Dissolution (chemistry)

Dissolution (chemistry)
Making a saline water solution by dissolving table salt (NaCl) in water. The salt is the solute and the water the solvent.
Gold, formerly dissolved in crystal of pyrite, is left behind after the cubic crystal of pyrite dissolved away. Note a corner of the former cube seen in center of rock.

Dissolution is the process by which a solid, liquid or gas forms a solution in a solvent. In solids this can be explained as the breakdown of the crystal lattice into individual ions, atoms or molecules and their transport into the solvent. For liquids and gases, the molecules must be compatible with those of the solvent for a solution to form. The process of dissolution is governed by the thermodynamic energies involved, such as the heat of solution and entropy of solution. Overall the free energy must be negative for dissolution to occur. In turn, those energies are controlled by the way in which different chemical bond types interact with those in the solvent. Solid solutions occur in metal alloys and their formation and decription is governed by the relevant phase diagram.

Dissolution testing is widely used in the pharmaceutical industry for optimization of formulation and quality control.


Ionic compounds

For ionic compounds, dissolution takes place when the compounds ionize. This most commonly occurs in polar solvents, such as water or ammonia.

NaCl(s) → Na+(aq) + Cl-(aq)

In a colloidal dispersed system, ion dissolution arises, where the dispersed particles exist in equilibrium with their saturated counter part, i.e.

NaCl(s) → Na+(aq) + Cl-(aq)

The behavior of this system is characterised by the activity coefficients of the components and the solubility product, defined as:

a_{Na^ +  }  \cdot a_{Cl^ -  }  = K_{sp}

The ability of an ion to preferentially dissolve (as a result of unequal activities) is classified as the Potential Determining Ion. This in turn results in the remaining particle possessing either a net positive/negative surface charge.

Polar compounds

Other solid compounds experience dissolution as a breakdown of their crystal lattice, and due to their polarity, or non-polarity, mix with the solvent. The solubility of ionic salts in water is generally determined by the degree of solvation of the ions by water molecules. Such coordination complexes occur by water donating spare electrons on the oxygen atom to the ion.


The solubility of polymers depends on the chemical bonds present in the backbone chain and their compatibility with those of the solvent. The Hildebrand solubility parameter is commonly used to evaluate polymer solubility. The closer the value of the parameters, the more likely dissolution will occur.


Compounds in a fluid state may also dissolve in another liquid depending on the compatibility of the chemical and physical bonds in the substance with those of the solvent. Hydrogen bonds play an important role in aqueous dissolution.


Compounds in the gaseous state will dissolve in liquids dependent on the interaction of their bonds with the liquid solvent.

Rate of dissolution

The rate of dissolution depends on:

  • nature of the solvent and solute
  • temperature (and to a small degree pressure)
  • degree of undersaturation
  • presence of mixing
  • interfacial surface area
  • presence of inhibitors (e.g., a substance adsorbed on the surface).

The rate of dissolution can be often expressed by the Noyes-Whitney equation of the form:

\frac {dm} {dt} = A \frac {D} {d} (C_s-C_b)


m - amount of dissolved material, kg
t - time, seconds
A - surface area of the interface between the dissolving substance and the solvent, m2
D - diffusion coefficient, m2/s
d - thickness of the boundary layer of the solvent at the surface of the dissolving substance, m
Cs - concentration of the substance on the surface, kg/m3
Cb - concentration of the substance in the bulk of the solvent, kg/m3

For dissolution limited by diffusion, Cs is equal to the solubility of the substance.

Dissolution rates vary by orders of magnitude between different systems. Usually, substances exhibiting low solubility, exhibit low dissolution rates and vice versa.

See also

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Dissolution — or dissolve may refer to: Dissolution (law), in law, means to end a legal entity or agreement such as a marriage, adoption, or corporation Dissolution (chemistry), or solvation, in chemistry, the process of dissolving a solid substance into a… …   Wikipedia

  • Dissolution of the Soviet Union — Tanks at Red Square during the 1991 Soviet coup d état attempt Participants People of the Soviet Union Federal government …   Wikipedia

  • dissolution — /dɪsəˈluʃən / (say disuh loohshuhn) noun 1. the act of resolving into parts or elements. 2. the resulting state. 3. the undoing or breaking up of a tie, bond, union, etc. 4. the breaking up of an assembly or organisation; dismissal; dispersal. 5 …   Australian English dictionary

  • Analytical chemistry — For the journal, see Analytical Chemistry (journal). Analytical chemistry is the study of the separation, identification, and quantification of the chemical components of natural and artificial materials.[1] Qualitative analysis gives an… …   Wikipedia

  • Soil chemistry — studies the chemical characteristics of soil. Soil chemistry is affected by mineral composition, organic matter and environmental factors.OverviewUntil the late 1960s, soil chemistry focused primarily on chemical reactions in the soil that… …   Wikipedia

  • Glossary of chemistry terms — This page is a glossary of chemistry terms. Chemistry has an extensive vocabulary and a significant amount of jargon. This is a list of chemical terms, including laboratory tools, glassware, and equipment. Chemistry itself is a physical science… …   Wikipedia

  • Liste d'enthalpies de dissolution — Cette liste répertorie l enthalpie de dissolution de quelques substances dans l eau. substance état dilution (mol d H2O par mol de soluté) T° ΔdisH° (calth·mol⁻¹) ΔdisH° (kJ·mol⁻¹) ΔdisH° (kJ·g⁻¹) AlBr3 aq 18°C −357 kJ·mol …   Wikipédia en Français

  • Deposition (chemistry) — In chemistry, deposition is the settling of particles (atoms or molecules) or sediment from a solution, suspension and mixture or vapor onto a pre existing surface. Deposition generally results in growth of new phase and is of fundamental… …   Wikipedia

  • Forensic chemistry — is the application of chemistry to law enforcement or the failure of products or processes. Many different analytical methods may be used to reveal what chemical changes occurred during an incident, and so help reconstruct the sequence of events …   Wikipedia

  • Mass concentration (chemistry) — In chemistry, the mass concentration ρi (or γi) is defined as the mass of a constituent mi divided by the volume of the mixture V:[1] Contents …   Wikipedia