Convection–diffusion equation


Convection–diffusion equation

The convection–diffusion equation is a parabolic partial differential equation combining the diffusion equation and the advection equation, which describes physical phenomena where particles or energy (or other physical quantities) are transferred inside a physical system due to two processes: diffusion and convection. In its simplest form (when the diffusion coefficient and the convection velocity are constant and there are no sources or sinks) the equation takes the form: [1] [2][3]

\big. \frac{\partial c}{\partial t}  = D\, \nabla ^2 c - \vec{v} \cdot \nabla c.

The two terms on the right hand side represent different physical processes: the first corresponds to normal diffusion while the second describes convection or advection – which is why the equation is also known as the advection–diffusion equation. c is the variable of interest (species concentration for mass transfer, temperature for heat transfer), the constant D is the diffusivity for mass or heat transfer, and  \vec{v} is the velocity.

Stationary convection-diffusion equation refers to this same equation with the time derivative omitted.

Derivation

The convection–diffusion equation can be derived in a straightforward way from the continuity equation, which states that the rate of change for a scalar quantity in a differential control volume is given by flow and diffusion into and out of that part of the system along with any generation or consumption inside the control volume:

 \frac{\partial c}{\partial t} + \nabla\cdot\vec{j} = s,

where \vec{j} is the total flux and s is a net volumetric source for c. This flux can be written using the phenomenological Fick's first law, which assumes that the flux of the diffusing material relative to the bulk motion in any part of the system is proportional to the local concentration gradient. When there is convection or flow, the total flux in a stationary coordinate system is given by the sum of the diffusive flux in the material frame and what is known as the convective flux \vec{v}\, c .

Combining these two terms the total flux becomes:

\vec{j}=-D\,\nabla c + \vec{v} c.

The substitution of this equation into the continuity equation gives the general form of the convection–diffusion equation:

 \frac{\partial c}{\partial t} + \nabla\cdot \left(\vec{-D\,\nabla c + \vec{v}\, c}\right) = s.

In general, D,  \vec{v} , and s may vary with space and time. In cases in which they depend on concentration as well, the equation becomes nonlinear, giving rise to many distinctive mixing phenomena such as Rayleigh–Bénard convection when  \vec{v} depends on temperature in the heat transfer formulation and reaction-diffusion pattern formation when s depends on concentration in the mass transfer formulation.

See also

References

  1. ^ Bejan A (2004). Convection Heat Transfer. 
  2. ^ Bird, Stewart, Lightfoot (1960). Transport Phenomena. 
  3. ^ Probstein R (1994). Physicochemical Hydrodynamics. 
  • Granville Sewell, The Numerical Solution of Ordinary and Partial Differential Equations, Academic Press (1988). ISBN 0-12-637475-9

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Convection diffusion equation — The Convection Diffusion equation is a parabolic partial differential equation. It is very important for the description of physical phenomena where particles or energy (or other physical quantities) are transferedinside a physical system due to… …   Wikipedia

  • Convection — This figure shows a calculation for thermal convection in the Earth s mantle. Colors closer to red are hot areas and colors closer to blue are cold areas. A hot, less dense lower boundary layer sends plumes of hot material upwards, and likewise,… …   Wikipedia

  • Diffusion — This article is about the generic concept of the time dependent random process. For other uses, see Diffusion (disambiguation). Diffusion describes the spread of particles through random motion from regions of higher concentration to regions of… …   Wikipedia

  • Diffusion de la chaleur — Conduction thermique La conduction thermique (ou diffusion thermique) est un mode de phénomène de transfert thermique provoqué par une différence de température entre deux régions d un même milieu, ou entre deux milieux en contact, et se… …   Wikipédia en Français

  • Diffusion thermique — Conduction thermique La conduction thermique (ou diffusion thermique) est un mode de phénomène de transfert thermique provoqué par une différence de température entre deux régions d un même milieu, ou entre deux milieux en contact, et se… …   Wikipédia en Français

  • Reaction–diffusion system — Reaction–diffusion systems are mathematical models which explain how the concentration of one or more substances distributed in space changes under the influence of two processes: local chemical reactions in which the substances are transformed… …   Wikipedia

  • Molecular diffusion — This article is about spontaneous dispersion of mass. For a more generic treatment of diffusion, see Diffusion. Diffusion from a microscopic and macroscopic point of view. Initially, there are solute molecules on the left side of a barrier… …   Wikipedia

  • Generic scalar transport equation — The generic scalar transport equation is a general partial differential equation that describes transport phenomena such as heat transfer, mass transfer, fluid dynamics (momentum transfer), etc. A general form of the equation is: frac{partial… …   Wikipedia

  • Réaction-diffusion — Système à réaction diffusion Un système à réaction diffusion est un modèle mathématique qui décrit l évolution des concentrations d une ou plusieurs substances spatialement distribuées et soumises à deux processus : un processus de réactions …   Wikipédia en Français

  • Système à réaction-diffusion — Un système à réaction diffusion est un modèle mathématique qui décrit l évolution des concentrations d une ou plusieurs substances spatialement distribuées et soumises à deux processus : un processus de réactions chimiques locales, dans… …   Wikipédia en Français