Close Quarters Battle Receiver


Close Quarters Battle Receiver
Close Quarter Battle

Receiver[1]

M4A1-CQBR.jpg
Above: An M4A1 with SOPMOD package, including Rail Interface System and Trijicon 4x ACOG. The barrel length is 14.5 inches (370 mm).
Below: An M4A1 with a Close Quarter Battle Receiver. The barrel length is 10.3 inches (260 mm).
Type Assault Rifle
Place of origin  United States of America
Service history
In service 2000-present
Used by See M4 carbine users
Wars War in Afghanistan (2001-present)
Iraq War (2003-2010)
Production history
Designer Colt Defense
Designed 1999
Produced 2000-present
Number built Approx. >10,000
Specifications (CQBR)
Weight 2.7 kg (5.95 lb)
Length 743 mm (29.3 in) stock extended / 667 mm (26.3 in) stock retracted
Barrel length 262 mm (10.3 in)

Cartridge 5.56x45mm NATO
Action gas operated, rotating bolt
Muzzle velocity 800 m/s (2,625 ft/s)
Effective range 300 m (328 yd)
Feed system 20 or 30 round STANAG detachable box magazine

The Close Quarters Battle Receiver (CQBR) is a replacement upper receiver for the M4A1 Carbine. The CQBR replaces the M4 with a barrel 10.3 in (262 mm) length making it the modern equivalent of the Colt Commando short-barrel M16 variants of the past.

Its preliminary National Stock Number was 1005-LL-L99-5996; however, a complete CQBR-equipped carbine now has the NSN 1005-01-527-2288. The overall length of the upper receiver is 19.25 inches (489 mm). With the stock retracted, the overall length of the weapon is 26.25 inches (667 mm). The CQBR entered service in 2000.

Contents

Background

The M4 and M16 are not ideally suited for all missions, so it was proposed that the modularity of the M16 series would allow a user to replace the upper receiver of an existing weapon with one more suitable to the task. One of two proposed special mission receivers that were planned for inclusion into the SOPMOD Block II kit, the CQBR has taken off on its own. Like the proposed Special Purpose Receiver, the Close Quarters Battle Receiver has been more or less taken on by the Naval Surface Warfare Center, Crane Division (often referred to as NSWC-Crane or just "Crane") as its own project following the CQBR's removal from the SOPMOD program. Just as the Special Purpose Receiver morphed into the Special Purpose Rifle, and was type-classified as Mk 12 Mod 0/1, the complete CQBR-equipped carbine has been type-classified as the Mk 18 Mod 0.

The purpose of the CQBR remains to provide operators with a weapon of submachine gun size, but firing a rifle cartridge, for scenarios such as VIP protection, urban warfare, and other close quarters battle (CQB) situations. The CQBR is designed to provide improvement over previous AR-15/M16-type weapons in this category. The CQBR is usually issued as a complete weapon system, and not just an upper receiver. The CQBR was once only available to Naval Special Warfare units, but the Mk 18 Mod 0 has become general issue for Visit, Board, Search, and Seizure (VBSS) missions and, as of 2006, for NCIS agents deploying to active combat zones.[citation needed] The Mk 18 is also used by the Coast Guard's Tactical Law Enforcement Teams, Maritime Safety and Security Teams, and Maritime Security Response Team and the United States Navy's Explosive Ordnance Disposal (EOD) Operators. It is also used by Marine Force Recon's CQB operators, and is in most cases the standard weapons of choice for said operators.

The short 10.3 in (262 mm) barrel length requires special modifications to reliably function. The gas port is opened from 0.062 to 0.070 in (0.16 to 0.18 mm). A one-piece McFarland gas ring replaces the three-piece gas ring set. The standard four-coil extractor spring is replaced with a commercial off-the-shelf (COTS) five-coil spring. An O-ring surrounds the extractor spring. The standard M4 flash hider has been replaced with the M4QD flash hider for suppressor compatibility.

Evolution

Members of the visit, board, search and seizure (VBSS) team practicing aboard the guided-missile destroyer USS Bulkeley (DDG 84).
  • CQBR type 1: Made from M4A1 uppers by shortening the barrels and opening gas ports, no longer produced, STD carbine buffer in use in host lowers at time of fielding.
  • CQBR type 2: NSWC assembled with contracted and /or overhauled parts complete with all accessories to current standards at time of build, will work with H, H2 or H3 balanced to ammo requirements:
    • H okay with M193/M855.
    • H2 needed for MK 262/R2LP & will run M193/M855.
    • H3 may be needed for an extreme case, or when the gas port is eroded but the barrel still groups.
  • CQBR type 2A: NSWC assembled with contracted and /or overhauled parts, naked without any accessories or buffer. The buffer in the host carbine would be used or upgraded as necessary via the supply system same as type 2.
  • CQBR type 3: Colt-contracted upper complete with all accessories. NO buffer supplied. The buffer in the host carbine would be used or upgraded as necessary via the supply system same as type 2.
  • CQBR type 3A: Colt-contracted upper naked without any accessories or buffer supplied. The buffer in the host carbine would be used or upgraded as necessary via the supply system same as type 2.
  • MK18 type 1: NSWC assembled carbine with contracted and /or overhauled parts complete with all accessories to current standards at time of build will work with H or H2 and could have shipped with either. Units will balance buffer to ammo requirements:
    • H okay with M193/M855. (all ship board MK 18’s should have H buffers as this was the standard at the time of assembly).
    • H2 needed for MK 262/ R2LP & will run M193/M855.
    • H3 may be needed for an extreme cases or when the gas port is eroded but the barrel still groups.
  • MK18 type 2: Colt-contracted carbine complete with all accessories H buffer supplied. Units will balance buffer to ammo requirements same as Mk 18 type 1.

Specifications

A member of U.S. Coast Guard MSST 91107 armed with a Mk 18 during a vertical insertion exercise.
Navy SEALs with suppressors.
  • Upper and lower receivers: The lower receiver is a standard M4A1 lower receiver sometimes modified with the addition of a CQD RSM sling adapter plate. However, many CQBR rifles also use surplus M16A1 lower receivers. Internally, the CQBR also takes advantage of a larger gas port and modified bolt carrier and buffer assembly. The gas port has been opened to 0.070 in (0.18 mm). A number of Lewis Machine & Tool 10.5" (266.7 mm) upper receivers have also been reported to have been purchased for the CQBR program. These upper receivers feature a gas system optimized for short barrel use.
  • Sights: Initially, detachable carrying handles cut down so that only the rear sight assembly was used. However, most of these have been replaced with the similar, commercially-made Lewis Machine & Tool adjustable rear sight. Also used are several types of reflex and magnified optics, most commonly seen is the Aimpoint CompM2 in a Wilcox Industries Corp. Picatinny (MIL-STD-1913) mount.
  • Stock: A variety of M4 retractable buttstocks are used on a standard 4-position receiver extension, including the standard "CAR" stock. Most often seen is the SOPMOD stock, often referred to as the "Crane stock", created by Dave Armstrong of NSWC-Crane. The angled stock offers better cheekweld as well as providing two storage compartments for spare batteries. The stock must be removed from the weapon to access the storage compartments. The initial run of stocks was made by NSWC-Crane from glass fiber polymer. Because of this, they were somewhat fragile and did not always properly lock into the receiver extension. A rubber band was used to secure the latch so it would not slide out of the desired position. The current L7LA2B SOPMOD stocks are made by Lewis Machine & Tools and have none of these problems.
  • Barrel: The CQBR uses a 1:7 in (178 mm) twist M4 barrel that has been modified in length to 10.3 in (262 mm). The diameter of the barrel under the handguards is 1.17 in (29.7 mm). The KAC M4-QD flash suppressor is fitted, allowing use of the KAC QDSS-NT4 suppressor (National Stock Number 1005-01-437-0324). Although it has a bayonet lug, the CQBR is not meant to be fitted with any fighting blades.
  • Handguards: The standard handguard for the CQBR is the Knight's Armament Company Rail Interface System (M4 Carbine RIS; National Stock Number 1005-01-416-1089), which is designed for a variety of barrel profiles and allows for the use of any MIL-STD-1913 tactical accessories such as the AN/PEQ-2 infrared pointer, SureFire flashlights, or a vertical forward grip.
  • Ammunition: The CQBR is designed to use standard 5.56x45mm NATO 62-grain M855 FMJ and M856 Tracer ammunition. However, due to the short barrel, the heavier 77-grain Mk 262 cartridge is preferred. There are no plans to rechamber the weapon in any additional calibers.

See also

References

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • M4 carbine — M4A1 redirects here. For the World War II tank, see M4 Sherman. For the World War II rifle, see M4 Survival Rifle. Carbine, 5.56 mm, M4 An M4 with an aftermarket buttstock, Rail Adapter System (RAS), fl …   Wikipedia

  • CQBR — The Close Quarters Battle Receiver (CQBR) is a replacement upper receiver for the M4A1 Carbine. The CQBR upgrades the M4 with a barrel 10.3 in (260 mm) long, the modern equivalent of the Colt Commando short barrel M16 variants of the past.Its… …   Wikipedia

  • Colt Canada C7 rifle — C7 rifle Diemaco C7A1 Assault Rifle Type Assault rifle Place of origin …   Wikipedia

  • FN SCAR — (Mk 16/17 Mod 0) The standard length 3rd Generation SCAR L (top) and SCAR H (bottom). Type Assault rifle (SCAR L) Battle rifle (SCAR H) …   Wikipedia

  • Glossary of military abbreviations — List of terms, acronyms, information, related to modern armour, artillery, infantry, weapons, and related military subject matter.* AA anti aircraft * AAA anti aircraft artillery Triple A * AAAV Advanced Amphibious Assault Vehicle * AAD Armoured… …   Wikipedia

  • Heckler & Koch MP5 — Type Submachine gun Place of origin …   Wikipedia

  • United States Marine Corps Force Reconnaissance — Not to be confused with Marine Division Reconnaissance. Main article: United States Marine Air Ground Task Force Reconnaissance Marine Force Reconnaissance The insignia of Force Recon …   Wikipedia

  • SOPMOD — Special Operations Peculiar Modification Le programme Special Operations Peculiar Modification, ou SOPMOD, est un programme de l armée des États Unis. Il est destiné à uniformiser les armes et accessoires employés parmi les forces spéciales… …   Wikipédia en Français

  • Special Operations Peculiar Modification — Le programme Special Operations Peculiar Modification, ou SOPMOD, est un programme de l armée des États Unis. Il est destiné à uniformiser les armes et accessoires employés parmi les forces spéciales Américaines, les SOF (Forces d opérations… …   Wikipédia en Français

  • M14 rifle — Infobox Weapon name= Rifle, Caliber 7.62 mm, M14 caption=A US Air Force M14 Stand off Munitions Disruptor origin=flag|United States type=Battle rifle is ranged=yes service=1957–present used by=See Users wars=Vietnam War–present designer= design… …   Wikipedia