Metal clay

Metal clay
Pendant made from metal clay with gold powder

Metal clay is a crafting medium consisting of very small particles of metal such as silver, gold, platinum, or copper mixed with an organic binder and water for use in making jewelry, beads and small sculptures. Originating in Japan in 1990, metal clay can be shaped just like any soft clay, by hand or using molds. After drying, the clay can be fired in a variety of ways such as in a kiln, with a handheld gas torch, or on a gas stove. The binder burns away, leaving the pure sintered metal. Shrinkage of between 8% and 30% occurs (depending on the product used). Alloys such as bronze or steel also are available.



Metal clay first came out in Japan in 1990[1] to allow craft jewelry makers to make sophisticated looking jewelry without the years of study needed to make fine jewelry.[2]

Silver metal clay

Metal clay and pottery manufacturing

Silver metal clay results in objects containing 99.9% pure silver, which is suitable for enameling. Although gold metal clay is more expensive, it provides richer color. Lump metal clay is sold in sealed packets to keep it moist and workable. The silver versions are also available as a softer paste in a pre-filled syringe which can be used to produce extruded forms, in small jars of slip and as paper-like sheets, from which most of the moisture has been removed. Common brands of silver metal clay include Precious Metal Clay (PMC) and Art Clay Silver (ACS).

Precious Metal Clay (PMC)

PMC was developed in the early 1990s in Japan by metallurgist Masaki Morikawa.[3] As a solid-phase sintered product of a precious metal powder used to form a precious metal article,[1] the material consists of microscopic particles of pure silver or fine gold powder and a water-soluble, non-toxic, organic binder that burns off during firing. Success was first achieved with gold and later duplicated with silver.

The PMC brand includes the following products:

  • The original formula of PMC, now called "standard": fired at 900 °C (1,650 °F) for 2 hours, shrinks by 30% during firing.
  • PMC+: fired at 900 °C (1,650 °F) for 10 minutes or 800 °C (1,470 °F) for 30 minutes; shrinks 15%, due to a particle size reduction. PMC+ is also available in sheet form which can be worked like paper; for example, for origami.
  • PMC3: fired at 599 °C (1,110 °F) for 45 minutes or 699 °C (1,290 °F) for 10 minutes; shrinks by 10%. It can also be fired using a butane torch by heating it to orange heat for at least 2 minutes. It has a longer working life than the older formulations. It is also available in slip and paste forms which can be painted onto the surface of an object to be used as a mould.
  • Aura 22: a 22 k gilding material, a gold paste intended to be painted onto the surface of silver PMC pieces, or ready-made silver objects. [4]
  • PMC Pro: a harder product which is only 0.900 silver, hence it canot be hallmarked as sterling silver. It also requires kiln firing in a tub of activated carbon for 1 hours at 760 °C (1,400 °F).

Art Clay Silver (ACS)

ACS was developed by AIDA Chemical Industries, also a Japanese company. ACS followed PMC Standard with their Art Clay Original clay (more like PMC+ than PMC Standard), which allows the user to fire with a handheld torch or on a gas hob. Owing to subtle differences in the binder and suggested firing times, this clay shrinks less than the PMC versions, approximately 8–10%.

Further developments introduced the Art Clay Slow Dry, a clay with a longer working time. Art Clay 650 and Art Clay 650 Slow Dry soon followed; both clays can be fired at 650 °C (1,202 °F), allowing the user to combine the clay with glass and sterling silver, which are affected negatively by the higher temperatures needed to fire the first generation clays. AIDA also manufacturers Oil Paste, a product used only on fired metal clay or milled fine silver, and Overlay Paste, which is designed for drawing designs on glass and porcelain.

In 2006 AIDA introduced the Art Clay Gold Paste, a more economical way to work with gold. The paste is painted onto the fired silver clay, then refired in a kiln, or with a torch or gas stove. When fired, it bonds with the silver, giving a 22ct gold accent. The same year also saw Art Clay Slow Tarnish introduced, a clay that tarnishes less rapidly than the other metal clays.

Lump metal clays

Lump metal clay in bronze was introduced in 2008 by Metal Adventures Inc. and in 2009 by Prometheus. Lump metal clays in copper were introduced in 2009 by Metal Adventures Inc. and Aida. Because of the lower cost, the bronze and copper metal clays are used by artists[5] more often than the gold and silver metal clays in the American market place. Due to Hallmarking requirements laid out in the UK Bronze and Copper are not regarded as highly. Furthermore, due to the complex firing process and the fact that during the firing process acidic vapour is emitted and can result in extreme wear and tear on your kiln eventually leading to the requirements of a replacement kiln, it is often regarded as not as economically logical to use these cheaper metals. The actual creation time of a PMC Bronze or Copper piece is also far greater than that of its PMC3 counterpart.

Base metal clays

Base metal clays, such as bronze, copper, and steel metal clays are best fired in the absence of oxygen to eliminate the oxidation of copper by atmospheric oxygen. A simple means to accomplish this (place the pieces in activated carbon inside a container) was developed by Bill Struve.[6]


  1. ^ a b U.S. Patent 5,328,775 citing May 18, 1990 (19900518) [JP] Japan 2- 128447.
  2. ^ Musante, Lynda S.; Maria Nerius (2000). Jewelry making for fun & profit. Random House Digital, Inc.. p. ii-iii. ISBN 0761520449. OCLC 410210887. Retrieved March 16, 2011. 
  3. ^ Introduction to Precious Metal Clay by Mary Ann Devos (C)2003 published by Wardell Publications Inc ISBN 0-919985-36-X
  4. ^ McCreight, Tim. "What's New?" Metalsmith Spring 2006, Vol. 26 Issue 1, p42-45, 4p
  5. ^ Metal Clay Artist Magazine 1 (3): 7 
  6. ^ Art Jewelry: 30, July 2008 

External links

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Clay pot cooking — Clay pot Rice With Swamp Eel Clay pot cooking is a technique of cooking food in an unglazed clay pot which has been soaked in water so as to release steam during the cooking process. This technique has a long history, stretching back at least to… …   Wikipedia

  • Clay — puede referirse a: Lugares: Clay, lugar designado por el censo ubicado en el condado de Jefferson en el estado estadounidense de Alabama. Clay, lugar designado por el censo ubicado en el condado de Sacramento en el estado estadounidense de… …   Wikipedia Español

  • Clay Regazzoni — Born 5 September 1939(1939 09 05) Died 15 December 2006(2006 12 15) (aged …   Wikipedia

  • Clay Harvison — Born September 25, 1980 (1980 09 25) (age 31) Marietta, Georgia, U.S. Other names Heavy Metal Nationality American …   Wikipedia

  • Metal Massacre — ist der Name einer Reihe von Kompilationen des US amerikanischen Plattenlabels Metal Blade Records. Inhaltsverzeichnis 1 Entstehungsgeschichte 2 Die Sampler 2.1 Metal Massacre I (1982) …   Deutsch Wikipedia

  • Metal cristiano — White Metal Orígenes musicales Heavy metal, Rock cristiano, Hard rock, Musica cristiana, Glam metal,Surmount darkness Orígenes culturales Mediados de los 80 en EE. UU. Instrumentos c …   Wikipedia Español

  • Clay — For other uses, see Clay (disambiguation). The Gay Head cliffs in Martha s Vineyard consist almost entirely of clay. Clay is a general term including many combinations of one or more clay minerals with traces of metal oxides and organic… …   Wikipedia

  • clay mineral — any of a group of hydrous aluminum silicate minerals, as kaolinite, illite, and montmorillonite, that constitute the major portion of most clays. [1945 50] * * * Any of a group of important hydrous aluminum silicates with a layered structure and… …   Universalium

  • Metal Gear Solid — This article is about the original PlayStation game. For the series, see Metal Gear. For the Game Boy Color game, see Metal Gear Solid (Game Boy). Metal Gear Solid …   Wikipedia

  • Polymer clay — is a sculptable material based on the polymer polyvinyl chloride (PVC). It usually contains no clay minerals, and is only called clay because its texture and working properties resemble those of mineral clay. It is sold in craft, hobby, and art… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.