Dog-hole Ports


Dog-hole Ports

A Dog-hole port was the name given to small ports on the Pacific Coast between Central California and Southern Oregon that operated between the mid-1800s until 1939. They were called dog-holes because the schooners that served them would have to be able to "turn around in a harbor barely small enough for a dog".[1]

Contents

The Pacific Coast

There are five major seaports between Canada and Mexico: Seattle, Washington; Portland, Oregon; San Francisco, Los Angeles, and San Diego, California. Of the other ports on the Redwood Coast only Caspar, Crescent City, Humboldt, Noyo and Mendocino could serve as ports for the largest coastwise and small deepwater vessels. Another 20 could hold medium sized coasters. The rest, dog-holes, could only serve the smallest of the ships. The Redwood Coast extended from San Simeon in California]'s Central coast to the Chetco River on Oregon's Southwestern coast.

Usually, lumber schooners were the only connecters between the lumber ports and the major cities. They brought all types of supplies to the ports and returned with boards, farm produce, and even livestock. Most of the hulls were built on the Pacific Coast and towed to San Francisco loaded with cargo for finishing.

The Redwood Coast is dominated by cliffs and bluffs uplifted from the ocean floor by waves and currents from marine terraces. Since there are few rivers to create ports, the topography made it difficult to handle cargo.

Loading the Ships

There were four major methods of loading ships at dog-holes: lightering, slide, apron or gravity chutes, wire or trapeze chutes, and wharfing.

At first shippers used lighters to ferry cargo out to anchored ships,but this was a slow process. By 1860 a gravity chute called an apron or slide chute was developed. It consisted of an A-frame on the bluff and an apron that could be adjusted to the height of the ships’ decks. Lumbermen sent down cargo from the bluff, which was as high as 150 feet, by the chute powered by gravity. A hinged gate covered with iron rode in the chute governed the speed of the wood. A primitive brake called a clapper provided additional control over the speed. It was a moveable plank tongue positioned on the outer end of the apron. It was the responsibility of the clapperman to regulate the speed by a lever. It was dangerous work; if the seaman slipped or the brakeman was slow, the lumber could kill or injure the crew member.

Mill operators generally built their lumber loading facilities on the lee (usually the south) side of a point. This allowed the land to break the force of the waves and caused the direction of the swells to roll straight into the cove. Schooners moored with their bows pointed directly into the waves so that they pitched (the ship going up and down along its long axis) but did not roll (going up and down along its crosswise axis). This made loading easier.

Lumber Chutes

Mooring under a cliff to a buoy or by anchor, the ship would receive cargo down an apron chute or, later, a wire chute. It usually took two days to load. All these ports were full of rocks both hidden and exposed. There were undertows and cross-rip currents and continual changing sandbars. The dog-hole operators obtained franchises to build and manage the chutes. When a ship entered a port, it moored to a buoy (often a log anchored to the bottom) and would be warped or winched into position for loading. A ship’s boat, crewed by three seamen and the second mate, carried the eight inch mooring lines to the buoy. The gravity chutes were troughs allowing cargo to be sent down a cliff to a ship. Besides bagged goods, the chutes were used to load more exotic cargo, such as live hogs. The wire chute was a big improvement over the gravity chutes. They could load an entire sling of lumber at one time while the apron chutes could only load board by board. The wires could be used to discharge, and load, cargo. Chutes were a West Coast invention because of the high cliffs along the coast and the lack of harbors. Where prevailing weather conditions permitted, shippers built wharves allowing the ships to come along side and load directly from the dock.

The wire chutes permitted ships with deeper drafts to load since they did not need to approach so close to shore. The wires continued in use until after World War I and were discontinued by the start of World War II.


Addional Readings

Walter A. Jackson. The Doghole Schooners. Volcano, California: The California Traveler, 1969.

Wallace E. Martin,compiler. Sail & Steam on the Northern California Coast: 1850-1900. San Francisco: National Maritime Museum Association in Cooperation with the Golden Gate National Recreation Area. 1983.

Jack McNairn and Jerry MacMullen. Ships of the Redwood Coast. Stanford: Stanford University Press, 1946.

Gordon Newell and Joe Williamson. Pacific Lumber Ships. Seattle: Superior Publishing, 1960.

Terrence Ryan, (Fall 2010). "The Development of Pacific Coast Lumber Ships." Nautical Research Journal (Cuba, New York: Nautical Research Guild Inc.) 55 (3): 141–160. ISSN 0738-7245. OCLC 664215837.

Terrence Ryan,(Fall 2009). "The Pacific Coast Lumber Trade." The California Territorial Quarterly (Paradise, California: Bill & Penny Anderson) (79): 24–35. ISSN 1080-7594


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Iditarod Trail Sled Dog Race — The Iditarod Trail Sled Dog Race, usually just called the Iditarod , is an annual sled dog race in Alaska, where mushers and teams of typically 16 dogs cover 1,161 miles (1868 km) in eight to fifteen days from Willow to Nome. The Iditarod began… …   Wikipedia

  • West coast lumber trade — The West coast lumber trade was a maritime trade route on the west coast of the United States. It carried lumber from the coast of Washington, Oregon, and Northern California to the port of San Francisco.As late as the California Gold Rush, New… …   Wikipedia

  • Antarctica — /ant ahrk ti keuh, ahr ti /, n. the continent surrounding the South Pole: almost entirely covered by an ice sheet. ab. 5,000,000 sq. mi. (12,950,000 sq. km). Also called Antarctic Continent. * * * Antarctica Introduction Antarctica Background:… …   Universalium

  • India — /in dee euh/, n. 1. Hindi, Bharat. a republic in S Asia: a union comprising 25 states and 7 union territories; formerly a British colony; gained independence Aug. 15, 1947; became a republic within the Commonwealth of Nations Jan. 26, 1950.… …   Universalium

  • United States — a republic in the N Western Hemisphere comprising 48 conterminous states, the District of Columbia, and Alaska in North America, and Hawaii in the N Pacific. 267,954,767; conterminous United States, 3,022,387 sq. mi. (7,827,982 sq. km); with… …   Universalium

  • George Dewey — Infobox Military Person name= George Dewey born= birth date|1838|12|26 died= death date and age|1917|1|16|1838|12|26 placeofbirth=Montpelier, Vermont placeofdeath=Washington, D.C. caption= nickname= allegiance=flagicon|USA United States of… …   Wikipedia

  • arctic — arctically, adv. /ahrk tik/ or, esp. for 7, /ahr tik/, adj. 1. (often cap.) of, pertaining to, or located at or near the North Pole: the arctic region. 2. coming from the North Pole or the arctic region: an arctic wind. 3. characteristic of the… …   Universalium

  • Dates of 2006 — ▪ 2007 January Keeping America competitive requires affordable energy. And here we have a serious problem. America is addicted to oil, which is often imported from unstable parts of the world. U.S. Pres. George W. Bush, in his state of the union… …   Universalium

  • arts, East Asian — Introduction       music and visual and performing arts of China, Korea, and Japan. The literatures of these countries are covered in the articles Chinese literature, Korean literature, and Japanese literature.       Some studies of East Asia… …   Universalium

  • Dates of 2004 — ▪ 2005 January It turns out we were all wrong, probably, in my judgment. David Kay, former U.S. chief weapons inspector in Iraq, in testimony to the U.S. Senate Armed Services Committee, January 28 January 1              Haitian Pres. Jean… …   Universalium