Monotype System

Monotype System

The Monotype system is a set of two machines, the Monotype keyboard and the Monotype caster, which are used to typeset printed matter.

A Monotype operator enters text on a Monotype keyboard, on which characters are arranged in the QWERTY arrangement of a conventional typewriter, but with this arrangement repeated multiple times. Thus, the typesetter moves his hands from one group of keys to another to type uppercase or lowercase, small capitals, italic uppercase or italic lowercase, and so on.

When the text nears the right margin, a drum on the keyboard indicates codes which are punched on the paper tape with special keys to indicate how the line is to be justified. The tape is then taken to the Monotype caster, which reads the tape and produces a column of justified type from which the text entered on the keyboard can be printed.

Contents

History

In 1885, the American inventor Tolbert Lanston applied for a patent on a typesetting system which included the basic Monotype keyboard, but which produced a printing surface through a cold-stamping method. In 1890, he filed a subsequent patent which covered the Monotype caster.

In 1897, the Lanston Monotype Corporation opened a branch in England, which later became an independent company.

Design

Keyboard

A Monotype keyboard allows a keyboard operator to prepare a paper tape which will direct the casting of type separately from its actual casting. The actual keyboard on which the operator types, as well as a set of keybars under the keys which determine which holes will be punched in the tape corresponding to each key that is pressed, are removable. During operation, two sets of keys and keybars are placed in two side-by-side trays on the keyboard.

The keybars are adjustable so that the coding of the keys can be changed. Keytops are replaceable as well, so that the keyboard can be configured

Matrix-Case

In order for the Monotype caster to produce types with the shape of the desired character on their face, a matrix with that character incised in it needs to be moved to the top of the mold in which the type slug will be cast. This is achieved by placing a rectangular array of brass matrices, each of which is one-fifth of an inch square, in a holder called the matrix-case. Originally, it contained 225 matrices in 15 rows and 15 columns; later versions of the Monotype caster expanded that first to 15 rows and 17 columns, and then to 16 rows and 17 columns.

The paper tape that controls casting contains 14 columns of holes which indicate the row of the matrix-case to be used, and 14 columns of holes which indicate the column of the matrix-case to be used. Originally, one row and one column of the matrix-case were indicated by the absence of a hole, and each of the others was indicated by a single hole. When the matrix-case was enlarged, some columns or rows of the matrix-case were indicated by combinations of two holes instead.

The row of the matrix-case on which the matrix for a character is contained also indicated the width of that character. This was one major reason why the keyboard needed to be easily reconfigured, since the arrangement of characters in the matrix case would vary depending on the typeface in use. A part called the "wedge" indicated the width corresponding to each row of the matrix-case.

Justification

The width of a type slug cast on the Monotype varied from 3 to 18 units. (A special attachment was required to reduce the minimum from 4 units to 3 units.) 18 units corresponded to the "set width" of the typeface in use. Thus, if a typeface was described as "12 set", 18 units would correspond to one pica em. (A "pica em" is a technical term used by printers to refer to a horizontal distance equal to 12 points.)

The 12 point size of a typeface could also be 12 set, the 11 point size could be 11 set, and so on. But this was not necessarily always true. Some typefaces could be somewhat wider or narrower than the standard; also, many typefaces were modified to be slightly wider in smaller sizes. The set size could be varied in units of 1/4 point.

Thus, while the Monotype unit system was normally referred to as one of 18 units to the em, it was 18 units to the em of the set size, not necessarily the em of the actual type size in use.

When text was typed on the Monotype keyboard, the keyboard kept track of the number of units taken up by the characters in the line, and also the number of "justifying spaces" in the line. When the right margin was approached, this information was indicated to the operator on a rotating drum on the keyboard. As part of finishing a line of text, this information was punched on the tape using two rows of special keys on the keyboard.

In order that the Monotype caster would know ahead of time how wide to make the spaces in a given line of text, the tape was placed on the caster so as to be read in the reverse order from that in which the text was typed.

Justification wedges

Justification was obtained with a system of wedges. The caster has an accuracy of 2000 parts of an inch, in modern terms: 2000dpi.

  • the wedge belonging to the layout of the diecase or matrix-case
This wedge made a similar movement as the diecase, and the rows are polished according to the layout and the set of the used font.
  • 0005-justification wedge
This wedge can be laid in 15 different positions, the difference between two positions is .0005 inch
  • 0075-justification wedge
This wedge can be laid in 15 different positions, the difference between two positions is .0075 inch
  • unit-adding wedge
Using this wedge added 1, 2 or 3 units to the cast character. The attachment used for this, did need some extra coding.
  • the upper transfer-wedge
This wedge was used when the justification were in use.
  • the lower transfer-wedge

The actions of all these wedges combined did govern the opening of the mould-blade, and in this way the width of the character or space to be cast was adjusted.

The position of the 0005- and 0075-wedges was put onto the right position during the codes that marked the start of casting the line. Two codes were used during a procedure that was called:

Double-justification.

  • The first code - with three holes in the ribbon - caused the following actions:
    • the pump was stopped
    • both justification-wedges moved to the position of 0005
    • the previous line already cast was transferred to the galley
  • the second code - with two holes in the ribbon - was needed for:
    • to halt the pump for this machine-cycle
    • activating the pump-mechanism for the next machine cycle
    • to bring the 0075-wedge in the desired position

The 3/8-position was called "neutral". In this position the 0075-wedge was at row 3, and the 0005-wedge at row 8. In this position no width was added tot the space or character to be cast. The minimum was 1/1. In this position the width of the cast would be 2 * .0075" + 7 * .0005" = 0.0185" less. The maximum 15/15 would add a lot more to the cast: 12 * .0075" + 7 * .0005" = .00935 ". The operator had to be aware that the opening of the mould should always be smaller than .2" because otherwise the matrix could not seal the mould, and a splash of molten lead would occur.

Single justifcation was used to change the position of the justification wedges whenever needed, without transferring the line to the galley. This procedure was also used to be able to adjust the spaces in more than one segments within a line. In this way it was possible to cast complete time-tables.

  • The first code - with two holes in the ribbon - caused the following actions:
    • the pump was stopped, and halted
    • the 0005-justification-wedge moved to its desired position
  • the second code - with two holes in the ribbon - was needed for:
    • no the pump-action during this machine-cycle
    • activating the pump-mechanism for the next machine cycle
    • to bring the 0075-wedge in the desired position

Besides this, there was also the possibility to cast "high-spaces". Those high-spaces could support any overhanging character. When a character could not cast at the desired width at the place it was put into the matrix-case, the character could be cast. A part of the sign would not be supported by the ingot. Directly after the character was cast, one or more "high-spaces" of 5 or 6 units were cast, to add to the desired width and to support the sign, in order to resist the pressure during the printing-process.

On top of this, there was the possibility of "Unit-shift". With this attachment it became possible to use matrix-case with an extra row: 16 * 17 positions. The wedge still had only 15 positions. The matrix-case was - when needed - forced to go to the next row. The matrix was cast at the width of the wedge 1 position higher. This system made it possible to place more matrices in the matrix-case. Another advantage for Monotype was, that it made it possible to change the layout of the matrix-case, in such a way, that any customer could get its own "personalized" layout.

There has been a second 16 * 17 system, where both the matrix-case and the wedge had 16 possible positions. This system was rather expensive, because all the extra wedges needed, that could not be used on other machines. The 16th row was coded with a code of two or three letters. Of this system there have been two variants: the extra row was coded with either MNH or MNK.[1]

See also

References

  1. ^ The Monotype Keyboard operator's manual, 1950, The National Committee of Monotype user's Association, London, UK
  • Printing Industries of America (1953). A Composition Manual. Brooklyn, NY. 
  • Lanston Monotype Machine Co. (1912). The Monotype System. Philadelphia. 
  • Lucien Alphonse Legros, John Cameron Grant (1916). Typographical Printing-Surfaces. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Monotype (disambiguation) — A monotype is a print made by drawing or painting on a smooth, non absorbent surface. Monotype may also refer to: A monotypic taxon Monotype Corporation, a typesetting and typeface design company. Monotype System the typesetting machine made by… …   Wikipedia

  • Monotype unit system — Монотипная система расчёта ширин знаков …   Краткий толковый словарь по полиграфии

  • Giordano Memorization System - GMS — The Giordano Memorization System is a memory development system which was created in 1990 by Vladimir Alekseyevich Kozarenko. Its practical basis applies principles of classic mnemonics with elements from the Giordano Bruno memorization system.… …   Wikipedia

  • printing — /prin ting/, n. 1. the art, process, or business of producing books, newspapers, etc., by impression from movable types, plates, etc. 2. the act of a person or thing that prints. 3. words, symbols, etc., in printed form. 4. printed material. 5.… …   Universalium

  • Times Roman — Category Serif Classification Transitional Designer(s) Victor Lardent Comm …   Wikipedia

  • Hot metal typesetting — Part of a series on the History of printing Woodblock p …   Wikipedia

  • Hindley–Milner — In type theory, Hindley–Milner (HM) (also known as Damas–Milner or Damas–Hindley–Milner) is a classical type inference method with parametric polymorphism for the lambda calculus, first described by J. Roger Hindley[1] and later rediscovered by… …   Wikipedia

  • Type metal — The term type metal (sometimes called hot metal ) represents a range of metal alloys that are used in traditional typefounding and mechanical typesetting. History Although the knowledge of casting soft metals in moulds was well established before …   Wikipedia

  • Core fonts for the Web — was a project begun by Microsoft in 1996 to make a standard pack of fonts for the Internet. It was terminated in 2002.[1][2] It included the proprietary fonts Andale Mono, Arial, Arial Black, Comic Sans MS, Courier New, Georgia, Impact, Times New …   Wikipedia

  • Arial Unicode MS — In digital typography, the TrueType font Arial Unicode MS is an extended version of the font Arial. Compared to Arial, it includes higher line height, omits kerning pairs and adds enough glyphs to cover a large subset of Unicode 2.1 thus… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”