= Si/SiGe heterostructures: from material and physics to devices and circuits
journal=Semicond. Sci. Technol. |volume=19 |issue= |pages= R75–R108|doi=10.1088/0268-1242/19/10/R02|url=http://www.iop.org/EJ/abstract/0268-1242/19/10/R02|accessdate=2007-02-18|format= abstract
]

Emission wavelengths

QCLs currently cover the wavelength range from 2.75 - 250 μm (and extends to 355 μm with the application of a magnetic field).Fact|date=November 2007

Optical waveguides

The first step in processing quantum cascade gain material to make a useful light-emitting device is to confine the gain medium in an optical waveguide. This makes it possible to direct the emitted light into a collimated beam, and allows a laser resonator to be built such that light can be coupled back into the gain medium.

Two types of optical waveguides are in common use. A ridge waveguide is created by etching parallel trenches in the quantum cascade gain material to create an isolated stripe of QC material, typically ~10 um wide, and several mm long. A dielectric material is typically deposited in the trenches to guide injected current into the ridge, then the entire ridge is typically coated with gold to provide electrical contact and to help remove heat from the ridge when it is producing light. Light is emitted from the cleaved ends of the waveguide, with an active area that is typically only a few micrometers in dimension.

The second waveguide type is a buried heterostructure. Here, the QC material is also etched to produce an isolated ridge. Now, however, new semiconductor material is grown over the ridge. The change in index of refraction between the QC material and the overgrown material is sufficient to create a waveguide. Dielectric material is also deposited on the overgrown material around QC ridge to guide the injected current into the QC gain medium. Buried heterostructure waveguides are efficient at removing heat from the QC active area when light is being produced.

Laser types

Although the quantum cascade gain medium can be used to produce incoherent light in a superluminescent configuration, [cite journal
last=Zibik
first=E. A.
coauthors=W. H. Ng, D. G. Revin, L. R. Wilson, J. W. Cockburn, K. M. Groom, and M. Hopkinson
year=2006
month=March
title= Broadband 6 µm < λ < 8 µm superluminescent quantum cascade light-emitting diodes
journal=Appl. Phys. Lett.
volume=88
issue=12
pages=121109
doi=10.1063/1.2188371
] it is most commonly used in combination with an optical cavity to form a laser.

Fabry-Perot lasers

This is the simplest of the quantum cascade lasers. An optical waveguide is first fabricated out of the quantum cascade material to form the gain medium. The ends of the crystalline semiconductor device are then cleaved to form two parallel mirrors on either end of the waveguide, thus forming a Fabry-Perot resonator. The residual reflectivity on the cleaved facets from the semiconductor-to-air interface is sufficient to create a resonator. Fabry-Perot quantum cascade lasers are capable of producing high powers [cite journal |last=Slivken |first=S. |coauthors=A. Evans, J. David, and M. Razeghi |year=2002 |month=Dec. |title= High-average-power, high-duty-cycle (λ ~ 6 µm) quantum cascade lasers |journal=Applied Physics Letters |volume=81 |issue=23 |pages=4321–4323 |doi=10.1063/1.1526462 ] , but are typically multi-mode at higher operating currents. The wavelength can be changed chiefly by changing the temperature of the QC device.

Distributed feedback lasers

A distributed feedback (DFB) quantum cascade laser [cite journal |last=Faist |first=Jérome |coauthors=Claire Gmachl, Frederico Capasso, Carlo Sirtori, Deborah L. Silvco, James N. Baillargeon, and Alfred Y. Cho |year=1997 |month=May |title= Distributed feedback quantum cascade lasers |journal=Applied Physics Letters |volume=70 |issue=20 |pages=2670 |doi=10.1063/1.119208 ] is similar to a Fabry-Perot laser, except for a distributed Bragg reflector (DBR) built on top of the waveguide to prevent it from emitting at other than the desired wavelength. This forces single mode operation of the laser, even at higher operating currents. DFB lasers can be tuned chiefly by changing the temperature, although an interesting variant on tuning can be obtained by pulsing a DFB laser. In this mode, the wavelength of the laser is rapidly “chirped” during the course of the pulse, allowing rapid scanning of a spectral region. [citation
title = Quantum-cascade lasers smell success
url= http://www.laserfocusworld.com/display_article/224013/12/none/none/OptWr/Quantum-cascade-lasers-smell-success
date=2005-03-01
work= Laser Focus World
publisher=PennWell Publications
accessdate= 2008-03-26
]

External cavity lasers

In an external cavity (EC) quantum cascade laser, the quantum cascade device serves as the laser gain medium. One, or both, of the waveguide facets have an anti-reflection coating that defeats the optical cavity action of the cleaved facets. Mirrors are then arranged in a configuration external to the QC device to create the optical cavity.

If a frequency-selective element is included in the external cavity, it is possible to reduce the laser emission to a single wavelength, and even tune the radiation. For example, diffraction gratings have been used to create [cite journal |last=Maulini |first=Richard |coauthors=Mattias Beck, Jérome Faist, and Emilio Gini |year=2004 |month=Mar. |title= Broadband tuning of external cavity bound-to-continuum quantum-cascade lasers |journal=Applied Physics Letters |volume=84 |issue=10 |pages=1659 |doi=10.1063/1.1667609 ] a tunable laser that can tune over 15% of its center wavelength.

Growth

The alternating layers of the two different semiconductors which form the quantum heterostructure are grown on to a substrate using molecular beam epitaxy (MBE) or metalorganic vapour phase epitaxy (MOVPE).

Applications

Distributed feedback (DFB) quantum cascade lasers were first commercialized in 2004, [citation
title = Alpes offers CW and pulsed quantum cascade lasers
url= http://www.laserfocusworld.com/display_article/202916/12/ARCHI/none/PRODH/Alpes-offers-CW-and-pulsed-quantum-cascade-lasers
date=2004-04-19
work= Laser Focus World
publisher=PennWell Publications
accessdate= 2007-12-01
] and broadly-tunable external cavity quantum cascade lasers first commercialized in 2006. [citation
title = Tunable QC laser opens up mid-IR sensing applications
url= http://www.laserfocusworld.com/display_article/259939/12/none/none/OptWr/Tunable-QC-laser-opens-up-mid-IR-sensing-applications
date=2006-07-01
work= Laser Focus World
publisher=PennWell Publications
accessdate= 2008-03-26
] The high optical power output, tuning range and room temperature operation make QCLs useful for spectroscopic applications such as remote sensing of environmental gases and pollutants in the atmospherecite journal
last1 = Normand
first1 = Erwan
last2 = Howieson
first2 = Iain
last3 = McCulloch
first3 = Michael T.
publication-date = April 2007
title = Quantum-cascade lasers enable gas-sensing technology
journal = Laser Focus World
volume = 43
issue = 4
pages = 90–92
issn = 1043-8092
url = http://www.laserfocusworld.com/display_article/289410/12/none/none/Feat/QUANTUM-CASCADE-LASERS:-Quantum-cascade-lasers-enable-gas-sensing-technolog
accessdate = 2008-01-25
] and homeland security. They may eventually be used for vehicular cruise control in conditions of poor visibility,Fact|date=January 2008 collision avoidance radar,Fact|date=January 2008 industrial process control,Fact|date=January 2008 and medical diagnostics such as breath analyzers.Fact|date=January 2008 QCLs are also used to study plasma chemistry.Fact|date=January 2008

Their large dynamic range,Clarifyme|date=March 2008 excellent sensitivity,Clarifyme|date=March 2008 and failsafe operationClarifyme|date=March 2008 combined with the solid-state reliability should easilyOr|date=January 2008 overcome many of the technological hurdlesClarifyme|date=March 2008 that impede existing technology in these markets. When used in multiple-laser systems, intrapulse QCL spectroscopyClarifyme|date=March 2008 offers broadband spectral coverage that can potentially be used to identify and quantify complex heavy molecules such as those in toxic chemicals, explosives, and drugs.citation
last1 = Howieson
first1 = Iain
last2 = Normand
first2 = Erwan
last3 = McCulloch
first3 = Michael T.
publication-date = 2005-03-01
title = Quantum-cascade lasers smell success
journal = Laser Focus World
volume = 41
issue = 3
issn = 0740-2511
pages = S3-+
url = http://www.laserfocusworld.com/display_article/224013/12/ARCHI/none/OptWr/Quantum-cascade-lasers-smell-success
accessdate = 2008-01-25
]

Unguided QCL emission in the 3 - 5 μm atmospheric window could be used as a cheaper alternative to optical fibres for high-speed Internet access in built up areas.Fact|date=January 2008

References

External links

* [http://www.bell-labs.com/org/physicalsciences/projects/qcl/qcl.html Bell Labs summary]
** [http://www.bell-labs.com/org/physicalsciences/psr/qc/index.html Bell Labs technical information]
* [http://physicsweb.org/article/world/12/6/9 PhysicsWeb: Quantum Cascade Lasers]
* [http://www.wsi.tu-muenchen.de/E26/en/research/qcl/ Walter Schottky Institute explanation, with diagrams]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • quantum cascade laser — noun A laser that operates by analogy with an electronic waterfall, with electrons cascading down a series of small steps emitting a photon at each step. <! any more information than that would be in an encyclopedia. Until someone writes it up …   Wiktionary

  • Laser diode — Top: a packaged laser diode shown with a penny for scale. Bottom: the laser diode chip is removed from the above package and placed on the eye of a needle for scale …   Wikipedia

  • Laser à cascade quantique — Le laser à cascade quantique (abrégé en QCL pour Quantum Cascade Laser) est un laser à semi conducteur, pouvant émettre de l infra rouge moyen à l infra rouge lointain dont le principe d’émission par cascade quantique a été initialement proposé… …   Wikipédia en Français

  • Cascade — A cascade is a type of waterfall or a series of waterfalls.Cascade may also refer to: Places North America* Cascade Range, a mountain range on the west coast of North America * Cascade Volcanoes, a grouping of volcanoes on the west coast of North …   Wikipedia

  • laser — 1. noun /ˈleɪz.ə(ɹ)/ a) A device that produces a monochromatic, coherent beam of light. b) A gum resin obtained from certain umbelliferous plants. See Also: antilaser, lase, Laserdisc, laser disc, l …   Wiktionary

  • Laser absorption spectrometry — (LAS) refers to techniques that utilize lasers to assess the concentration or amount of a species in gas phase by absorption spectrometry (AS).It is well known that optical spectroscopic techniques in general and laser based techniques in… …   Wikipedia

  • Laser — For other uses, see Laser (disambiguation). United States Air Force laser experiment …   Wikipedia

  • laser — /lay zeuhr/, n. Physics. a device that produces a nearly parallel, nearly monochromatic, and coherent beam of light by exciting atoms to a higher energy level and causing them to radiate their energy in phase. Also called optical maser. [1955 60; …   Universalium

  • Différents types de laser — Liste des différents types de laser Ceci est une liste des différents types de lasers avec la longueur d onde sur laquelle ils opèrent et leurs applications. Il existe plusieurs milliers de sortes de lasers mais la plupart d entre eux ne sont… …   Wikipédia en Français

  • Liste des différents types de laser — Ceci est une liste des différents types de lasers avec la longueur d onde sur laquelle ils opèrent et leurs applications. Il existe plusieurs milliers de sortes de lasers mais la plupart d entre eux ne sont utilisés que dans le cadre de… …   Wikipédia en Français