Comet (sternwheeler)

Comet (sternwheeler)
Career
Name: Comet
Route: Puget Sound, White, Black, and Nooksack rivers
Completed: 1871
Out of service: 1900[1] or early 1880s.[2]
Identification: US registry #5973[1]
Fate: abandoned[1]
General characteristics
Type: inland steamboat
Tonnage: 56.83 regist.[1]
Length: 65 ft (19.81 m)
Installed power: two steam engines, horizontally mounted
Propulsion: sternwheel

Comet was a sternwheel steamboat that ran from 1871 to 1900 on Puget Sound and rivers flowing into it, including the White and Nooksack rivers.

Contents

Construction

The steamboat Comet, whose name was said to have been “misleading”, was built in Seattle in 1871 by Capt. Simon F. Randolph (d.1909). Comet was constructed in an unusual fashion. Randolph built the vessel upside down by picking a flat area of ground, marking out the shape of the boat on the ground, and driving in posts at regular intervals to act as ribs. He then connected the ribs with crossbeams, bent planks around the posts and over the crossbeams, and had the hull complete, although upside down.

With the posts still affixed in the ground, the vessel looked like a potlatch house. Randolph then sawed off the posts, and pushed the hull out into the water. He then flipped the hull over using rocks piled on one side as an assist. The resulting hull was right-side up, but full of water. Randolph then beached the hull, pumped out the water with a home-made wooden pump, and the hull was complete. The steam engines Randolph installed were described as "non-descript and mismatching" and the upper works were said to have been tall and barn-like.[3]

Career

Comet was placed on the White River route under Capt. Curtis D. Brownfield (b.1850) until 1876 or later, and was the first steamer to be successful on that route, which included service to farmlands on the Black River.[4] Comet then was shifted to run almost every route out of Seattle. Under Captain Brownfield, Comet was a pioneer vessel on the Nooksack River.[4] Capt. George A. Cushman (d.1891), who built the steamer Snohomish, La Conner, Whidbey Island, Fidalgo, Bellingham Bay, Semiahmoo Bay, and Lopez, Orcas and San Juan islands.[2]

Notes

  1. ^ a b c d Affleck, ed. Century of Paddlewheelers, at 94.
  2. ^ a b c Wright, ed., Lewis and Dryden Marine History, at 161, 182, 193, 244, 253, 395 .
  3. ^ Newell, Ships of the Inland Sea, at 69-71, and 82.
  4. ^ a b c Newell, ed., H.W. McCurdy Marine History, at 170, 442, and 477.

References



Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Multnomah (sternwheeler) — Multnomah at dock at Three Tree Point, circa 1910 Career …   Wikipedia

  • City of Shelton (sternwheeler) — Career Name: City of Shelton Owner: Shelton Transportation Company Route: Olympia Shelton …   Wikipedia

  • Northern Light (sternwheeler) — Northern Light at a pier. Career Name: Northern Light …   Wikipedia

  • Messenger (sternwheeler) — Career Name: Messenger Route: Puget Sound Completed: 1876 …   Wikipedia

  • Otter (sternwheeler) — Career Name: Otter Route: Puget Sound, Columbia River, Lake Washington, Stikine River In service …   Wikipedia

  • Old Settler (sternwheeler) — Career Name: Old Settler Completed: 1878[1] Identification …   Wikipedia

  • Monte Cristo (sternwheeler) — Monte Cristo on the Skeena River. Career Name: Monte Cristo …   Wikipedia

  • Steamboat — A steamboat or steamship, sometimes called a steamer, is a ship in which the primary method of propulsion is steam power, typically driving a propeller or paddlewheel. The term steamboat is usually used to refer to smaller steam powered boats… …   Wikipedia

  • List of shipwrecks — Contents 1 Africa 1.1 East Africa 1.2 North Africa 1.2.1 Algeria …   Wikipedia

  • Puget Sound Mosquito Fleet — Steamboats at Colman Dock, Seattle, WA, circa 1912. Indianapolis is the large steamer on the right The Puget Sound Mosquito Fleet was a large number of private transportation companies running smaller passenger and freight boats on Puget Sound… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”