Order of battle

Order of battle

In modern use, the order of battle is the identification, command structure, strength, and disposition of personnel, equipment, and units of an armed force participating in field operations. Various abbreviations are in use, including OOB, O/B, or OB, while ORBAT remains the most common in the United Kingdom. An order of battle should be distinguished from a table of organisation, the intended composition of a given unit or formation according to military doctrine and to suit its staff administration operations. As combat continually evolves throughout a campaign, orders of battle may be revised during the course of composing the commanders' after action reports and/or other accounting methods (e.g. despatches) as combat assessment is conducted.

Contents

Historical approaches

In its original form during the Medieval period of European warfare, an order of battle was the order in which troops were positioned relative to the position of the army commander. The term was also applied to the disposition of ships in the line of battle during the age of sail. In the later transformation of its meaning during the European period of Early Modern warfare the order of battle came to mean the order in which the units manoeuvered or deployed onto the battlefield to form battle-lines, with the positioning on the right considered the place of greatest honour. This need to reflect the unit seniority led to the keeping of military staff records, in tabular form reflecting the compilation of units an army, their commanders, equipment, and locations on the battlefield.

During the Napoleonic wars the meaning of the order of battle changed yet again to reflect the changes in the composition of opposing forces during the battle owing to use of larger formations than in the previous century. Napoleon also instituted the staff procedure of maintaining accurate information about the composition of the enemy order of battle, and tables of organisation, and this later evolved into an important function and an organisational tool used by military intelligence to analyse enemy capability for combat.

British historical approach

British military history is the source of some of the earliest orders of battle in the English language, and due to the British Empire's involvement in global conflicts over several centuries the records of historical orders of battle provide an excellent source of study and understanding not only of the composition, but also of tactics and doctrines of the forces through their depiction in the orders of battle. The British Army and UK forces use the acronym ORBAT to describe the structure of both friendly and enemy forces.

Operation Quicksilver, part of the British deception plan for the Invasion of Normandy in World War II, fed German intelligence a combination of true and false information about troop deployments in Britain, causing the Germans to deduce an order of battle which suggested an invasion at the Pas-de-Calais instead of Normandy.

Clausewitz

Clausewitz defined the ‘order of battle’ as “that division and formation of the different arms into separate parts or sections of the whole Army, and that form of general position or disposition of those parts which is to be the norm throughout the whole campaign or war.” Division comes from the permanent peace organisation of the Army, with certain parts such as battalions, squadrons, and batteries being formed into units of higher order up to the highest of all, the whole Army. Disposition comes from the tactics and how these troops are to be drawn up for the battle. Normally these tactics are exercised in peace and can’t be essentially modified when war breaks out. Order of battle belongs more to tactics than strategy. Clausewitz also noted that the order of battle depends on the effective span of control by a commander. Too few subunits makes an army unwieldy; too many subunits makes the ‘power of the superior will’ weak; and in addition every step by which an order has to pass weakens its effect by loss of force and Longer time of transmission. Clausewitz recommended that armies have no more than eight to ten subunits and subordinate corps four to six subunits. [1]

United States Army

In United States Army standard operating procedures, an order of battle to be used for operations planning should relate what an Army unit might be expected to encounter while deployed in the field. The templating of the OOB during maneuvers is typically the responsibility of a battalion or brigade commander, conducted through their Headquarters S-2 (intelligence) sections. Observations about enemy troop movements may be gathered by various military intelligence resources from all echelons, including the employment of any attached special forces units (such as Rangers or LRS teams) as well as Cavalry RSTA squadrons.

From such intelligence data, the OOB section staff compiles a likely order of battle for a planning document or operations order by assessing the following factors:

Enemy's Composition, Disposition, Strength (often mnemonicized with SUALE: Size, Unit, Activity, Location, Equipment):

  • Composition: the command structure and organisation of headquarters and subunits
  • Disposition: geographical locations of unit headquarters and subunits
  • Strength expressed in units and weight of fire delivered by its weapon systems

Enemy capabilities and limitations (often mnemonicized with DRAWD: Defend, Reinforce, Attack, Withdraw, Delay):

  • Personnel training
  • Logistics: how the enemy unit obtains its supplies and lines of communication
  • Combat Effectiveness using complex algorithms and combat modelling applications
  • Electronic Technical Data used to provide data for the combat modelling applications

Enemy's Most Likely Course of Action (EMLCOA):

  • Tactics used by the enemy unit
  • Miscellaneous data related to specific task, mission or operations
  • Personalities (known enemy personnel and their behaviour, often based on communications intelligence analysis)
  • Unit history used to judge expected performance based on its past performance
  • Uniforms and insignia to enable confirmation of the above data


A rule of thumb in American military doctrine is that each unit should keep track of enemy subunits two echelons below its own: that is, a division should monitor enemy units confronting it down to the battalion, a brigade should monitor enemy units down to companies, and a battalion should monitor enemy forces down to platoons. General George S. Patton was one of the first to recommend this practice.[citation needed]

The United States military's intelligence capabilities in the 21st century have allowed for monitoring even further than two echelons down the chain of command. It is quite common for US forces at the battalion level to be able to identify the location and activities of not only enemy forces at the squad level but even individual vehicles.[citation needed] This situational awareness provides a more complete picture of the battlespace for both combatant commanders and tactical commanders.

Up until the end of the Cold War, determining realistic orders of battle was generally an orderly but extremely frustrating process for NATO because although the Warsaw Pact nations had well known doctrines, tactics, techniques and procedures, in actuality, the characteristics of Soviet forces fluctuated often, significantly, and changes often went undetected for years at below-division levels.[citation needed] The intelligence situation for Western militaries has been exacerbated today as they continue to be become engaged in operations against non-traditional enemies (insurgents, guerrillas, etc.) and compiling orders of battle for irregular forces becomes very difficult; the equivalent military intelligence output requiring an increase in acquired data and analysis effort to provide an accurate and timely picture to the commander.

See also

References

  1. ^ pp.272-276, Clausewitz

Sources

  • Carl von Clausewitz, J. J. Graham, Jan Willem Honig. On War. Contributor F. N. Maude, Barnes & Noble Publishing, 2004 ISBN 0760755973

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Order of battle — Order Or der, n. [OE. ordre, F. ordre, fr. L. ordo, ordinis. Cf. {Ordain}, {Ordinal}.] [1913 Webster] 1. Regular arrangement; any methodical or established succession or harmonious relation; method; system; as: (a) Of material things, like the… …   The Collaborative International Dictionary of English

  • order of battle — 1. : a particular disposition of troops or ships made in preparation for combat 2. : a tabular compilation by unit showing organization, commanders, movements, and other details over an extended time * * * order of battle noun Arrangement of… …   Useful english dictionary

  • order of battle — kovos rikiuotė statusas T sritis Gynyba apibrėžtis Bet kokių karinių pajėgų pajėgumų, valdymo struktūros nustatymas ir karių, padalinių, technikos išdėstymas. atitikmenys: angl. order of battle pranc. ordre de bataille …   NATO terminų aiškinamasis žodynas

  • Order of Battle Tianjin–Pukou Railway Operation — Japan 2nd Army – General Toshizō Nishio ( left early Oct. 37),[1] [6] 10th Division (Motorized Square Division)– Gen Rensuke Isogai [6][7] arrived early September) ** 8th Infantry Brigade 39th Infantry Regiment 40th Infantry Regiment 33rd… …   Wikipedia

  • Battle of Saipan order of battle — is a description of the major ground combat formations that participated in the Battle of Saipan during World War II. The battle took place between June 15 and July 9, 1944.Imperial Japanese Army* HQ, 31st Army mdash; Lieutenant General Saito… …   Wikipedia

  • Order of battle for Guangdong Operation — Order of battle for Canton Operation October to December 1938 during the Second Sino Japanese War. JAPAN 21st Army Lt. Gen. Motoo Furusho [8] 5th Division Lt. Gen. Rikichi Ando [8] 9th Infantry Brigade 11th Infantry Regiment 41st Infantry… …   Wikipedia

  • Order of battle for Amoy Operation — May 10 12, 1938 Japan Amoy Operation May 10 12, 1938 [1] 5th Fleet Vice Admiral Koichi Shiozawa [5] 9th Sentai  ? Myōkō [heavy cruiser][2] Armament: 10–20 cm/50cal gun (2x5), 8 12.7 cm/40cal AA gun (2x4), 4 13.2mm AA, 8–61 cm… …   Wikipedia

  • Order of Battle of the Battle of Taiyuan — Order of Battle for the Battle of Taiyuan in the Second Sino Japanese War. Contents 1 Japan 2 China 2.1 Chinese Force Defending Xinkow Line 3 Sources …   Wikipedia

  • Order of Battle Battle of Taiyuan — Order of Battle for the Battle of Taiyuan in the Second Sino Japanese War.JapanNorth China Front Army – Gen. Juichi Terauchi [1] * 1st Army – Gen. Kyoji Kotouki (beginning in November) ** 5th Division – Gen. Seishiro Itagaki (from Sept.) *** 9th… …   Wikipedia

  • Order of Battle: Battle of Guadalajara — Order of Battle for the Spanish Civil War Battle of Guadalajara involving the primarily the forces of the Italian Corpo Truppe Volontarie on the Nationalist side. Nationalists Corpo Truppe Volontarie General de División Mario Roatta 4th Division… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”