- Atomic spectral line
physics, atomic spectral linesare of two types:
* An emission line is formed when an electron makes a transition from a particular discrete
energy levelof an atom, to a lower energy state, emitting a photon of a particular energy and wavelength. A spectrum of many such photons will show an emission spike at the wavelength associated with these photons.
* An absorption line is formed when an electron makes a transition from a lower to a higher discrete energy state, with a photon being absorbed in the process. These absorbed photons generally come from background continuum radiation and a spectrum will show a drop in the continuum radiation at the wavelength associated with the absorbed photons.
The two states must be
bound states in which the electron is bound to the atom, so the transition is sometimes referred to as a "bound–bound" transition, as opposed to a transition in which the electron is ejected out of the atom completely ("bound–free" transition) into a continuum state, leaving an ionized atom, and generating continuum radiation.
photonwith an energy equal to the energy difference between the levels is released or absorbed in the process. The frequency at which the spectral line occurs is related to the photon energy by Planck's lawwhere is Planck's constant.
Emission and absorption coefficients
The emission of atomic line radiation may be described by an
emission coefficientwith units of energy/time/volume/solid angle. "ε dt dV dΩ" is then the energy emitted by a volume element in time into solid angle . For atomic line radiation:
where is the density of emitting atoms, is the Einstein coefficient for spontaneous emission, which is fixed for any two energy levels. By Kirchhoff's law, the absorption characteristics in a region of space are closely tied to its emission characteristics, so we must mention the absorption coefficient as well. The absorption coefficient will have units of 1/length and "κ' dx" gives the fraction of intensity absorbed for a light beam at frequency "ν" while traveling distance dx. The absorption coefficient is given by:
where is the spectral intensity of radiation at (and near) frequency , is the density of absorbing atoms, and and are the Einstein coefficients for absorption and induced emission respectively. Like the coefficient , these are also constant for any two energy levels.
In the case of
local thermodynamic equilibrium, the densities of the atoms, both excited and unexcited, may be calculated from the Maxwell-Boltzmann distribution, but for other cases, (e.g. lasers) the calculation is more complicated.
The above equations have ignored the influence of the spectral line shape. To be accurate, the above equations need to be multiplied by the (normalized) spectral line shape, in which case the units will change to include a 1/Hz term.
The Einstein coefficients
Albert Einsteinproposed that there are essentially three processes occurring in the formation of an atomic spectral line. The three processes are referred to as spontaneous emission, induced emission and absorption and with each is associated an Einstein coefficient which is a measure of the probability of that particular process occurring.
Spontaneous emission is the process by which an electron "spontaneously" (i.e. without any outside influence) decays from a higher energy level to a lower one. The process is described by the Einstein coefficient (s-1) which gives the probability per unit time that an electron in state 2 with energy will decay spontaneously to state 1 with energy , emitting a photon with an energy . Due to the energy-time uncertainty principle, the transition actually produces photons within a narrow range of frequencies called the spectral linewidth. If is the number density of atoms in state "i" then the change in the number density of atoms in state 1 per unit time due to spontaneous emission will be:
Stimulated emission(also known as induced emission) is the process by which an electron is induced to jump from a higher energy level to a lower one by the presence of electromagnetic radiation at (or near) the frequency of the transition. The process is described by the Einstein coefficient (sr·m2·Hz·W-1·s-1 = sr·m2·J-1·s-1), which gives the probability per unit time per unit spectral radianceof the radiation field that an electron in state 2 with energy will decay to state 1 with energy , emitting a photon with an energy . The change in the number density of atoms in state 1 per unit time due to induced emission will be:
where is the
spectral radianceof the radiation field at the frequency of the transition (see Planck's law).
Stimulated emission is one of the fundamental processes that led to the development of the
Absorption is the process by which a photon is absorbed by the atom, causing an electron to jump from a lower energy level to a higher one. The process is described by the Einstein coefficient (sr·m2·Hz·W-1·s-1 = sr·m2·J-1·s-1), which gives the probability per unit time per unit
spectral radianceof the radiation field that an electron in state 1 with energy will absorb a photon with an energy and jump to state 2 with energy . The change in the number density of atoms in state 1 per unit time due to absorption will be:
The Einstein coefficients are fixed probabilities associated with each atom, and do not depend on the state of the gas of which the atoms are a part. Therefore, any relationship that we can derive between the coefficients at, say, thermal equilibrium will be valid universally.
At equilibrium, we will have a simple balancing, in which the net change in the number of any excited atoms is zero, being balanced by loss and gain due to all processes. With respect to bound-bound transitions, we will have detailed balancing as well, which states that the net exchange between any two levels will be balanced. This is because the probabilities of transition cannot be affected by the presence or absence of other excited atoms. Detailed balance (valid only at equilibrium) requires that the change in time of the number of atoms in level 1 due to the above three processes be zero:
Along with detailed balancing, we may use our knowledge of the equilibrium energy distribution of the atoms, as stated in the
Maxwell-Boltzmann distribution, and the equilibrium distribution of the photons, as stated in Planck's law of black body radiationto derive universal relationships between the Einstein coefficients.
From the Maxwell-Boltzmann distribution we have for the number of excited atomic specie "i":
where "n" is the total density of the atomic specie, excited and unexcited, "k" is
Boltzmann's constant, "T" is the temperature, is the degeneracy of state "i", and "Z" is the partition function. From Planck's law of black body radiation we have for the spectral radianceat frequency
where is the
speed of lightand is Planck's constant.Note that in some treatments, the blackbody energy density is used rather than the spectral radiance, in which case:
Substituting these expressions into the equation of detailed balancing and remembering that yields:
The above equation must hold at any temperature, so that the three Einstein coefficients are interrelated by:
When this relation is inserted into the original equation, one can also find a relation between and , involving
The oscillator strength is defined by the following relation to the cross section for absorption:
where is the electron charge and is the electron mass. This allows all three Einstein coefficients to be expressed in terms of the single oscillator strength associated with the particular atomic spectral line:
Transition dipole moment
Molecular radiation, continuous spectra emitted by molecules
* [http://www.jobinyvon.com/Emission/Principle Principle of Atomic Emission]
* [http://ioannis.virtualcomposer2000.com/spectroscope/amici.html#colorphotos Emission Spectra from various light sources]
Wikimedia Foundation. 2010.
Look at other dictionaries:
Spectral line — Continuous spectrum Emission line … Wikipedia
Atomic emission spectroscopy — (AES) is a method of chemical analysis that uses the intensity of light emitted from a flame, plasma, arc, or spark at a particular wavelength to determine the quantity of an element in a sample. The wavelength of the atomic spectral line gives… … Wikipedia
Atomic physics — (or atom physics) is the field of physics that studies atoms as an isolated system of electrons and an atomic nucleus. It is primarily concerned with the arrangement of electrons around the nucleus and the processes by which these arrangements… … Wikipedia
Atomic line filter — A potassium Faraday filter designed, built and photographed by Jonas Hedin for making daytime LIDAR measurements at Arecibo Observatory. An atomic line filter (ALF) is an advanced optical band pass filter used in the physical sciences for… … Wikipedia
Atomic orbital — The shapes of the first five atomic orbitals: 1s, 2s, 2px, 2py, and 2pz. The colors show the wave function phase. These are graphs of ψ(x,y,z) functions which depend on the coordinates of one electron. To see the elongated shape of ψ(x,y,z)2… … Wikipedia
Atomic theory — Atomic model redirects here. For the unrelated term in mathematical logic, see Atomic model (mathematical logic). This article is about the historical models of the atom. For a history of the study of how atoms combine to form molecules, see… … Wikipedia
Atomic absorption spectroscopy — In analytical chemistry, atomic absorption spectroscopy is a technique for determining the concentration of a particular metal element in a sample.cite book |author=Sperling, Michael B.; Welz, Bernhard |title=Atomic Absorption Spectrometry… … Wikipedia
Spectral theory — In mathematics, spectral theory is an inclusive term for theories extending the eigenvector and eigenvalue theory of a single square matrix. The name was introduced by David Hilbert in his original formulation of Hilbert space theory, which was… … Wikipedia
Helium line ratio — The brightness of an Atomic spectral line emitted by atoms in a gas (or plasma) can be proportional to the gas s temperature, pressure or a weighted sum of both. Due to the completeness and accuracy of collisional radiative models for helium the… … Wikipedia
Hydrogen line — For hydrogen lines in general, see Hydrogen spectral series. The hydrogen line, 21 centimeter line or HI line refers to the electromagnetic radiation spectral line that is created by a change in the energy state of neutral hydrogen atoms. This… … Wikipedia