- Cross-validation (statistics)
Cross-validation, sometimes called rotation estimation, is a technique for assessing how the results of a statistical analysis will generalize to an independent data set. It is mainly used in settings where the goal is prediction, and one wants to estimate how accurately a predictive model will perform in practice. One round of cross-validation involves partitioning a sample of data into complementary subsets, performing the analysis on one subset (called the training set), and validating the analysis on the other subset (called the validation set or testing set). To reduce variability, multiple rounds of cross-validation are performed using different partitions, and the validation results are averaged over the rounds.
Cross-validation is important in guarding against testing hypotheses suggested by the data (called "Type III errors"), especially where further samples are hazardous, costly or impossible to collect (see uncomfortable science).
Purpose of cross validation
Suppose we have a model with one or more unknown parameters, and a data set to which the model can be fit (the training data set). The fitting process optimizes the model parameters to make the model fit the training data as well as possible. If we then take an independent sample of validation data from the same population as the training data, it will generally turn out that the model does not fit the validation data as well as it fits the training data. This is called overfitting, and is particularly likely to happen when the size of the training data set is small, or when the number of parameters in the model is large. Cross-validation is a way to predict the fit of a model to a hypothetical validation set when an explicit validation set is not available.
Linear regression provides a simple illustration of overfitting. In linear regression we have real response values Y1, ..., Yn, and vector covariates X1, ..., Xp. We can use least squares to fit a hyperplane a + b1X1 + ... + bpXp between the Y and X data, and then assess the fit using the mean squared error (MSE)
where Xji is the value of variable Xj corresponding to the ith response value Yi.
It can be shown under mild assumptions that the expected value of the MSE for the training set is (n − p − 1)/(n + p + 1) < 1 times the expected value of the MSE for the validation set (the expected value is taken over the distribution of training sets). Thus if we fit the model and compute the MSE on the training set, we will get an optimistically biased assessment of how well the model will fit an independent data set. This biased estimate is called the in-sample estimate of the fit, whereas the cross-validation estimate is an out-of-sample estimate.
Since in linear regression it is possible to mathematically compute the factor (n − p − 1)/(n + p + 1) by which the training MSE underestimates the validation MSE, cross-validation is not practically useful in that setting. However in most other regression procedures (e.g. logistic regression), there is no simple formula to make this adjustment. Cross-validation is a generally applicable way to predict the performance of a model on a validation set using computation in place of mathematical analysis.
Common types of cross-validation
In k-fold cross-validation, the original sample is randomly partitioned into k subsamples. Of the k subsamples, a single subsample is retained as the validation data for testing the model, and the remaining k − 1 subsamples are used as training data. The cross-validation process is then repeated k times (the folds), with each of the k subsamples used exactly once as the validation data. The k results from the folds then can be averaged (or otherwise combined) to produce a single estimation. The advantage of this method over repeated random sub-sampling is that all observations are used for both training and validation, and each observation is used for validation exactly once. 10-fold cross-validation is commonly used.
In stratified k-fold cross-validation, the folds are selected so that the mean response value is approximately equal in all the folds. In the case of a dichotomous classification, this means that each fold contains roughly the same proportions of the two types of class labels.
This is the simplest variation of k-fold cross-validation. For each fold, we randomly assign data points to two sets d0 and d1, so that both sets are equal size (this is usually implemented as shuffling the data array and then splitting in two). We then train on d0 and test on d1, followed by training on d1 and testing on d0.
This has the advantage that our training and test sets are both large, and each data point is used for both training and validation on each fold.
Repeated random sub-sampling validation
This method randomly splits the dataset into training and validation data. For each such split, the model is fit to the training data, and predictive accuracy is assessed using the validation data. The results are then averaged over the splits. The advantage of this method (over k-fold cross validation) is that the proportion of the training/validation split is not dependent on the number of iterations (folds). The disadvantage of this method is that some observations may never be selected in the validation subsample, whereas others may be selected more than once. In other words, validation subsets may overlap. This method also exhibits Monte Carlo variation, meaning that the results will vary if the analysis is repeated with different random splits.
In a stratified variant of this approach, the random samples are generated in such a way that the mean response value (i.e. the dependent variable in the regression) is equal in the training and testing sets. This is particularly useful if the responses are dichotomous with an unbalanced representation of the two response values in the data.
As the name suggests, leave-one-out cross-validation (LOOCV) involves using a single observation from the original sample as the validation data, and the remaining observations as the training data. This is repeated such that each observation in the sample is used once as the validation data. This is the same as a K-fold cross-validation with K being equal to the number of observations in the original sample. Leave-one-out cross-validation is usually very expensive from a computational point of view because of the large number of times the training process is repeated.
Measures of fit
The goal of cross-validation is to estimate the expected level of fit of a model to a data set that is independent of the data that were used to train the model. It can be used to estimate any quantitative measure of fit that is appropriate for the data and model. For example, for binary classification problems, each case in the validation set is either predicted correctly or incorrectly. In this situation the misclassification error rate can be used to summarize the fit, although other measures like positive predictive value could also be used. When the value being predicted is continuously distributed, the mean squared error, root mean squared error or median absolute deviation could be used to summarize the errors.
Cross-validation can be used to compare the performances of different predictive modeling procedures. For example, suppose we are interested in optical character recognition, and we are considering using either support vector machines (SVM) or k nearest neighbors (KNN) to predict the true character from an image of a handwritten character. Using cross-validation, we could objectively compare these two methods in terms of their respective fractions of misclassified characters. If we simply compared the methods based on their in-sample error rates, the KNN method would likely appear to perform better, since it is more flexible and hence more prone to overfitting compared to the SVM method.
Cross-validation can also be used in variable selection. Suppose we are using the expression levels of 20 proteins to predict whether a cancer patient will respond to a drug. A practical goal would be to determine which subset of the 20 features should be used to produce the best predictive model. For most modeling procedures, if we compare feature subsets using the in-sample error rates, the best performance will occur when all 20 features are used. However under cross-validation, the model with the best fit will generally include only a subset of the features that are deemed truly informative.
Suppose we choose a measure of fit F, and use cross-validation to produce an estimate F* of the expected fit EF of a model to an independent data set drawn from the same population as the training data. If we imagine sampling multiple independent training sets following the same distribution, the resulting values for F* will vary. The statistical properties of F* result from this variation.
The cross-validation estimator F* is very nearly unbiased for EF. The reason that it is slightly biased is that the training set in cross-validation is slightly smaller than the actual data set (e.g. for LOOCV the training set size is n − 1 when there are n observed cases). In nearly all situations, the effect of this bias will be conservative in that the estimated fit will be slightly biased in the direction suggesting a poorer fit. In practice, this bias is rarely a concern.
The variance of F* can be large. For this reason, if two statistical procedures are compared based on the results of cross-validation, it is important to note that the procedure with the better estimated performance may not actually be the better of the two procedures (i.e. it may not have the better value of EF). Some progress has been made on constructing confidence intervals around cross-validation estimates, but this is considered a difficult problem.
Most forms of cross-validation are straightforward to implement as long as an implementation of the prediction method being studied is available. In particular, the prediction method need only be available as a "black box" – there is no need to have access to the internals of its implementation. If the prediction method is expensive to train, cross-validation can be very slow since the training must be carried out repeatedly. In some cases such as least squares and kernel regression, cross-validation can be sped up significantly by pre-computing certain values that are needed repeatedly in the training, or by using fast "updating rules" such as the Sherman–Morrison formula. However one must be careful to preserve the "total blinding" of the validation set from the training procedure, otherwise bias may result. An extreme example of accelerating cross-validation occurs in linear regression, where the results of cross-validation have a closed-form expression known as the prediction residual error sum of squares (PRESS).
Relationship to other forms of validation
In "true validation," or "holdout validation," a subset of observations is chosen randomly from the initial sample to form a validation or testing set, and the remaining observations are retained as the training data. Normally, less than a third of the initial sample is used for validation data. This would generally not be considered to be cross-validation since only a single partition of the data into training and testing sets is used.
Limitations and misuse
Cross-validation only yields meaningful results if the validation set and test set are drawn from the same population. In many applications of predictive modeling, the structure of the system being studied evolves over time. This can introduce systematic differences between the training and validation sets. For example, if a model for predicting stock values is trained on data for a certain five year period, it is unrealistic to treat the subsequent five year period as a draw from the same population. As another example, suppose a model is developed to predict an individual's risk for being diagnosed with a particular disease within the next year. If the model is trained using data from a study involving only a specific population group (e.g. young people or males), but is then applied to the general population, the cross-validation results from the training set could differ greatly from the actual predictive performance.
If carried out properly, and if the validation set and training set are from the same population, cross-validation is nearly unbiased. However there are many ways that cross-validation can be misused. If it is misused and a true validation study is subsequently performed, the prediction errors in the true validation are likely to be much worse than would be expected based on the results of cross-validation.
These are some ways that cross-validation can be misused:
- By using cross-validation to assess several models, and only stating the results for the model with the best results.
- By performing an initial analysis to identify the most informative features using the entire data set – if feature selection or model tuning is required by the modeling procedure, this must be repeated on every training set. If cross-validation is used to decide which features to use, an inner cross-validation to carry out the feature selection on every training set must be performed.
- By allowing some of the training data to also be included in the test set – this can happen due to "twinning" in the data set, whereby some exactly identical or nearly identical samples are present in the data set.
Notes and references
- ^ Geisser, Seymour (1993). Predictive Inference. New York: Chapman and Hall. ISBN 0412034719.
- ^ Kohavi, Ron (1995). "A study of cross-validation and bootstrap for accuracy estimation and model selection". Proceedings of the Fourteenth International Joint Conference on Artificial Intelligence 2 (12): 1137–1143. http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.48.529. (Morgan Kaufmann, San Mateo)
- ^ Devijver, P. A., and J. Kittler, Pattern Recognition: A Statistical Approach, Prentice-Hall, London, 1982
- ^ Mosteller, Frederick (1948). "A k-sample slippage test for an extreme population". Annals of Mathematical Statistics 19 (1): 58–65. doi:10.1214/aoms/1177730290. JSTOR 2236056. MR0024116.
- ^ GJ, McLachlan; K.A. Do, C. Ambroise (2004). Analyzing microarray gene expression data. Wiley.
- ^ Picard, Richard; Cook, Dennis (1984). "Cross-Validation of Regression Models". Journal of the American Statistical Association 79 (387): 575–583. doi:10.2307/2288403. JSTOR 2288403.
- ^ a b Efron, Bradley; Tibshirani, Robert (1997). "Improvements on cross-validation: The .632 + Bootstrap Method". Journal of the American Statistical Association 92 (438): 548–560. doi:10.2307/2965703. JSTOR 2965703. MR1467848.
- ^ Stone, M (1977). "Asymptotics for and against cross-validation". Biometrika 64 (1): 29–35. doi:10.1093/biomet/64.1.29. JSTOR 2335766. MR0474601.
- ^ "Tutorial 12". Decision Trees Interactive Tutorial and Resources. Archived from the original on 2006-06-23. http://web.archive.org/web/20060623055814/http://decisiontrees.net/node/36. Retrieved 2006-06-21.
Statistics Descriptive statisticsSummary tables Data collectionDesigning studiesUncontrolled studies Statistical inferenceFrequentist inferenceSpecific tests Correlation and regression analysisNon-standard predictorsPartition of variance Categorical, multivariate, time-series, or survival analysis Applications
Wikimedia Foundation. 2010.
Look at other dictionaries:
Cross-validation — could refer to: Cross validation (statistics), a technique for estimating the performance of a predictive model; Cross validation (analytical chemistry), the practice of confirming an experimental finding by repeating the experiment using an… … Wikipedia
cross-validation — /kraws val i day sheuhn, kros /, n. Statistics. a process by which a method that works for one sample of a population is checked for validity by applying the method to another sample from the same population. * * * … Universalium
cross-validation — /kraws val i day sheuhn, kros /, n. Statistics. a process by which a method that works for one sample of a population is checked for validity by applying the method to another sample from the same population … Useful english dictionary
Resampling (statistics) — In statistics, resampling is any of a variety of methods for doing one of the following: # Estimating the precision of sample statistics (medians, variances, percentiles) by using subsets of available data (jackknife) or drawing randomly with… … Wikipedia
List of statistics topics — Please add any Wikipedia articles related to statistics that are not already on this list.The Related changes link in the margin of this page (below search) leads to a list of the most recent changes to the articles listed below. To see the most… … Wikipedia
Degrees of freedom (statistics) — In statistics, the number of degrees of freedom is the number of values in the final calculation of a statistic that are free to vary. Estimates of statistical parameters can be based upon different amounts of information or data. The number… … Wikipedia
Regression model validation — In statistics, model validation is possibly the most important step in the model building sequence. It is also one of the most overlooked. Often the validation of a model seems to consist of nothing more than quoting the R2… … Wikipedia
Bootstrapping (statistics) — In statistics, bootstrapping is a modern, computer intensive, general purpose approach to statistical inference, falling within a broader class of resampling methods.Bootstrapping is the practice of estimating properties of an estimator (such as… … Wikipedia
Official statistics — on Germany in 2010, published in UNECE Countries in Figures 2011. Official statistics are statistics published by government agencies or other public bodies such as international organizations. They provide quantitative or qualitative information … Wikipedia
Descriptive statistics — quantitatively describe the main features of a collection of data. Descriptive statistics are distinguished from inferential statistics (or inductive statistics), in that descriptive statistics aim to summarize a data set, rather than use the… … Wikipedia