Chemical process of decomposition

Chemical process of decomposition
Human body composition

Decomposition is a process that begins immediately after death and involves the destruction of soft tissue, leaving behind skeletonized remains. The chemical process of decomposition is complex and involves the breakdown of soft tissue, as the body passes through the sequential stages of decomposition.[1] Autolysis and putrefaction also play major roles in the disintegration of cells and tissues.[2]

The human body is composed of approximately: 64% water, 20% protein, 10% fat, 1% carbohydrate, 5% minerals.[3] The decomposition of soft tissue is characterized by the breakdown of these macromolecules, and thus a large proportion of the decomposition products should reflect the amount of protein and fat content initially present in the body.[4] As such, the chemical process of decomposition involves the breakdown of proteins, carbohydrates, lipids, nucleic acids, and bone.

Contents

Protein degradation

Proteins make up a variety of different tissues within the body, which may be classified as soft or hard tissue proteins. As such, proteins within the body are not degraded at a uniform rate.

Proteolysis

Proteolysis is the process that breaks down proteins. It is regulated by moisture, temperature, and bacteria.[5] This process does not occur at a uniform rate and thus some proteins are degraded during early decomposition, while others are degraded during later stages of decomposition. During the early stages of decomposition, soft tissue proteins are broken down. These include proteins that:

During later stages of decomposition, more resistant tissue proteins are degraded by the effects of putrefaction. These include:

  • reticulin
  • muscle protein
  • collagen (a hard tissue protein), which survives even longer than the former tissue proteins[4]

Keratin is a protein which is found in skin, hair, and nails. It is most resistant to the enzymes involved in proteolysis and must be broken down by special keratinolytic microorganisms.[7] This is the reason that hair and nails are commonly found with skeletal remains.[8]

Proteolysis products

In general, proteolysis breaks down proteins into,[2][4]:

  • proteoses
  • peptones
  • polypeptides
  • amino acids

Continuing proteolysis leads to the production of phenolic substances. In addition, the following gases will also be produced[4]:

Sulfur containing amino acids, such as cysteine, cystine, and methionine, undergo bacterial decomposition to yield[4]:

  • ammonia
  • thiols (decomposition gases known for their foul odours)
  • pyruvic acid
  • sulphides
  • hydrogen sulphide gas
    • Ferrous sulphide will be produced if iron is present, which can be seen as a black precipitate

Two common decarboxylation products of protein associated with decomposition are putrescine and cadaverine. These compounds are toxic and have distinctive, foul odours.[6] It is believed that they are components of the characteristic odours of decomposition commonly detected by cadaver dogs.[2]

A summary of the protein degradation products can be found in Table 1 below.

Nitrogen release

Nitrogen is a component of amino acids and is released upon deamination. It is typically released in the form of ammonia, which may be used by plants or microbes in the surrounding environment, converted to nitrate, or can accumulate in soil (if the body is located on top of or within soil).[4] It has been suggested that the presence of nitrogen in soil may enhance nearby plant growth.[6]

In acidic soil conditions, ammonia will be converted to ammonium ions, which can be used by plants or microbes. Under alkaline conditions, some of the ammonium ions entering soil may be converted back to ammonia. Any remaining ammonium in the environment can undergo nitrification and denitrification to yield nitrate and nitrite. In the absence of nitrifying bacteria, or organisms capable of oxidizing ammonia, ammonia will accumulate in the soil.[4]

Phosphorus release

Phosphorus can be released from various components of the body, including proteins (especially those making up nucleic acids), sugar phosphate, and phospholipids. The route phosphorus takes once it is released is complex and relies on the pH of the surrounding environment. In most soils, phosphorus exists as insoluble inorganic complexes, associated with iron, calcium, magnesium, and aluminum. Soil microorganisms can also transform insoluble organic complexes into soluble ones.[4]

Carbohydrate degradation

Early in decomposition, carbohydrates will be broken down by microorganisms. The process begins with the breakdown of glycogen into glucose monomers.[9] These sugar monomers can be completely decomposed to carbon dioxide and water or incompletely decomposed to various organic acids and alcohols,[2] or other oxygenated species, such as ketones, aldehydes, esters and ethers.[10]

Depending on the availability of oxygen in the environment, sugars will be decomposed by different organisms and into different products, although both routes may occur simultaneously. Under aerobic conditions, fungi and bacteria will decompose sugars into the following organic acids[2]:

Under anaerobic conditions, bacteria will decompose sugars into[2]:

which are collectively responsible for the acidic environment commonly associated with decomposing bodies.[2]

Other bacterial fermentation products include alcohols, such as butyl and ethyl alcohol, acetone, and gases, such as methane and hydrogen.[2]

A summary of the carbohydrate degradation products can be found in Table 1 below.

Lipid degradation

Lipids in the body are mainly contained in adipose tissue, which is made up of about 5-30% water, 2-3% protein, and 60-85% lipids, by weight, of which 90-99% are triglycerides.[2] Adipose tissue is largely composed of neutral lipids, which collectively refers to triglycerides, diglyercides, phospholipids, and cholesterol esters, of which triglycerides are the most common.[11] The fatty acid content of the triglycerides varies from person to person, but contains oleic acid in the greatest amount, followed by linoleic, palmitoleic, and palmitic acids.[12]

Neutral lipid degradation

Neutral fat hydrolysis reaction

Neutral lipids are hydrolyzed by lipases shortly after death, to free the fatty acids from their glycerol backbone. This creates a mixture of saturated and unsaturated fatty acids.[13] Under the right conditions (when sufficient water and bacterial enzymes are present), neutral lipids will be completely degraded until they are reduced to fatty acids. Under suitable conditions, the fatty acids can be transformed into adipocere.[12] In contrast, fatty acids may react with sodium and potassium ions present in tissue, to produce salts of fatty acids. When the body is located near soil, the sodium and potassium ions can be replaced by calcium and magnesium ions to form soaps of saturated fatty acids, which can also contribute to the formation of adipocere.[4]

Fatty acid degradation

The fatty acids resulting from hydrolysis can undergo one of two routes of degradation, depending on the availability of oxygen.[2] It is possible, however, for both routes to take place at the same time in different areas of the body.

Anaerobic degradation

Example of a hydrogenation reaction

Anaerobic bacteria dominate within a body following death, which promote the anaerobic degradation of fatty acids by hydrogenation.[2] The process of hydrogenation transforms unsaturated bonds (double and triple bonds) into single bonds. This essentially increases the amounts of saturated fatty acids, while decreasing the proportion of unsaturated fatty acids. Therefore, hydrogenation of oleic and palmitoleic acids, for example, will yield stearic, and palmitic acids, respectively.[13]

Aerobic degradation

Lipid oxidation process

In the presence of oxygen, the fatty acids will undergo oxidation. Lipid oxidation is a chain reaction process in which oxygen attacks the double bond in a fatty acid, to yield peroxide linkages. Eventually, the process will produce aldehydes and ketones.[4]

A summary of the lipid degradation products can be found in Table 1 below.

Nucleic acid degradation

The breakdown of nucleic acids produces nitrogenous bases, phosphates, and sugars.[10] These three products are further broken down by degradation pathways of other macromolecules. The nitrogen from the nitrogenous bases will be transformed in the same way that it is in proteins. Similarly, phosphates will be released from the body and undergo the same changes as those released from proteins and phospholipids. Finally, sugars, also known as carbohydrates, will be degraded based on the availability of oxygen.

Bone degradation

Bone is a composite tissue that is made up of three main fractions:

Partially skeletonized pig (sus Scrofa)
  1. a protein fraction that mainly consists of collagen (a hard tissue protein that is more resistant to degradation than other tissue proteins), which serves as support
  2. a mineral fraction that consists of hydroxyapatite, which stiffens the protein structure
  3. a ground substance made of other organic compounds

The collagen and hydroxyapatite are held together by a strong protein-mineral bond that provides bone with its strength and its ability to remain long after the soft tissue of a body has been degraded.[4]

The process that degrades bone is referred to as diagenesis. The first step in the process involves the elimination of the organic collagen fraction by the action of bacterial collagenases. These collagenases break down protein into peptides. The peptides are subsequently reduced to their constituent amino acids, which can be leached away by groundwater. Once the collagen has been removed from bone, the hydroxyapatite content is degraded by inorganic mineral weathering, meaning that important ions, such as calcium, are lost to the environment.[4] The strong protein-mineral bond that provided bone with its strength will become compromised by this degradation, leading to an overall weakened structure, which will continue to weaken until full disintegration of bone occurs.[2]

Factors affecting bone degradation

Bone is quite resistant to degradation but will eventually be broken down by physical breaking, decalcification, and dissolution. The rate at which bone is degraded, however, is highly dependent on its surrounding environment. When soil is present, its destruction is influenced by both abiotic (water, temperature, soil type, and pH) and biotic (fauna and flora) agents.[2]

Abiotic factors

Water accelerates the process by leaching essential organic minerals from bone. As such, soil type plays a role, because it will affect the water content of the environment. For example, some soils, like clay soils, retain water better than others, like sandy or silty soils. Further, acidic soils are better able to dissolve the inorganic matrix of hydroxyapatite than basic soils, thus accelerating the disintegration of bone.[2]

Biotic factors

Microorganisms, mainly bacteria and fungi, play a role in bone degradation. They are capable of invading bone tissue and causing minerals to leach into the surrounding environment, leading to disturbances in its structure.[14] Small and large mammals often disturb bones by removing them from grave sites or gnawing on them, which contributes to their destruction.[15] Finally, plant roots located above burial sites can be extremely destructive to bone. Fine roots can travel through the tissue and split long bones, while larger roots can produce openings in bones that may be mistaken for fractures.[2]

Summary of macromolecule degradation products

Table 1. Degradation products of proteins, carbohydrates, and lipids
Proteins Carbohydrates Lipids
Proteoses, peptones, polypeptides, and amino acids Glucose Free fatty acids (saturated and unsaturated)
Phenolic substances and gases Organic acids and alcohols Salts of fatty acids
Organic acids and decarboxylation products Water, carbon dioxide Aldehydes and ketones
Nitrogen and phosphorus Gases Adipocere

References

  1. ^ Clark, M.A., Worrell, M.B., Pless J.E. (1997). "Postmortem changes in soft tissues". In Haglund, W.D., Sorg M.H.. Forensic Taphonomy: The Postmortem Fate of Human Remains. CRC Press. pp. 151–164. ISBN 0849394341. 
  2. ^ a b c d e f g h i j k l m n o Forbes, S.L. (2008). "Decomposition Chemistry in a Burial Environment". In M. Tibbett, D.O. Carter. Soil Analysis in Forensic Taphonomy. CRC Press. pp. 203–223. ISBN 1420069918. 
  3. ^ Janaway R.C., Percival S.L., Wilson A.S. (2009). "Decomposition of Human Remains". In Percival, S.L.. Microbiology and Aging. Springer Science + Business. pp. 13–334. ISBN 1588296407. 
  4. ^ a b c d e f g h i j k l Dent B.B., Forbes S.L., Stuart B.H. (2004). "Review of human decomposition processes in soil". Environmental Geology 45: 576–585. doi:10.1007/s00254-003-0913-z. 
  5. ^ Vass A.A., Barshick S.A., Sega G., Caton J., Skeen J.T., Love J.C. et al. (2002). "Decomposition chemistry of human remains: a new methodology for determining the postmortem interval of human remains". Journal of Forensic Sciences 47 (3): 542–553. doi:10.1520/JFS15294J. PMID 12051334. 
  6. ^ a b c Gill-King, H. (1999). "Chemical and Ultrastructural Aspects of Decomposition". In W.D. Haglund, M.H. Sorg. Forensic Taphonomy: The Postmortem Fate of Human Remains. CRC Press. pp. 93–108. ISBN 0849394341. 
  7. ^ Gupta R., Rammani P. (2006). "Microbial keratinases and their prospective applications: An overview". Applied Microbiology Biotechnology 70 (1): 21–33. doi:10.1007/s00253-005-0239-8. PMID 16391926. 
  8. ^ Wilson, A.S. (2008). "The Decomposition of Hair in the Buried Body Environment". In M. Tibbett, D.O. Carter. Soil Analysis in Forensic Taphonomy. CRC Press. pp. 123–151. ISBN 1420069918. 
  9. ^ Corry, J.E. (1978). "A review: Possible sources of ethanol ante-and post-mortem: Its relationship to the biochemistry and microbiology of decomposition". Journal of Applied Bacteriology 44 (1): 1–56. PMID 344299. 
  10. ^ a b Dekeirsschieter J., Verheggen F.J., Gohy M., Hubrecht F., Bourguignon L., Lognay G., et al. (2009). "Cadaveric volatile organic compounds released by decaying pig carcasses (Sus domesticus L.) in different biotopes". Forensic Science International 189 (1-3): 46–53. doi:10.1016/j.forsciint.2009.03.034. PMID 19423246. 
  11. ^ Ruiz-Gutierrez V., Montero E., Villar J. (1992). "Determination of fatty acid and triacylglycerol composition of human adipose tissue". Journal of Chromatography 581 (2): 171–178. doi:10.1016/0378-4347(92)80269-V. PMID 1452607. 
  12. ^ a b Pfeiffer S., Milne S., Stevenson R.M. (1998). "The natural decomposition of adipocere". Journal of Forensic Sciences 43 (2): 368–370. PMID 9544543. 
  13. ^ a b Notter S.J., Stuart B.H., Rowe R., Langlois N. (2009). "The initial changes of fat deposits during the decomposition of human and pig remains". Journal of Forensic Sciences 54 (1): 195–201. doi:10.1111/j.1556-4029.2008.00911.x. PMID 19018935. 
  14. ^ Piepenbrink H. (1986). "Two examples of biogenous dead bone decomposition and their consequences for taphonomic interpretation". Journal of Archaeological Science 13: 417–430. doi:10.1016/0305-4403(86)90012-9. 
  15. ^ Haglund W.D., Reay D.T., Swindler D.R. (1989). "Canid scavenging/disarticulation sequence of human remains in the Pacific Northwest". Journal of Forensic Sciences 34 (3): 587–606. doi:10.1520/JFS12679J. PMID 2738562. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Browning (chemical process) — Browning is the process of becoming brown, especially referring to food. Browning foods may be desirable, as in caramelization, or undesirable, as in an apple turning brown after being cut. Foods turn brown through an enzymatic or a non enzymatic …   Wikipedia

  • Decomposition — For other uses, see Decomposition (disambiguation). A mummified rat. Stages of death Pallor mortis Algor mortis …   Wikipedia

  • process — pro·cess / prä ˌses, prō / n 1: a continuous operation, art, or method esp. in manufacture whoever invents or discovers any new and useful process...may obtain a patent therefor U.S. Code 2 a: procedure (1) see also …   Law dictionary

  • Process — Proc ess, n. [F. proc[ e]s, L. processus. See {Proceed}.] [1913 Webster] 1. The act of proceeding; continued forward movement; procedure; progress; advance. Long process of time. Milton. [1913 Webster] The thoughts of men are widened with the… …   The Collaborative International Dictionary of English

  • Process milling — Process Proc ess, n. [F. proc[ e]s, L. processus. See {Proceed}.] [1913 Webster] 1. The act of proceeding; continued forward movement; procedure; progress; advance. Long process of time. Milton. [1913 Webster] The thoughts of men are widened with …   The Collaborative International Dictionary of English

  • chemical element — Introduction also called  element,         any substance that cannot be decomposed into simpler substances by ordinary chemical processes. Elements are the fundamental materials of which all matter is composed.       This article considers the… …   Universalium

  • chemical reaction — Any chemical process in which substances are changed into different ones, with different properties, as distinct from changing position or form (phase). Chemical reactions involve the rupture or rearrangement of the bonds holding atoms together… …   Universalium

  • Chemical kinetics — Reaction rate tends to increase with concentration a phenomenon explained by collision theory. Chemical kinetics, also known as reaction kinetics, is the study of rates of chemical processes. Chemical kinetics includes investigations of how… …   Wikipedia

  • chemical reaction — noun (chemistry) a process in which one or more substances are changed into others (Freq. 1) there was a chemical reaction of the lime with the ground water • Syn: ↑reaction • Derivationally related forms: ↑react (for: ↑ …   Useful english dictionary

  • chemical industry — Introduction       complex of processes, operations, and organizations engaged in the manufacture of chemicals and their derivatives.       Although the chemical industry may be described simply as the industry that uses chemistry and… …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”