Thickness planer

Thickness planer

A thickness planer (also known in the UK and Australia as a thicknesser or in North America as a planer) is a woodworking machine which is used to create boards that are of an even thickness throughout their length and flat on the upper surface.


A thickness planer consists of three elements: a cutter head which contains the cutting knives; a set of in feed and out feed rollers which draw the board through the machine; and a table which is adjustable relative to the cutter head to control the resultant thickness of the board. Some portable thickness planers differ slightly in that the table is fixed and it is the cutter head/feed roller assembly which is adjusted.

Industrial thickness planers are capable of accepting very wide boards and removing large amounts of material in a single pass. These machines are driven by powerful induction motors and are of very heavy construction. In recent times, a range of light-weight portable thickness planers have become available which use universal motors and are much cheaper than the industrial versions.


In operation, the table is set to the desired height and the machine is switched on. The board is fed into the machine until it makes contact with the in feed roller, which grips the board and draws it into the machine and past the rotating cutter head. The knives remove an amount of material on the way through and the out feed roller pulls the board through and ejects it from the machine at the end of the pass.

In order to achieve a board that is flat and of uniform thickness along its length, it is necessary to start with a board that has at least one perfectly flat reference face. The board is fed with this reference face flat on the table and the cutter head removes an amount of material from the opposite face so that it is made parallel to the reference face. The reference face is often created by first passing the board over a jointer. If the lower face is not flat, the feed roller pressure pressing the board against the table will deform the board, which will then spring back as it leaves the machine, resulting in a non-flat upper surface.

One problem often encountered when using a thickness planer is snipe. This manifests as a deeper cut on a short section of the board at either end and is caused by incorrect feeding or misalignment of the in feed or out feed tables.

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Thickness — may refer to:* Thickness in graph theory * Thickness of layers in Geology * Thickness planer a woodworking machine * Optical thickness in optics …   Wikipedia

  • Planer — The term planer may refer to several types of carpentry tools, woodworking machines or metalworking machine tools.*Hand plane mdash; a hand tool used to produce flat surfaces by shaving the face of the wood. *Jointer mdash; a machine that… …   Wikipedia

  • planer — noun a) A woodworking tool which smooths a surface or makes one surface of a workpiece parallel to the tools bed. b) A large machine tool in which the workpiece is traversed linearly (by means of a reciprocating bed) beneath a single point… …   Wiktionary

  • planer — /play neuhr/, n. 1. Carpentry. a power machine for removing the rough or excess surface from a board. 2. Metalworking. a machine for cutting flat surfaces, having a cutting tool supported by an overhead frame beneath which the work slides back… …   Universalium

  • Jointer — For the machine used to make joints using wooden biscuits or plates, see Biscuit joiner A jointer (also known in the UK and Australia as a planer or surface planer, and sometimes also as a buzzer or flat top) is a woodworking machine used in… …   Wikipedia

  • Drill bit — For the fictional character, see Drill Bit (Transformers). For the cancelled skyscraper nicknamed Drill bit, see Chicago Spire. For the types used in drilling wells, see Well drilling. From top to bottom: Spade, lip and spur (brad point), masonry …   Wikipedia

  • Micrometer — This article is about the measuring device. For the unit of length, see Micrometre. Outside, inside, and depth micrometers A micrometer (   …   Wikipedia

  • Scrub plane — The scrub plane is a type of plane used to remove large amounts of wood from the surface of lumber, such as when eliminating cup or twist in the first stages of preparing rough stock, or when reducing the thickness of a board significantly. Scrub …   Wikipedia

  • Coping saw — A coping saw. A coping saw is a type of hand saw used to cut intricate external shapes and interior cutouts in woodworking or carpentry. It is widely used to cut moldings to create coped rather than miter joints. It is occasionally used to create …   Wikipedia

  • Milling cutter — Milling cutters are cutting tools typically used in milling machines or machining centres (and occasionally in other machine tools). They remove material by their movement within the machine (e.g., a ball nose mill) or directly from the cutter s… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.