Completely randomized design

Completely randomized design

In the design of experiments, completely randomized designs are for studying the effects of one primary factor without the need to take other nuisance variables into account. This article describes completely randomized designs that have one primary factor. The experiment compares the values of a response variable based on the different levels of that primary factor. For completely randomized designs, the levels of the primary factor are randomly assigned to the experimental units.

Contents

Randomization

By randomization, that is to say the run sequence of the experimental units is determined randomly. For example, if there are 3 levels of the primary factor with each level to be run 2 times, then there are 6! (where ! denotes factorial) possible run sequences (or ways to order the experimental trials). Because of the replication, the number of unique orderings is 90 (since 90 = 6!/(2!*2!*2!)). An example of an unrandomized design would be to always run 2 replications for the first level, then 2 for the second level, and finally 2 for the third level. To randomize the runs, one way would be to put 6 slips of paper in a box with 2 having level 1, 2 having level 2, and 2 having level 3. Before each run, one of the slips would be drawn blindly from the box and the level selected would be used for the next run of the experiment.

In practice, the randomization is typically performed by a computer program. However, the randomization can also be generated from random number tables or by some physical mechanism (e.g., drawing the slips of paper).

Three key numbers

All completely randomized designs with one primary factor are defined by 3 numbers:

  • k = number of factors (= 1 for these designs)
  • L = number of levels
  • n = number of replications

and the total sample size (number of runs) is N = k × L × n. Balance dictates that the number of replications be the same at each level of the factor (this will maximize the sensitivity of subsequent statistical t- (or F-) tests).

Example

A typical example of a completely randomized design is the following:

  • k = 1 factor (X1)
  • L = 4 levels of that single factor (called "1", "2", "3", and "4")
  • n = 3 replications per level
  • N = 4 levels × 3 replications per level = 12 runs

Sample randomized sequence of trials

The randomized sequence of trials might look like: X1: 3, 1, 4, 2, 2, 1, 3, 4, 1, 2, 4, 3

Note that in this example there are 12!/(3!*3!*3!*3!) = 369,600 ways to run the experiment, all equally likely to be picked by a randomization procedure.

Model for a completely randomized design

The model for the response is 
Y_{i,j} = \mu + T_i + \mathrm{random\ error}

with

  • Yi,j being any observation for which X1 = i (i and j denote the level of the factor and the replication within the level of the factor, respectively)
  • μ (or mu) is the general location parameter
  • Ti is the effect of having treatment level i

Estimates and statistical tests

Estimating and testing model factor levels

  • Estimate for μ : \bar{Y} = the average of all the data
  • Estimate for Ti : \bar{Y}_i - \bar{Y}

with \bar{Y}_i = average of all Y for which X1 = i.

Statistical tests for levels of X1 are those used for a one-way ANOVA and are detailed in the article on analysis of variance.

Bibliography

  • Caliński, Tadeusz and Kageyama, Sanpei (2000). Block designs: A Randomization approach, Volume I: Analysis. Lecture Notes in Statistics. 150. New York: Springer-Verlag. ISBN 0-387-98578-6. 
  • Christensen, Ronald (2002). Plane Answers to Complex Questions: The Theory of Linear Models (Third ed.). New York: Springer. ISBN 0-387-95361-2. 
  • Kempthorne, Oscar (1979). The Design and Analysis of Experiments (Corrected reprint of (1952) Wiley ed.). Robert E. Krieger. ISBN 0-88275-105-0. 
  • Hinkelmann, Klaus and Kempthorne, Oscar (2008). Design and Analysis of Experiments. I and II (Second ed.). Wiley. ISBN 978-0-470-38551-7. 
    • Hinkelmann, Klaus and Kempthorne, Oscar (2008). Design and Analysis of Experiments, Volume I: Introduction to Experimental Design (Second ed.). Wiley. ISBN 978-0-471-72756-9. 
    • Hinkelmann, Klaus and Kempthorne, Oscar (2005). Design and Analysis of Experiments, Volume 2: Advanced Experimental Design (First ed.). Wiley. ISBN 978-0-471-55177-5. 

See also

External links

 This article incorporates public domain material from websites or documents of the National Institute of Standards and Technology.


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Randomized block design — In the statistical theory of the design of experiments, blocking is the arranging of experimental units in groups (blocks) that are similar to one another. Typically, a blocking factor is a source of variability that is not of primary interest to …   Wikipedia

  • Randomized controlled trial — Flowchart of four phases (enrollment, intervention allocation, follow up, and data analysis) of a parallel randomized trial of two groups, modified from the CONSORT (Consolidated Standards of Reporting Trials) 2010 Statement[1] …   Wikipedia

  • Design of experiments — In general usage, design of experiments (DOE) or experimental design is the design of any information gathering exercises where variation is present, whether under the full control of the experimenter or not. However, in statistics, these terms… …   Wikipedia

  • Optimal design — This article is about the topic in the design of experiments. For the topic in optimal control theory, see shape optimization. Gustav Elfving developed the optimal design of experiments, and so minimized surveyors need for theodolite measurements …   Wikipedia

  • Bayesian experimental design — provides a general probability theoretical framework from which other theories on experimental design can be derived. It is based on Bayesian inference to interpret the observations/data acquired during the experiment. This allows accounting for… …   Wikipedia

  • Combinatorial design — theory is the part of combinatorial mathematics that deals with the existence and construction of systems of finite sets whose intersections have specified numerical properties. For instance, a balanced incomplete block design (usually called for …   Wikipedia

  • statistics — /steuh tis tiks/, n. 1. (used with a sing. v.) the science that deals with the collection, classification, analysis, and interpretation of numerical facts or data, and that, by use of mathematical theories of probability, imposes order and… …   Universalium

  • Restricted randomization — Many processes have more than one source of variation in them. In order to reduce variation in processes, these multiple sources must be understood, and that often leads to the concept of nested or hierarchical data structures. For example, in… …   Wikipedia

  • List of statistics topics — Please add any Wikipedia articles related to statistics that are not already on this list.The Related changes link in the margin of this page (below search) leads to a list of the most recent changes to the articles listed below. To see the most… …   Wikipedia

  • Blocking (statistics) — In the statistical theory of the design of experiments, blocking is the arranging of experimental units in groups (blocks) that are similar to one another. For example, an experiment is designed to test a new drug on patients. There are two… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”