Thermal energy storage


Thermal energy storage
District heating accumulation tower from Theiss near Krems an der Donau in Lower Austria with a thermal capacity of 2 GWh

Thermal energy storage comprises a number of technologies that store thermal energy in energy storage reservoirs for later use. They can be employed to balance energy demand between day time and night time. The thermal reservoir may be maintained at a temperature above (hotter) or below (colder) that of the ambient environment. The applications today include the production of ice, chilled water, or eutectic solution at night, or hot water which is then used to cool / heat environments during the day.

Thermal energy is often accumulated from active solar collector or more often combined heat and power plants, and transferred to insulated repositories for use later in various applications, such as space heating, domestic or process water heating.

Contents

Solar energy storage

Most practical active solar heating systems have storage for a few hours to a day's worth of energy collected. There are also a small but growing number of seasonal thermal stores, used to store summer energy for space heating during winter. Molten salt is now in use as a means to retain a high temperature thermal store, in conjunction with concentrated solar power for later use in electricity generation, to allow solar power to provide electricity on a continuous basis, as base load energy. These molten salts (Potassium nitrate, Calcium nitrate, Sodium nitrate, Lithium nitrate, etc) have the property to absorb and store the heat energy that is released to the water, to transfer energy when needed. To improve the salt properties it must be mixed in a eutectic mixture.

Economics

High peak loads drive the capital expenditures of the electricity generation industry. The industry meets these peak loads with low-efficiency peaking power plants, usually gas turbines, which have lower capital costs but higher fuel costs. A kilowatt-hour of electricity consumed at night can be produced at much lower marginal cost. Utilities have begun to pass these lower costs to consumers[citation needed], in the form of Time of Use (TOU) rates, or Real Time Pricing (RTP) Rates. Thermal energy is cheaper than any other energy source.

Water Storage

Large stores are widely used in Scandinavia to store heat for several days, to decouple heat and power production and to help meet peak demands. Interseasonal stores have been investigated and appear to be economic, based on rock caverns.[1]

Ice-based technology

Thermal energy storage using ice makes use of the large heat of fusion of water. One metric ton of water, one cubic meter, can store 334 million joules (MJ) or 317,000 BTUs (93kWh or 26.4 ton-hours). In fact, ice was originally transported from mountains to cities for use as a coolant, and the original definition of a "ton" of cooling capacity (heat flow) was the heat to melt one ton of ice every 24 hours. This is the heat flow one would expect in a 3,000-square-foot (280 m2) house in Boston in the summer. This definition has since been replaced by less archaic units: one ton HVAC capacity = 12,000 BTU/hour (~3.5 kW). Either way, an agreeably small storage facility can hold enough ice to cool a large building for a day or a week, whether that ice is produced by anhydrous ammonia chillers or hauled in by horse-drawn carts.

As such there are developing and developed applications where ice is produced during off peak periods and used for cooling at later time.

Molten salt technology

Molten salt can be employed as a thermal energy storage method to retain thermal energy collected by a solar tower or solar trough so that it can be used to generate electricity in bad weather or at night. It was demonstrated in the Solar Two project from 1995-1999. The system is predicted to have an annual efficiency of 99%, a reference to the energy lost by storing heat before turning it into electricity, versus converting heat directly into electricity.[2][3][4] The molten salt is a mixture of 60 percent sodium nitrate and 40 percent potassium nitrate, commonly called saltpeter. It is non-flammable and nontoxic, and has already been used in the chemical and metals industries as a heat-transport fluid, so experience with such systems exists in non-solar applications. The addition of other nitrates like Calcium nitrate reduces the melting point (133 ºC).

The salt melts at 221 °C (430 °F). It is kept liquid at 288 °C (550 °F) in an insulated "cold" storage tank. The liquid salt is pumped through panels in a solar collector where the focused sun heats it to 566 °C (1,051 °F). It is then sent to a hot storage tank. This is so well insulated that the thermal energy can be usefully stored for up to a week.[citation needed]

When electricity is needed, the hot salt is pumped to a conventional steam-generator to produce superheated steam for a turbine/generator as used in any conventional coal, oil or nuclear power plant. A 100-megawatt turbine would need a tank of about 30 feet (9.1 m) tall and 80 feet (24 m) in diameter to drive it for four hours by this design.

Several parabolic trough power plants in Spain[5] and solar power tower developer SolarReserve use this thermal energy storage concept.

Research

Storing energy in molecular bonds is being investigated. Energy densities equivalent to Lithium ion batteries have been achieved.[6]

See also

References

  1. ^ Gebremedhin, Alemayehu; Heimo Zinko. "SEASONAL HEAT STORAGES IN DISTRICT HEATING SYSTEMS" (PDF). Linköping University, Linköping, Sweden. Archived from the original on 2011-07-13. http://www.webcitation.org/609jELkwS. Retrieved 2011-07-13. 
  2. ^ Mancini, Tom (10 January 2006). "Advantages of Using Molten Salt". Sandia National Laboratories. Archived from the original on 2011-07-14. http://www.webcitation.org/60AE7heEZ. Retrieved 2011-07-14. 
  3. ^ Molten salt energy storage system - A feasibility study Jones, B. G.; Roy, R. P.; Bohl, R. W. (1977) - Smithsonian/NASA ADS Physics Abstract Service. Abstract accessed December 2007
  4. ^ Biello, David. "How to Use Solar Energy at Night". Scientific American. Scientific American, a Division of Nature America, Inc.. http://www.scientificamerican.com/article.cfm?id=how-to-use-solar-energy-at-night. Retrieved 19 June 2011. 
  5. ^ Parabolic Trough Thermal Energy Storage Technology Parabolic Trough Solar Power Network. April 04, 2007. Accessed December 2007
  6. ^ Kolpak, Alexie M. (20 June 2011). "Azobenzene-Functionalized Carbon Nanotubes As High-Energy Density Solar Thermal Fuels". NANO Letters. American Chemical Society. http://pubs.acs.org/doi/full/10.1021/nl201357n. Retrieved 14 July 2011. 
  • "Prepared for the Thermal Energy Storage Systems Collaborative of the California Energy Commission" and "Source Energy and Environmental Impacts of Thermal Energy Storage." Tabors Caramanis & Assoc.

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Thermal (energy) Storage —   A technology that lowers the amount of electricity needed for comfort conditioning during utility peak load periods. A buildings thermal energy storage system might, for example, use off peak power to make ice or to chill water at night, later… …   Energy terms

  • Thermal energy storage —   The storage of heat energy during utility off peak times at night, for use during the next day without incurring daytime peak electric rates.   U.S. Dept. of Energy, Energy Information Administration s Energy Glossary …   Energy terms

  • Thermal Energy Storage —   The storage of heat energy during utility off peak times at night, for use during the next day without incurring daytime peak electric rates …   Energy terms

  • Energy storage — is the storing of some form of energy that can be drawn upon at a later time to perform some useful operation. A device that stores energy is sometimes called an accumulator. All forms of energy are either potential energy (eg. chemical,… …   Wikipedia

  • Energy Storage —   The process of storing, or converting energy from one form to another, for later use; storage devices and systems include batteries, conventional and pumped storage hydroelectric, flywheels, compressed gas, and thermal mass …   Energy terms

  • Flywheel energy storage — NASA G2 flywheel Flywheel energy storage (FES) works by accelerating a rotor (flywheel) to a very high speed and maintaining the energy in the system as rotational energy. When energy is extracted from the system, the flywheel s rotational speed… …   Wikipedia

  • Grid energy storage — is used to manage the flow of electrical energy. For large scale load levelling on an interconnected electrical system, electric energy producers send low value off peak excess electricity over the electricity transmission grid to temporary… …   Wikipedia

  • Solar thermal energy — Solar thermal system for water heating in Santorini, Greece …   Wikipedia

  • Outline of energy storage — The following outline is provided as an overview of and topical guide to energy storage: Energy storage – accomplished by devices or physical media that store some form of energy to perform some useful operation at a later time. A device that… …   Wikipedia

  • Compressed air energy storage — Conceptual representation of the compressed air energy storage concept. Off peak (low cost) electrical power compresses air into an underground air storage “vessel” (the Norton mine), and later the air feeds a gas fired turbine generator complex… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.