# Non-inertial reference frame

﻿
Non-inertial reference frame

A non-inertial reference frame is a frame of reference that is under acceleration.[1] The laws of physics in such a frame do not take on their most simple form, as required by the theory of special relativity.[2][3] To explain the motion of bodies entirely within the viewpoint of non-inertial reference frames, fictitious forces (also called inertial forces, pseudo-forces[4] and d'Alembert forces) must be introduced to account for the observed motion, such as the Coriolis force or the centrifugal force, as derived from the acceleration of the non-inertial frame. [5] As stated by Goodman and Warner, "One might say that F = m a holds in any coordinate system provided the term 'force' is redefined to include the so-called 'reversed effective forces' or 'inertia forces'."[6]

## Avoiding fictitious forces in calculations

Non-inertial frames can be avoided. Of course, measurements with respect to non-inertial reference frames can be transformed to an inertial frame, incorporating directly the acceleration of the non-inertial frame as that acceleration is seen from the inertial frame.[7] This approach avoids use of fictitious forces (it is based on an inertial frame, where fictitious forces are absent, by definition) but it may be less convenient from an intuitive, observational, and even a calculational viewpoint.[8] As pointed out by Ryder for the case of rotating frames as used in meteorology:[9]

A simple way of dealing with this problem is, of course, to transform all coordinates to an inertial system. This is, however, sometimes inconvenient. Suppose, for example, we wish to calculate the movement of air masses in the earth's atmosphere due to pressure gradients. We need the results relative to the rotating frame, the earth, so it is better to stay within this coordinate system if possible. This can be achieved by introducing fictitious (or "non-existent") forces which enable us to apply Newton's Laws of Motion in the same way as in an inertial frame.
—Peter Ryder, Classical Mechanics, pp. 78-79

## Detection of a non-inertial frame: need for fictitious forces

That a given frame is non-inertial can be detected by its need for fictitious forces to explain observed motions.[10][11][12][13][14] For example, the rotation of the Earth can be observed using a Foucault pendulum.[15] The rotation of the Earth seemingly causes the pendulum to change its plane of oscillation (which plane actually is fixed in space) because the surroundings of the pendulum move with the Earth. As seen from an Earth-bound (non-inertial) frame of reference, the explanation of this apparent change in orientation requires the introduction of the fictitious Coriolis force.

Another famous example is that of the tension in the string between two spheres rotating about each other.[16][17] In that case, prediction of the measured tension in the string based upon the motion of the spheres as observed from a rotating reference frame requires the rotating observers to introduce a fictitious centrifugal force.

In this connection, it may be noted that a change in coordinate system, for example , from Cartesian to polar, if implemented without any change in relative motion, does not cause the appearance of fictitious forces, despite the fact that the form of the laws of motion varies from one type of curvilinear coordinate system to another.

## Fictitious forces in curvilinear coordinates

A different use of the term "fictitious force" often is used in curvilinear coordinates, particularly polar coordinates. To avoid confusion, this distracting ambiguity in terminologies is pointed out here. These so-called "forces" are non-zero in all frames of reference, inertial or non-inertial, and do not transform as vectors under rotations and translations of the coordinates (as all Newtonian forces do, fictitious or otherwise).

This incompatible use of the term "fictitious force" is unrelated to non-inertial frames. These so-called "forces" are defined by determining the acceleration of a particle within the curvilinear coordinate system, and then separating the simple double-time derivatives of coordinates from the remaining terms. These remaining terms then are called "fictitious forces". More careful usage calls these terms "generalized fictitious forces" to indicate their connection to the generalized coordinates of Lagrangian mechanics. The application of Lagrangian methods to polar coordinates can be found here.

## Relativistic point of view

### Frames and flat spacetime

If a region of spacetime is declared to be Euclidean, and effectively free from obvious gravitational fields, then if an accelerated coordinate system is overlaid onto the same region, it can be said that a uniform fictitious field exists in the accelerated frame (we reserve the word gravitational for the case in which a mass is involved). An object accelerated to be stationary in the accelerated frame will "feel" the presence of the field, and they will also be able to see environmental matter with inertial states of motion (stars, galaxies, etc.) to be apparently falling "downwards" in the field along curved trajectories as if the field is real.

In frame-based descriptions, this supposed field can be made to appear or disappear by switching between "accelerated" and "inertial" coordinate systems.

As the situation is modeled in finer detail, using the general principle of relativity, the concept of a frame-dependent gravitational field becomes less realistic. In these Machian models, the accelerated body can agree that the apparent gravitational field is associated with the motion of the background matter, but can also claim that the motion of the material as if there is a gravitational field, causes the gravitational field - the accelerating background matter "drags light". Similarly, a background observer can argue that the forced acceleration of the mass causes an apparent gravitational field in the region between it and the environmental material (the accelerated mass also "drags light"). This "mutual" effect, and the ability of an accelerated mass to warp lightbeam geometry and lightbeam-based coordinate systems, is referred to as frame-dragging.

Frame-dragging removes the usual distinction between accelerated frames (which show gravitational effects) and inertial frames (where the geometry is supposedly free from gravitational fields). When a forcibly-accelerated body physically "drags" a coordinate system, the problem becomes an exercise in warped spacetime for all observers.

## References and notes

1. ^ Emil Tocaci, Clive William Kilmister (1984). Relativistic Mechanics, Time, and Inertia. Springer. p. 251. ISBN 9027717699.
2. ^ Wolfgang Rindler (1977). Essential Relativity. Birkhäuser. p. 25. ISBN 354007970X.
3. ^ Ludwik Marian Celnikier (1993). Basics of Space Flight. Atlantica Séguier Frontières. p. 286. ISBN 2863321323.
4. ^ Harald Iro (2002). A Modern Approach to Classical Mechanics. World Scientific. p. 180. ISBN 9812382135.
5. ^ Albert Shadowitz (1988). Special relativity (Reprint of 1968 edition ed.). Courier Dover Publications. p. 4. ISBN 0486657434.
6. ^ Lawrence E. Goodman & William H. Warner (2001). Dynamics (Reprint of 1963 edition ed.). Courier Dover Publications. p. 358. ISBN 048642006X.
7. ^ M. Alonso & E.J. Finn (1992). Fundamental university physics. , Addison-Wesley. ISBN 0201565188.
8. ^ “The inertial frame equations have to account for VΩ and this very large centripetal force explicitly, and yet our interest is almost always the small relative motion of the atmosphere and ocean, V' , since it is the relative motion that transports heat and mass over the Earth. … To say it a little differently—it is the relative velocity that we measure when [we] observe from Earth’s surface, and it is the relative velocity that we seek for most any practical purposes.” MIT essays by James F. Price, Woods Hole Oceanographic Institution (2006). See in particular §4.3, p. 34 in the Coriolis lecture
9. ^ Peter Ryder (2007). Classical Mechanics. Aachen Shaker. pp. 78–79. ISBN 978-3-8322-6003-3.
10. ^ Raymond A. Serway (1990). Physics for scientists & engineers (3rd Edition ed.). Saunders College Publishing. p. 135. ISBN 0030313589.
11. ^
12. ^ Milton A. Rothman (1989). Discovering the Natural Laws: The Experimental Basis of Physics. Courier Dover Publications. p. 23. ISBN 0486261786.
13. ^
14. ^ Leonard Meirovitch (2004). Methods of analytical Dynamics (Reprint of 1970 edition ed.). Courier Dover Publications. p. 4. ISBN 0486432394.
15. ^ Giuliano Toraldo di Francia (1981). The Investigation of the Physical World. CUP Archive. p. 115. ISBN 052129925X.
16. ^ Louis N. Hand, Janet D. Finch (1998). Analytical Mechanics. Cambridge University Press. p. 324. ISBN 0521575729.
17. ^ I. Bernard Cohen, George Edwin Smith (2002). The Cambridge companion to Newton. Cambridge University Press. p. 43. ISBN 0521656966.

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• non-inertial reference system — neinercinė atskaitos sistema statusas T sritis fizika atitikmenys: angl. non inertial frame of reference; non inertial reference system vok. trägheitsfreies Bezugssystem, n rus. неинерциальная система отсчёта, f pranc. système de référence non… …   Fizikos terminų žodynas

• non-inertial frame of reference — neinercinė atskaitos sistema statusas T sritis fizika atitikmenys: angl. non inertial frame of reference; non inertial reference system vok. trägheitsfreies Bezugssystem, n rus. неинерциальная система отсчёта, f pranc. système de référence non… …   Fizikos terminų žodynas

• Rotating reference frame — A rotating frame of reference is a special case of a non inertial reference frame that is rotating relative to an inertial reference frame. An everyday example of a rotating reference frame is the surface of the Earth. (This article considers… …   Wikipedia

• Accelerated reference frame — In theoretical physics, an accelerated reference frame is usually a coordinate system or frame of reference, that undergoes a constant and continual change in velocity over time as judged from an inertial frame. An object in an accelerated frame… …   Wikipedia

• Local reference frame — In theoretical physics, a local reference frame (local frame) refers to a coordinate system or frame of reference that is only expected to function over a small region or a restricted region of space or spacetime. The term is most often used in… …   Wikipedia

• Inertial frame of reference — In physics, an inertial frame of reference is a frame of reference which belongs to a set of frames in which physical laws hold in the same and simplest form. According to the first postulate of special relativity, all physical laws take their… …   Wikipedia

• Non-uniform circular motion — Classical mechanics Newton s Second Law History of classical mechanics  …   Wikipedia

• Frame of reference — A frame of reference in physics, may refer to a coordinate system or set of axes within which to measure the position, orientation, and other properties of objects in it, or it may refer to an observational reference frame tied to the state of… …   Wikipedia

• Inertial navigation system — An Inertial Navigation System (INS) is a navigation aid that uses a computer and motion sensors to continuously track the position, orientation, and velocity (direction and speed of movement) of a vehicle without the need for external references …   Wikipedia