Cryogenic nitrogen plant

Cryogenic nitrogen plant

Nitrogen, as an element of great technical importance, can be produced in a cryogenic nitrogen plant with a purity of more than 99.9999%.

Air inside a distillation column is separated at cryogenic temperatures (about 100K/-173°C) to produce high purity nitrogen with 1ppm of impurities. The process is based on the air separation, which was invented by Dr. Carl von Linde in 1895.



GAN 800 Plant manufactured by Linde CryoPlants Ltd., production rate of 800Nm3/hour

The main purpose of a cryogenic nitrogen plant is to provide a customer with high purity gaseous nitrogen (GAN). In addition liquid nitrogen (LIN) is produced simultaneously and is typically 10% of the gas production. High purity liquid nitrogen produced by cryogenic plants is stored in a local tank and used as a strategic reserve. This liquid can be vaporised to cover peaks in demand or for use when the nitrogen plant is offline. Typical cryogenic nitrogen plants range from 250 Nm3/hour to very large range plants such as the Cantarell Field plant in Mexico with a daily capacity of 63.000 tonnes of nitrogen a day.[1]

Plant Modules

A cryogenic nitrogen plant comprises:

Warm End (W/E) Container


Storage and Backup System

  • Liquid nitrogen tank
  • Vapouriser

How the plant works

Flowsheet GAN Plant Linde Cryoplants Ltd.

Warm end process

Atmospheric air is roughly filtered and pressurised by a compressor, which provides the product pressure to deliver to the customer. The amount of air sucked in depends on the customer’s nitrogen demand.

The Air Receiver collects condensate and minimises pressure drop. The dry and compressed air leaves the air to refrigerant heat exchanger at about 10°C.

To clean the process air further, there are different stages of filtration. First of all, more condensate is removed, than a Coalescing filter acts as a gravity filter and finally an adsorber filled with activated carbon removes some hydrocarbons.

The last unit process in the warm end container is the thermal swing adsorber (TSA). The Air purification unit cleans the compressed process air by removing any residual water vapour, carbon dioxide and hydrocarbons. It comprises two vessels, valves and exhaust to allow the changeover of vessels. While one of the TSA beds is on stream the second one is regenerated by the oxygen rich waste flow, which is vented through a silencer into the ambient environment.

Coldbox process

After leaving the air purification unit, the process air enters the main heat exchanger, where it is rapidly cooled down to -165°C. All residual impurities (e.g. CO2) freeze out, and the process air enters at the bottom of the distillation column partially liquefied.

The distillation column comprises a liquid distributor at the top, several meters of structured packing with liquid redistributors and a bottom reservoir for the liquid flowing down the column. Pure nitrogen is separated on top of the column and oxygen enriched liquid remains at the bottom.

The oxygen enriched liquid passes to the condenser by means of a Joule-Thomson expansion valve, which flushes off some of the liquid as vapour and cools the remaining liquid. This sub cooled liquid condenses some of the pure nitrogen gas stream coming off the top of the column. Part of the condensed nitrogen is passed into the distillation column to maintain the purity, the remaining liquid is stored in a local storage tank as a strategic reserve. Nitrogen that is not condensed passes through the main heat exchanger and becomes the product delivered to the costumer.

The waste gas, which is subsequently generated as the sub- cooled oxygen enriched liquid is vaporised in the condenser, returns to the APU where it is used to regenerate the desiccant. Refrigeration for the process is provided by air brake expansion turbines located at the base of the cold box. A stream of high-pressure gas from the heat exchangers (-110°C) is expanded to low pressure and cooled in the turbine. The cooled air (-160°C) returns to the waste stream of the heat exchangers to provide refrigeration.

The energy that is removed by the turbine appears as heat in the turbine cooling system.

Back up process

Liquid Nitrogen produced from the cold box transfers into the liquid storage tank. An ambient air vaporiser is used to vaporise stored liquid during peak demand. A pressure control panel senses the demand for gaseous nitrogen and regulates the gas flow into the end-users pipeline to maintain a present line-pressure.

Applications for high purity nitrogen production


External links

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Cryogenic oxygen plant — A cryogenic oxygen plant is an industrial facility that creates molecular oxygen at relatively high purity. Oxygen is the most common element in the world and the second largest industrial gas. The purity of oxygen can only be generated by… …   Wikipedia

  • Cryogenic engineering — is a branch of mechanical engineering which deals with cryogenics. and related very low temperature processes such as air liquefaction, cryogenic engines (for rocket propulsion), cryogenic surgery, et cetera. Generally, temperatures below the… …   Wikipedia

  • Nitrogen generator — Nitrogen generators and stations are stationary or mobile air to nitrogen production complexes. In advanced economies, membrane nitrogen plants have almost ousted alternative processes of nitrogen generation in all cases where nitrogen is not… …   Wikipedia

  • Nitrogen — carbon ← nitrogen → oxygen ↑ N ↓ P …   Wikipedia

  • Cryogenic grinding — Cooling system of a cryogenic grinder An Example of a solenoid …   Wikipedia

  • nitrogen group element — ▪ chemical elements Introduction  any of the chemical elements that constitute Group Va of the periodic table (see Figure >). The group consists of nitrogen (N), phosphorus (P), arsenic (As), antimony (Sb), and bismuth (Bi). The elements share… …   Universalium

  • Oxygen plant — Oxygen absorption plants is the modern non cryogenic gas separation system. Plants based on absorption and sometimes membrane technology. Contents 1 Application 2 Adsorption technology 2.1 Adsorption principle …   Wikipedia

  • Natural-gas processing — is a complex industrial process designed to clean raw natural gas by separating impurities and various non methane hydrocarbons and fluids to produce what is known as pipeline quality dry natural gas.[1] Contents 1 Background 2 Types of raw… …   Wikipedia

  • Glossary of fuel cell terms — The Glossary of fuel cell terms lists the definitions of many terms used within the fuel cell industry. The terms in this glossary may be used by fuel cell industry associations, in education material and fuel cell codes and standards to name but …   Wikipedia

  • Natural gas processing — plants, or fractionators, are used to purify the raw natural gas extracted from underground gas fields and brought up to the surface by gas wells. The processed natural gas, used as fuel by residential, commercial and industrial consumers, is… …   Wikipedia