Laser cooling

Laser cooling

Laser cooling refers to the number of techniques in which atomic and molecular samples are cooled through the interaction with one or more laser light fields. The first example of laser cooling, and also still the most common method of laser cooling (so much so that it is still often referred to as 'laser cooling') is Doppler cooling.

Other methods of laser cooling include:

Contents

Doppler cooling

Doppler cooling, which is usually accompanied by a magnetic trapping force to give a magneto-optical trap, is by far the most common method of laser cooling. It is used to cool low density gasses down to the Doppler cooling limit, which for Rubidium 85 is around 150 microkelvin. As Doppler cooling requires a very particular energy level structure, known as a closed optical loop, the method is limited to a small handful of elements.

In Doppler cooling, the frequency of light is tuned slightly below an electronic transition in the atom. Because the light is detuned to the "blue" (i.e. at higher frequency) of the transition, the atoms will absorb more photons if they move towards the light source, due to the Doppler effect. Thus if one applies light from two opposite directions, the atoms will always scatter more photons from the laser beam pointing opposite to their direction of motion. In each scattering event the atom loses a momentum equal to the momentum of the photon. If the atom, which is now in the excited state, emits a photon spontaneously, it will be kicked by the same amount of momentum but in a random direction. The result of the absorption and emission process is to reduce the speed of the atom, provided its initial speed is larger than the recoil velocity from scattering a single photon. If the absorption and emission are repeated many times, the mean velocity, and therefore the kinetic energy of the atom will be reduced. Since the temperature of an ensemble of atoms is a measure of the random internal kinetic energy, this is equivalent to cooling the atoms.

Other methods of laser cooling

Several somewhat similar processes are also referred to as laser cooling, in which photons are used to pump heat away from a material and thus cool it. The phenomenon has been demonstrated via anti-Stokes fluorescence, and both electroluminescent upconversion and photoluminescent upconversion have been studied as means to achieve the same effects. In many of these, the coherence of the laser light is not essential to the process, but lasers are typically used to achieve a high irradiance.

Uses

Laser cooling is primarily used for experiments in Quantum Physics to achieve temperatures of near absolute zero (−273.15°C, −459.67°F). This is done to observe the unique quantum effects that can only occur at this heat level. Generally, laser cooling has been only used on the atomic level to cool down elements. This may soon change, as a new breakthrough in the technology has successfully cooled a macro-scale object to near absolute zero.[1]

See also

References

  1. ^ Massachusetts Institute of Technology (2007, April 8). Laser-cooling Brings Large Object Near Absolute Zero. ScienceDaily. Retrieved January 14, 2011, from http://www.sciencedaily.com/releases/2007/04/070406171036.htm

2^D.J. Wineland, R.E. Drullinger and F.L. Walls (1978). "Radiation-pressure cooling of bound resonant absorbers". Phys. Rev. Lett. 40: 1639. Bibcode 1978PhRvL..40.1639W. doi:10.1103/PhysRevLett.40.1639. http://tf.nist.gov/general/pdf/128.pdf. 

3^W. Neuhauser, M. Hohenstatt, P. Toschek and H. Dehmelt (1978). "Optical-sideband cooling of visible atom cloud confined in parabolic well". Phys. Rev. Lett. 41: 233. Bibcode 1978PhRvL..41..233N. doi:10.1103/PhysRevLett.41.233. 

4^Nobel Lecture by William D. Phillips, Dec 8, 1997.

5^Foot, C.J. Atomic Physics. Oxford University Press (2005).


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • laser cooling — noun the process of using the force exerted by a laser to reduce the temperature of a gas, or the spread of velocities of a beam of atoms …   Wiktionary

  • Cooling — is the transfer of thermal energy via thermal radiation, heat conduction or convection. It may also refer to: Contents 1 Techniques 2 Devices 3 Other 4 Places …   Wikipedia

  • Laser — For other uses, see Laser (disambiguation). United States Air Force laser experiment …   Wikipedia

  • Laser applications — There are many scientific, military, medical and commercial laser applications which have been developed since the invention of the laser in the 1958. The coherency, high monochromaticity, and ability to reach extremely high powers are all… …   Wikipedia

  • Laser-Kühlung — Laserkühlung ist ein Verfahren, um einzelne Atome mit Hilfe von Laserlicht stark abzukühlen (z. B. zum Erzeugen von optischen Melassen, einer Vorstufe des Bose Einstein Kondensats). Die Grundidee ist folgende: Die Temperatur eines Gases drückt… …   Deutsch Wikipedia

  • Laser engraving — is the practice of using lasers to engrave or mark an object. The technique can be very technical and complex, and often a computer system is used to drive the movements of the laser head. Despite this complexity, very precise and clean… …   Wikipedia

  • Laser beam welding — (LBW) is a welding technique used to join multiple pieces of metal through the use of a laser. The beam provides a concentrated heat source, allowing for narrow, deep welds and high welding rates. The process is frequently used in high volume… …   Wikipedia

  • Laser pumping — is the act of energy transfer from an external source into the gain medium of a laser. The energy is absorbed in the medium, producing excited states in its atoms. When the number of particles in one excited state exceeds the number of particles… …   Wikipedia

  • Laser cutting — process on a sheet of steel. CAD (top) and stainless steel laser cut part (bottom) Laser cutting is a technology that uses a laser to cut materials, an …   Wikipedia

  • Laser hair removal — Epilation by laser was performed experimentally for about 20 years before it became commercially available in the mid 1990s. Intense Pulsed Light (IPL) epilators, though technically not a laser, use xenon flash lamps that emit full spectrum light …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”