Microfluidics

Microfluidics

Microfluidics deals with the behavior, precise control and manipulation of fluids that are geometrically constrained to a small, typically sub-millimeter, scale. Typically, micro means one of the following features:

  • small volumes (nl, pl, fl)
  • small size
  • low energy consumption
  • effects of the micro domain

It is a multidisciplinary field intersecting engineering, physics, chemistry, microtechnology and biotechnology, with practical applications to the design of systems in which such small volumes of fluids will be used. Microfluidics emerged in the beginning of the 1980s and is used in the development of inkjet printheads, DNA chips, lab-on-a-chip technology, micro-propulsion, and micro-thermal technologies.

Contents

Microscale behavior of fluids

Silicone rubber and glass microfluidic devices. Top: a photograph of the devices. Bottom: DIC micrographs of a serpentine channel ~15 μm wide.

The behavior of fluids at the microscale can differ from 'macrofluidic' behavior in that factors such as surface tension, energy dissipation, and fluidic resistance start to dominate the system. Microfluidics studies how these behaviors change, and how they can be worked around, or exploited for new uses.[1][2][3][4]

At small scales (channel diameters of around 100 nanometers to several hundred micrometers) some interesting and sometimes unintuitive properties appear. In particular, the Reynolds number (which compares the effect of momentum of a fluid to the effect of viscosity) can become very low. A key consequence of this is that fluids, when side-by-side, do not necessarily mix in the traditional sense; molecular transport between them must often be through diffusion.[5]

High specificity of chemical and physical properties (concentration, pH, temperature, shear force, etc.) can also be ensured resulting in more uniform reaction conditions and higher grade products in single and multi-step reactions.[6][7]

Effects of micro domain

Key application areas

Microfluidic structures include micropneumatic systems, i.e. microsystems for the handling of off-chip fluids (liquid pumps, gas valves, etc.), and microfluidic structures for the on-chip handling of nano- and picolitre volumes.[8] To date, the most successful commercial application of microfluidics is the inkjet printhead. Significant research has been applied to the application of microfluidics for the production of industrially relevant quantities of material.[9]

Advances in microfluidics technology are revolutionizing molecular biology procedures for enzymatic analysis (e.g., glucose and lactate assays), DNA analysis (e.g., polymerase chain reaction and high-throughput sequencing), and proteomics. The basic idea of microfluidic biochips is to integrate assay operations such as detection, as well as sample pre-treatment and sample preparation on one chip.[10][11]

An emerging application area for biochips is clinical pathology, especially the immediate point-of-care diagnosis of diseases. In addition, microfluidics-based devices, capable of continuous sampling and real-time testing of air/water samples for biochemical toxins and other dangerous pathogens, can serve as an always-on "bio-smoke alarm" for early warning.

Continuous-flow microfluidics

These technologies are based on the manipulation of continuous liquid flow through microfabricated channels. Actuation of liquid flow is implemented either by external pressure sources, external mechanical pumps, integrated mechanical micropumps, or by combinations of capillary forces and electrokinetic mechanisms.[12][13] Continuous-flow microfluidic operation is the mainstream approach because it is easy to implement and less sensitive to protein fouling problems. Continuous-flow devices are adequate for many well-defined and simple biochemical applications, and for certain tasks such as chemical separation, but they are less suitable for tasks requiring a high degree of flexibility or ineffect fluid manipulations. These closed-channel systems are inherently difficult to integrate and scale because the parameters that govern flow field vary along the flow path making the fluid flow at any one location dependent on the properties of the entire system. Permanently etched microstructures also lead to limited reconfigurability and poor fault tolerance capability.

Process monitoring capabilities in continuous-flow systems can be achieved with highly sensitive microfluidic flow sensors based on MEMS technology which offer resolutions down to the nanoliter range.

Digital (droplet-based) microfluidics

Alternatives to the above closed-channel continuous-flow systems include novel open structures, where discrete, independently controllable droplets are manipulated on a substrate using electrowetting. Following the analogy of digital microelectronics, this approach is referred to as digital microfluidics. Le Pesant et al. pioneered the use of electrocapillary forces to move droplets on a digital track.[14] The "fluid transistor" pioneered by Cytonix[15] also played a role. The technology was subsequently commercialized by Duke University. By using discrete unit-volume droplets,[16] a microfluidic function can be reduced to a set of repeated basic operations, i.e., moving one unit of fluid over one unit of distance. This "digitization" method facilitates the use of a hierarchical and cell-based approach for microfluidic biochip design. Therefore, digital microfluidics offers a flexible and scalable system architecture as well as high fault-tolerance capability. Moreover, because each droplet can be controlled independently, these systems also have dynamic reconfigurability, whereby groups of unit cells in a microfluidic array can be reconfigured to change their functionality during the concurrent execution of a set of bioassays. Although droplets are manipulated in confined microfluidic channels, since the control on droplets is not independent, it should not be confused as "digital microfluidics". One common actuation method for digital microfluidics is electrowetting-on-dielectric (EWOD). Many lab-on-a-chip applications have been demonstrated within the digital microfluidics paradigm using electrowetting. However, recently other techniques for droplet manipulation have also been demonstrated using Surface Acoustic Waves, optoelectrowetting, mechanical actuation,[17] etc.

DNA chips (microarrays)

Early biochips were based on the idea of a DNA microarray, e.g., the GeneChip DNAarray from Affymetrix, which is a piece of glass, plastic or silicon substrate on which pieces of DNA (probes) are affixed in a microscopic array. Similar to a DNA microarray, a protein array is a miniature array where a multitude of different capture agents, most frequently monoclonal antibodies, are deposited on a chip surface; they are used to determine the presence and/or amount of proteins in biological samples, e.g., blood. A drawback of DNA and protein arrays is that they are neither reconfigurable nor scalable after manufacture. Digital microfluidics has been described as a means for carrying out Digital PCR.

Molecular biology

In addition to microarrays biochips have been designed for two-dimensional electrophoresis,[18] transcriptome analysis,[19] and PCR amplification.[20] Other applications include various electrophoresis and liquid chromatography applications for proteins and DNA, cell separation, in particular blood cell separation, protein analysis, cell manipulation and analysis including cell viability analysis and microorganism capturing.[11]

Evolutionary biology

Three Micro Habitat Patches MHPs connected by dispersal corridors (indicated here as Ji,j) into a 1D lattice. The ecosystem service (of habitat renewal) to each MHP represented here as λi (red arrows). Each MHP can also hold different carrying capacity Ki for its supporting local population of bacterial cells (depicted in green).

By combining microfluidics with landscape ecology and nanofluidics, a nano/micro fabricated fluidic landscape can be constructed by building local patches of bacterial habitat and connecting them by dispersal corridors. The resulting landscapes can be used as physical implementations of an adaptive landscape,[21] by generating a spatial mosaic of patches of opportunity distributed in space and time. The patchy nature of these fluidic landscapes allows for the study of adapting bacterial cells in a metapopulation system. The evolutionary ecology of these bacterial systems in these synthetic ecosystems allows for using biophysics to address questions in evolutionary biology.

Microbial behavior

The ability to create precise and carefully controlled chemoattractant gradients makes microfluidics the ideal tool to study motility and chemotaxis of microorganisms, including bacteria [22] and the broad range of organisms that form the marine microbial loop[23], responsible for regulating much of the oceans' biogeochemistry.

Cellular biophysics

By rectifying the motion of individual swimming bacteria,[24] microfluidic structures can be use to extract mechanical motion from a population of motile bacterial cells.[25] This way, bacteria-powered rotors can be built.[26][27]

Optics

The merger of microfluidics and optics is typical known as optofluidics. An example of an optofluidic device is a Tuneable Microlens Array[28][29]

Acoustic droplet ejection (ADE)

Acoustic droplet ejection uses a pulse of ultrasound to move low volumes of fluids (typically nanoliters or picoliters) without any physical contact. This technology focuses acoustic energy into a fluid sample in order to eject droplets as small as a millionth of a millionth of a liter (picoliter = 10−12 liter). ADE technology is a very gentle process, and it can be used to transfer proteins, high molecular weight DNA and live cells without damage or loss of viability. This feature makes the technology suitable for a wide variety of applications including proteomics and cell-based assays.

Fuel cells

Microfluidic fuel cells can use laminar flow to separate the fuel and its oxidant to control the interaction of the two fluids without a physical barrier as would be required in conventional fuel cells.[30][31][32]

Ceramic Pot Water Filters

In recent times, developing nations are adopting clay based ceramic water filters for cost effective water filtration. These water filters made from molds manufactured by mixing clay and waste plant materials such as rice husk, sawdust,dried plant biomass etc. in some volumetric or weight proportions. These vessels are in use from very early ages in Africa and Asia. The initial water percolation through there clay pots are alkaline. Recently it was found that this alkaline nature can be easily predicted by use of simple models incorporating micro/nano fluid transport processes such as Capillary Osmosis, Thermo Osmosis, Electro-osmosis and Discharge from these clay ceramic devices.[33]

A tool for cell biological research

Microfluidic technology is creating powerful tools for cell biologists to control the complete cellular environement, leading to new questions and new discoveries.[34] We can list here diverse advantages for microbiology of these tools:

  • Microenvironmental control
  • Precise spatiotemporal concentration gradients
  • Mechanical deformation
  • Force measurements of adherent cells
  • Confining cells [35]
  • Exerting a controlled force [35][36]
  • Fast and precise temperature control [37][38]
  • Electric field integration [35]
  • Cell culture

See also

References

  1. ^ S.C.Terry,J.H.Jerman and J.B.Angell:A Gas Chromatographic Air Analyzer Fabricated on a Silicon Wafer,IEEE Trans.Electron Devices,ED-26,12(1979)1880-1886.
  2. ^ Kirby, B.J. (2010). Micro- and Nanoscale Fluid Mechanics: Transport in Microfluidic Devices. Cambridge University Press. http://www.kirbyresearch.com/textbook. 
  3. ^ Karniadakis, G.M., Beskok, A., Aluru, N. (2005). Microflows and Nanoflows. Springer Verlag. 
  4. ^ Bruus, H. (2007). Theoretical Microfluidics. Oxford University Press. 
  5. ^ Tabeling, P. (2005). Introduction to Microfluidics. Oxford University Press. 
  6. ^ Venkatachalam Chokkalingam, Boris Weidenhof, Michael Kraemer, Wilhelm F. Maier, Stephan Herminghaus, and Ralf Seemann,"Optimized droplet-based microfluidics scheme for sol–gel reactions" Lab Chip, 2010, DOI: 10.1039/b926976b.
  7. ^ J Shestopalov, J. D. Tice and R. F. Ismagilov,"Multi-step synthesis of nanoparticles performed on millisecond time scale in a microfluidic droplet-based system" Lab Chip, 2004, 4, 316 - 321, DOI: 10.1039/b403378g.
  8. ^ Nguyen, N.T., Wereley, S. (2006). Fundamentals and Applications of Microfluidics. Artech House. 
  9. ^ Wei Li, Jesse Greener, Dan Voicu and Eugenia Kumacheva "Multiple modular microfluidic (M3) reactors for the synthesis of polymer particles" Lab Chip, 2009, 9, 2715 - 2721, DOI: 10.1039/b906626h.
  10. ^ Herold, KE; Rasooly, A (editor) (2009). Lab-on-a-Chip Technology: Fabrication and Microfluidics. Caister Academic Press. ISBN 978-1-904455-46-2. 
  11. ^ a b Herold, KE; Rasooly, A (editor) (2009). Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. ISBN 978-1-904455-47-9. 
  12. ^ Chang, H.C., Yeo, Leslie (2009). Electrokinetically Driven Microfluidics and Nanofluidics. Cambridge University Press. 
  13. ^ http://www.cytonix.com/fluid%20transistor.html
  14. ^ Le Pesant et al., Electrodes for a device operating by electrically controlled fluid displacement, U.S. Pat. No. 4,569,575, Feb. 11, 1986.
  15. ^ http://www.nsf.gov/awardsearch/piSearch.do;jsessionid=D05E82394F781CBA17DB0C5AC8E3C0B8?SearchType=piSearch&page=1&QueryText=&PIFirstName=james&PILastName=brown&PIInstitution=cytonix&PIState=MD&PIZip=&PICountry=US&RestrictExpired=on&Search=Search#results
  16. ^ V. Chokkalingam, S. Herminghaus, and R. Seemann,"Self-synchronizing Pairwise Production of Monodisperse Droplets by Microfluidic Step Emulsification" Applied Physics Letters 93, 254101, 2008.
  17. ^ J. Shemesh, A. Bransky, M. Khoury, S. Levenberg,"Advanced microfluidic droplet manipulation based on piezoelectric actuation" Biomedical Microdevices DOI 10.1007/s10544-010-9445-y, 2010.[dead link]
  18. ^ Fan et al. (2009). "Two-Dimensional Electrophoresis in a Chip". Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. ISBN 978-1-904455-47-9. 
  19. ^ Bontoux et al. (2009). "Elaborating Lab-on-a-Chips for Single-cell Transcriptome Analysis". Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. ISBN 978-1-904455-47-9. 
  20. ^ Cady, NC (2009). "Microchip-based PCR Amplification Systems". Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. ISBN 978-1-904455-47-9. 
  21. ^ Keymer J.E., P. Galajda, C. Muldoon R., and R. Austin (November 2006). "Bacterial metapopulations in nanofabricated landscapes". PNAS 103 (46): 17290–295. Bibcode 2006PNAS..10317290K. doi:10.1073/pnas.0607971103. 
  22. ^ Ahmed T., T.S. Shimizu, R. Stocker "Microfluidics for bacterial chemotaxis" Integrative Biology, 2010, 2, 604-629, DOI:10.1039/C0IB00049C.
  23. ^ Seymour J.R., R. Simo', T. Ahmed, R. Stocker "Chemoattraction to dimethylsulfoniopropionate throughout the marine microbial food web" Science, 2010, 329, 342–345, DOI:10.1126/science.1188418
  24. ^ Galajda P, J.E. Keymer, P Chaikin, R. Austin (December 2007). "A Wall of Funnels Concentrates Swimming Bacteria". Journal of Bacteriology 189 (23): 8704–8707. doi:10.1128/JB.01033-07. 
  25. ^ Angelani L., R. Di Leonardo, G. Ruocco (2009). "Self-Starting Micromotors in a Bacterial Bath". Phys. Rev. Let. 102: 048104. Bibcode 2009PhRvL.102d8104A. doi:10.1103/PhysRevLett.102.048104. 
  26. ^ Di Leonardo R, L. Angelani , G. Ruocco, V. Iebba, M.P. Conte, S. Schippa, F. De Angelis, F. Mecarini, E. Di Fabrizio (October 2009). "A bacterial ratchet motor". arXiv:Condensed Matter.Statistical Mechanics. 
  27. ^ Sokolova A., M.M. Apodacac, B.A. Grzybowskic, I.S. Aransona (December 2009). "Swimming bacteria power microscopic gears". PNAS 107 (3): 969–974. Bibcode 2010PNAS..107..969S. doi:10.1073/pnas.0913015107. 
  28. ^ Liquid micro-lens array activated by selective electrowetting on lithium niobate substrates S. Grilli, L. Miccio, V. Vespini, A. Finizio, S. De Nicola, and P. Ferraro Optics Express 16, 8084-8093 (2008). http://dx.doi.org/10.1364/OE.16.008084
  29. ^ P. Ferraro, L. Miccio, S. Grilli, A. Finizio, S. De Nicola, and V. Vespini, "Manipulating Thin Liquid Films for Tunable Microlens Arrays," Optics & Photonics News 19, 34-34 (2008) http://www.opticsinfobase.org/abstract.cfm?URI=OPN-19-12-34
  30. ^ Water Management in PEM Fuel Cells[dead link]
  31. ^ Building a Better Fuel Cell Using Microfluidics
  32. ^ Fuel Cell Initiative at MnIT Microfluidics Laboratory
  33. ^ Anand PLAPPALLY, Alfred SOBOYEJO, Norman FAUSEY, Winston SOBOYEJO and Larry BROWN,"Stochastic Modeling of Filtrate Alkalinity in Water Filtration Devices: Transport through Micro/Nano Porous Clay Based Ceramic Materials" J Nat Env Sci 2010 1(2):96-105.
  34. ^ Examples in each list of paper in item Team in:"[1]"
  35. ^ a b c Choi, J.W., Rosset, S., Niklaus, M., Adleman, J.R., Shea, H., Psaltis, D. "3-dimensional electrode patterning within a microfluidic channel using a metal ion implantation", Lab on a Chip 10, 738-788, 2010. http://dx.doi.org/10.1039/B917719A
  36. ^ "Nano today 2010"
  37. ^ "Lab on chip 2011"
  38. ^ "elvebio temperature control system on chip"

Further reading

Review Papers

Books

  • Herold, KE; Rasooly, A (editor) (2009). Lab-on-a-Chip Technology: Fabrication and Microfluidics. Caister Academic Press. ISBN 978-1-904455-46-2. 
  • Herold, KE; Rasooly, A (editor) (2009). Lab-on-a-Chip Technology: Biomolecular Separation and Analysis. Caister Academic Press. ISBN 978-1-904455-47-9. 

External links

Latest articles on Fluidics: http://www.fluidics.eu

Tutorials and summaries


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • microfluidics —  Microfluidics  Микрофлюидика   Междисциплинарная область, исследований, возникшая в начале 80 х годов XX века на пересечении физики, химии, биологии и микротехники. Изучает поведение микролитровых объёмов жидкостей. При таких условиях жидкости… …   Толковый англо-русский словарь по нанотехнологии. - М.

  • microfluidics — noun a) The science concerned with the design and construction of microminiaturized devices containing chambers and tunnels through which fluids flow in a controlled manner; used to construct labs on a chip, ink jet printer heads etc b) The study …   Wiktionary

  • Digital microfluidics — is an alternative technology for lab on a chip systems based upon micromanipulation of discrete droplets. Microfluidic processing is performed on unit sized packets of fluid which are transported, stored, mixed, reacted, or analyzed in a discrete …   Wikipedia

  • List of microfluidics research groups — This list of microfluidics research groups gives a comprehensive overview of academic research organisations in the field of microfluidics, sorted geographically. Any sufficiently notable research group (which in general can be considered as any… …   Wikipedia

  • микрофлюидика —  Microfluidics  Микрофлюидика   Междисциплинарная область, исследований, возникшая в начале 80 х годов XX века на пересечении физики, химии, биологии и микротехники. Изучает поведение микролитровых объёмов жидкостей. При таких условиях жидкости… …   Толковый англо-русский словарь по нанотехнологии. - М.

  • Chemical biology — is a scientific discipline spanning the fields of chemistry and biology that involves the application of chemical techniques and tools, often compounds produced through synthetic chemistry, to the study and manipulation of biological systems.… …   Wikipedia

  • Microfluidique — La microfluidique est la science et la technologie des systèmes manipulant des fluides et dont au moins l une des dimensions caractéristiques est de l ordre du micromètre. Sommaire 1 Définition 2 Développement …   Wikipédia en Français

  • Lab-on-a-chip — This article is about the technology. For the journal, see Lab on a Chip (journal). Lab on a chip made of glass A lab on a chip (LOC) is a device that integrates one or several laboratory functions on a single chip of only millimeters to a few… …   Wikipedia

  • Centrifugal Micro-fluidic Biochip — The centrifugal mico fluidic biochip or centrifugal micro fluidic biodisk is a type of lab on a chip technology that can be used to integrate processes such as separating, mixing, reaction and detecting molecules of nano size in a single piece of …   Wikipedia

  • Microfluidic whole genome haplotyping — is a technique for the physical separation of individual chromosomes from a metaphase cell followed by direct resolution of the haplotype for each allele. Contents 1 Background 1.1 Whole genome haplotyping 1.1.1 Haplotype …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”