Oxygen Equivalent

Oxygen equivalent compares the relative amount of oxygen available for respiration at a variable pressure to that available at SATP. As external respiration depends on the exchange of gases due to partial pressures across a semipermeable membrane and normally occurs at SATP, an oxygen equivalent may aid in recognizing and managing variable oxygen availabiity during procedures such as hyperbaric oxygen therapy or medical air transport.

It does so by expressing oxygen concentration as a ratio of the partial pressure of oxygen at a given altitude or pressure to Standard Atmospheric Pressure; rather than as a ratio of the PO₂ at a given pressure to the total pressure of the gas mixture. The latter would generally be 0.2095, the atmospheric concentration by volume of O₂, although FO₂ and P_atm vary for extraterrestrials. Calculations occur as follows:

Let O₂E be oxygen equivalent, FO₂ be the fractional concentration of oxygen, P_atm (generally 760 mmHg, barring intergalactic travel), P_b be the barometric pressure, and dP be the change in pressure at a given altitude. Then,

O₂E = FO₂(P_b + dP)/ P_atm

It is worthwhile to note that pressures may often be expressed in units of distance such as feet when diving. For this, note that descending 33 ft in salt water or 33.9 ft in fresh water results in a change of 1 atm, so distance and pressure are used interchangeably in this context.

References

• Williams, Paul. 'Lectures on Respiratory Physics'. Ed. J. Brown et al. (London, ON: FC, 2011).