- Security lighting
In the field of
physical security, security lighting is often used as a preventative and corrective measure against intrusions or other criminal activity on a physical piece of property. Security lighting may be provided to aid in the detection of intruders, to deter intruders, or in some cases simply to increase the feeling of safety.
There are no good scientific studies that convincingly show the relationship between lighting and crime. [ [http://www.newyorker.com/reporting/2007/08/20/070820fa_fact_owen The Dark Side] URL las accessed on
September 12 2007] In some cases, lighting seems to deter crime and it makes people feel more secure, but in reality they may be just as secure without the lighting. [ [http://www.darksky.org/links/seculigh.html IDA's position on lighting and crime] Url last accessed on May 6 2006]
Some people are surprised to learn that security lighting is counter-productive. Turning off lights halved the number of thefts and burglary in
ÖvertorneåSweden."There is no reliable scientific evidence that outdoor lighting deters crime more than it facilitates crime. There is good evidence that darkness reduces crime." [Schneier on Security [http://www.schneier.com/blog/archives/2007/09/light_and_crime.html "Light and Crime"] ]
While adequate lighting around a physical structure is deployed to reduce the risk of an intrusion, it is critical that the lighting be designed carefully as poorly arranged lighting can create glare which actually obstructs vision.Studies Fact|date=February 2007 have shown that many criminals are aware of this effect and actively exploit it.The optimal design will also depend on whether the area will be watched directly by humans or by
closed-circuit television, and on the location of the observers or cameras.
Security lighting may be subject to
vandalism, possibly to reduce its effectiveness for a subsequent intrusion attempt. Thus security lights should either be mounted very high, or else protected by wire meshor tough polycarbonateshields. Other lamps may be completely recessed from view and access, with the light directed out through a light pipeor reflected from a polished aluminium or stainless steel mirror. For similar reasons high security installations may provide a stand-by power supply for their security lighting.
Some typical considerations include:
* Reduce and prevent glare and situations mentioned above
** Shielded or full cut-off (FCO) lamp housings which conceal the bulb could be used, which should direct light onto the ground or target and away from observers. These lights should send no light above 80 degrees from the
nadir. Lighting should be bright enough, and not "as bright as possible". In many cases a good rule of thumbis 0.5 watts per square metre(0.05 watts per square foot). This might need to be increased in very confused environments, but conversely can be reduced in very open environments. Multiple lamps of moderate power instead of a few powerful lamps will reduce glare, provide more even illumination with reduced pools of shadow, and provide some redundancy if one lamp's bulb blows out or develops a bad ballast.
* Prevent malicious tampering or interference. This means that besides the lamp itself, the entire circuit from the source (
Electric companyor generator), through the wires, to the lamp and back should be protected.
** Luminaires should be accessible so that the maintainer can replace blown bulbs as quickly as possible and clean the luminaires periodically. However they should be protected or somehow made inaccessible to tampering.
** Ensure the
electric meterbox is locked or inaccessible, or else power the lights from a different line.
** Control and power lines, where outside or vulnerable, should be either buried well underground (in
conduits preferably) or at a height of at least 8 metres (about 24 feet).
** Ideally multiple circuits should be used to prevent an accidental or malicious short or cut causing all illumination to fail.
Security lighting can be used in residential, commercial, industrial, institutional, and military settings. Some examples of security lighting include
floodlights and low pressure sodium vapour lights. Most lights intended to be left on all night are high-intensity discharge lamps as these have good energy efficiency, thus reducing the cost of running a lamp for such long periods.
A disadvantage of low pressure sodium lamps is that the colour is pure yellow, so the illuminated scene is seen without any colour differentiation. Consequently high pressure sodium vapour lamps (which are still yellowish, but closer to golden white) are also used, at the cost of greater running expenses and increased light pollution. High pressure sodium lamps also take slightly longer to restrike after a power interruption.
Other lights may be activated by sensors such as
passive infrared sensors (PIRs), turning on only when a person (or other mammal) approaches. PIR activated lamps will usually be incandescent bulbs so that they can activate instantly; energy saving is less important since they will not be on all the time. PIR sensor activation can increase both the deterrent effect (since the intruder knows that he has been detected) and the detection effect (since a person will be attracted to the sudden increase in light). Some PIR units can be set up to sound a chime as well as turn on the light. Most modern units have a photocellso that they only turn on when it is dark.
A recent addition to the field of security lighting is the blue outdoor lamp (similar to
mercury-vapor lamps), used to illuminate areas which have been used by drug addicts to inject drugs. The idea is that the blue lighting makes it impossible to identify veins, thus discouraging the addicts from using that location to "shoot up" and then discard needles. [ [http://archive.theargus.co.uk/1999/2/18/198732.html Blue Light to Drive The Addicts Away] The Argus February 18 1999Url last accessed May 6 2006]
An important limitation to the usefulness of security lighting is the simple fact that it is only useful at night. This is particularly significant for home owners because, contrary to a widespread myth, most household burglaries occur during the day, when the occupants are away at work or shopping.
As with any lighting, security lighting can reduce
night vision, making it harder to see into areas that are unlit or are in shadow.
Wikimedia Foundation. 2010.