Optical granulometry

Optical granulometry is the process of measuring the different grain sizes in a granular material^[1], based on a photograph. Technology has been created to analyze a photograph and create statistics based on what the picture portrays. This information is vital in maintaining machinery in various trades worldwide. Mining companies can use optical granulometry to analyze inactive or moving rock to quantify the size of these fragments.^[2] Forestry companies can zero in on wood chip sizes without stopping the production process, and minimize sizing errors.^[3]

With more photoanalysis technologies being produced, mining companies have shown an increased interest in these types of systems because of their ability to maintain efficiency throughout the mining process^[4]. Companies are saving millions of dollars annually because of this new technology, and are cutting back on maintenance costs on equipment.^{[citation needed]}

In order for optical granulometry to be completely successful, an accurate photo must be taken – under sufficient lighting, and using proper^{[clarification needed]} technology – to obtain quantified results.^[5] If these requirements are met, an image analysis system can be implemented.

The process

Software uses four basic steps in determining the average size of material:

Step 1: Taking a photo- A sample of the material you would like to measure

Step 2: Edge Detection- By completing an edge detection process, the software can determine the various sizes of material in the photo

Step 3: Virtual Sieve- The length to width ratio is measured in this step of the process. The individual particle sizes are measured instantly.

Step 4: Graphical Output- In this step, statistical data and size distribution is plotted on an easy-to-read form for operators.

See the wikipedia article on Photoanalysis to see how mining, forestry and agricultural companies are using this technology to improve quality control techniques.

Notes

1. ^ Definition of granularity at GEMET
2. ^ (Franklin and Katsabanis 1996), page 68
3. ^ (Franklin and Katsabanis 1996), page 47
4. ^ (Franklin and Katsabanis 1996), page 258
5. ^ (Franklin and Katsabanis 1996), page 115

References

• Measurement of Blast Fragmentation: Proceedings of a Workshop Held Parallel With Fragblast-5, Montreal, 26-29 August 1996, by John A. Franklin, Takis Katsabanis, Published by Taylor & Francis, 1996, ISBN 9054108452

External links

• WipWare Photoanalysis Systems
• Bonfield Mining Group
• Topex Consulting Group
• Free Web Application for Particle and Grain Analysis