Commonly used gamma emitting isotopes

Commonly used gamma emitting isotopes

Radionuclides which emit gamma radiation are valuable in a range of different industrial, scientific and medical technologies. This article lists some common gamma-emitting radionuclides of technological importance, and their properties.


Fission products

Many artificial radionuclides of technological importance are produced as fission products within nuclear reactors. A fission product is a nucleus with approximately half the mass of a uranium or plutonium nucleus which is left over after such a nucleus has been "split" in a nuclear fission reaction.

Caesium-137 is one such radionuclide. It has a half-life of 30 years, and decays by pure beta decay to a metastable state of barium-137 (Ba-137m). Barium-137m has a half-life of minutes and is responsible for all of the gamma ray emission. The ground state of barium-137 is stable.

The gamma ray (photon) energy of Ba-137m is about 662 keV. These gamma rays can be used, for example, in radiotherapy such as for the treatment of cancer, in food irradation, or in industrial gauges or sensors. Cs-137 is not widely used for industrial radiography as other nuclides, such as cobalt-60 or iridium-192 for example, offer higher radiation output for a given volume.

Iodine-131 is another important gamma-emitting radionuclide produced as a fission product. With a short half-life of 8 days, this radioisotope is not of practical use in radioactive sources in industrial radiography or sensing. However, since iodine is a component of biological molecules such as thyroid hormones, iodine-131 is of great importance in nuclear medicine, and in medical and biological research as a radioactive tracer.

Lanthanum-140 is a decay product of barium-140, a common fission product. It is a potent gamma emitter. It was used in high quantities during the Manhattan Project for the RaLa Experiments.

Activation products

Some radionuclides, for example cobalt-60 and iridium-192, are made by the neutron irradiation of normal non-radioactive cobalt and iridium metal in a nuclear reactor, creating radioactive nuclides of these elements which contain extra neutrons, compared to the original stable nuclides.

In addition to their uses in radiography, both cobalt-60 (Co-60) and iridium-192 (Ir-192) are used in the radiotherapy of cancer. Cobalt-60 tends to be used in teletherapy units as a higher photon energy alternative to Cs-137, while iridium-192 tends to be used in a different mode of therapy, internal radiotherapy or brachytherapy. The iridium wires for brachytherapy are a palladium-coated iridium/palladium alloy wire made radioactive by neutron activation. This wire is then inserted into a tumor such as a breast tumor, and the tumor is irradiated by gamma ray photons from the wire. At the end of the treatment the wire is removed.

A rare but notable gamma source is sodium-24, this has a very short half-life but it emits photons with very high energies (>2 MeV). It could be used for radiography of thick steel objects if the radiography occurred close to the point of production. In common with Co-60 and Ir-192 it is formed by the neutron activation of the commonly found stable isotope.

Minor actinides

Americium-241 has been used as a source of low energy gamma photons, it has been used in some applications such as portable X-ray fluorescence equipment (XRF).

Natural radioisotopes

Many years ago radium-226 and radon-222 sources were used as gamma-ray sources for industrial radiography: for instance a radon-222 source was used to examine the mechanisms inside an unexploded V-1 flying bomb, while some of the early Bathyspheres could be examined using radium-226 to check for cracks. Because both radium and radon are very radiotoxic and very expensive due to their natural rarity, these natural radioisotopes have fallen out of use over the last half-century, replaced by artificially created radioisotopes.

See also

Wikimedia Foundation. 2010.

См. также в других словарях:

  • Commonly-used gamma emitting isotopes — Fission products Caesium 137 is a radioactive isotope which is formed mainly by nuclear fission. It has a half life of 30 years, and decays by pure beta decay to a metastable state of barium 137 (Ba 137m). Barium 137m has a half life of minutes… …   Wikipedia

  • List of fictional elements, materials, isotopes and atomic particles — This list contains chemical elements, materials, isotopes or (sub)atomic particle that exist primarily in works of fiction (usually fantasy or science fiction). No actual periodic elements end in ite , though many minerals have names with this… …   Wikipedia

  • Radiography — For medical radiography see: RadiologyRadiography is the use of X rays to view unseen or hard to image objects. The main diagnostic purposes of X rays are to see inside ones body, especially of the brain and fetus, where the bones can be viewed… …   Wikipedia

  • Caesium-137 — For the band, see Cesium 137 (band). Caesium 137 Full table General Name, symbol Caesium 137,137Cs Neutrons 82 …   Wikipedia

  • Brachytherapy — (from the Greek brachy , meaning short ), also known as sealed source radiotherapy or endocurietherapy, is a form of radiotherapy where a radioactive source is placed inside or next to the area requiring treatment. Brachytherapy is commonly used… …   Wikipedia

  • Common beta emitters — Contents 1 Fission products 1.1 Strontium 2 Neutron activation products 2.1 Tritium 2.2 Carbon …   Wikipedia

  • actinide element — ▪ chemical element group Introduction       any of a series of 15 consecutive chemical elements in the periodic table from actinium to lawrencium (atomic numbers 89–103). As a group they are significant largely because of their radioactivity.… …   Universalium

  • spectroscopy — spectroscopist /spek tros keuh pist/, n. /spek tros keuh pee, spek treuh skoh pee/, n. the science that deals with the use of the spectroscope and with spectrum analysis. [1865 70; SPECTRO + SCOPY] * * * Branch of analysis devoted to identifying… …   Universalium

  • radiation — radiational, adj. /ray dee ay sheuhn/, n. 1. Physics. a. the process in which energy is emitted as particles or waves. b. the complete process in which energy is emitted by one body, transmitted through an intervening medium or space, and… …   Universalium

  • radiation measurement — ▪ technology Introduction       technique for detecting the intensity and characteristics of ionizing radiation, such as alpha, beta, and gamma rays or neutrons, for the purpose of measurement.       The term ionizing radiation refers to those… …   Universalium

Поделиться ссылкой на выделенное

Прямая ссылка:
Нажмите правой клавишей мыши и выберите «Копировать ссылку»