- Copper-chlorine cycle
The copper-chlorine cycle (Cu-Cl cycle) is a four-step thermochemical cycle. It has a maximum temperature requirement of about 530 degrees Celsius. The Cu-Cl cycle is one of the prominent thermochemical cycles under development within the Generation IV International Forum (GIF). Through GIF, over a dozen countries around the world are developing the next generation of nuclear reactors for highly efficient production of both electricity and hydrogen.
The Cu-Cl cycle involves four chemical reactions for water splitting, whose net reaction decomposes water into hydrogen and oxygen. All other chemicals are recycled. The Cu-Cl process can be linked with nuclear plants and/or other heat sources such as solar and industrial waste heat (i.e., incinerators, chemical plants or lost energy from furnaces) to potentially achieve higher efficiencies, lower environmental impact and lower costs of hydrogen production than any other conventional technology.
The Cu-Cl cycle is a hybrid process that employs both thermochemical and electrolysis steps.
- 2 Cu + 2 HCl(g) → 2 CuCl(l) + H2(g) (430–475 °C)
- 2 Cu2OCl2 → 4 CuCl + O2(g) (500 °C)
- 2 CuCl2 + H2O(g) → Cu2OCl2 + 2 HCl(g) (400 °C)
- 2 CuCl → CuCl2(aq) + Cu (ambient-temperature electrolysis)
- Net reaction: 2 H2O → 2 H2 + O2
Legend: (g)—gas; (l)—liquid;(aq)—aqueous solution; the balance of the species are in a solid phase. Atomic Energy of Canada Limited has demonstrated experimentally a CuCl electrolyzer in which hydrogen is produced electrolytically at the cathode and Cu(I) is oxidized to Cu(II) at the anode, thereby combining above steps 1 and 4 to eliminate the intermediate production and subsequent transport of solid copper.
Advantages and disadvantages
Advantages of the copper-chlorine cycle include lower operating temperatures, the ability to use low-grade waste heat to improve energy efficiency, and potentially lower cost materials. In comparison with other thermochemical cycles, the Cu-Cl process requires relatively low temperatures of up to 530 °C (990 °F).
Another significant merit of this cycle is a relatively low voltage (thus low electrical energy expenditure) that is required for the electrochemical step (0.6 to 1.0 V, perhaps even 0.5 if lower current density can be achieved). The overall efficiency of the Cu-Cl cycle has been estimated to be just over 43%, excluding the additional potential gains of utilizing waste heat in the cycle.
Solids handling between processes and corrosive working fluids present unique challenges for the engineering equipment development. Among others, the following materials are being currently used: spray coatings, nickel-based alloys, glass-lined steel, refractory materials, and other advanced materials.
- Cerium(IV) oxide-cerium(III) oxide cycle
- Hybrid sulfur cycle
- Iron oxide cycle
- Sulfur-iodine cycle
- Zinc zinc-oxide cycle
- ^ Solar power for thermochemical production of hydrogen
- ^ Rosen, M.A., Naterer, G.F., Sadhankar, R., Suppiah, S., "Nuclear-Based Hydrogen Production with a Thermochemical Copper-Chlorine Cycle and Supercritical Water Reactor", Canadian Hydrogen Association Workshop, Quebec, October 19 – 20, 2006. (PDF).
- ^ Lewis, M. and Masin, J., "An Assessment of the Efficiency of the Hybrid Copper-Chloride Thermochemical Cycle", Argonne National Laboratory, University of Chicago, 2 November 2005. (PDF).
- ^ Naterer, G. F.; et al. (2009). "Recent Canadian Advances in Nuclear-Based Hydrogen Production and the Thermochemical Cu-Cl Cycle". International Journal of Hydrogen Energy 34 (7): 2901–2917. doi:10.1016/j.ijhydene.2009.01.090.
- ^ Dokiya, M.; Kotera, Y. (1976). "Hybrid Cycle with Electrolysis Using Cu-Cl System". International Journal of Hydrogen Energy 1 (2): 117–121. doi:10.1016/0360-3199(76)90064-1. http://hydrogen.uoit.ca/assets/Default/documents/Public/hybridCuCl.pdf.
- ^ Chukwu, C., Naterer, G. F., Rosen, M. A., "Process Simulation of Nuclear-Produced Hydrogen with a Cu-Cl Cycle", 29th Conference of the Canadian Nuclear Society, Toronto, Ontario, Canada, June 1–4, 2008. 
- ^ Hydrogen Website of UOIT (University of Ontario Institute of Technology)
Wikimedia Foundation. 2010.
Look at other dictionaries:
Copper(II) chloride — Anhydrous Anhydrous … Wikipedia
Cerium(IV) oxide-cerium(III) oxide cycle — Simplified diagram of the Cerium(IV) oxide cerium(III) oxide cycle The cerium(IV) oxide cerium(III) oxide cycle or CeO2/Ce2O3 cycle is a two step thermochemical process based on cerium(IV) oxide and cerium(III) oxide for hydrogen production. … Wikipedia
Hydrogen — This article is about the chemistry of hydrogen. For the physics of atomic hydrogen, see Hydrogen atom. For other meanings, see Hydrogen (disambiguation). ← hydrogen → helium … Wikipedia
Hydrogen production — Hydrogen is commonly produced by extraction from hydrocarbon fossil fuels via a chemical path. Hydrogen may also be extracted from water via biological production in an algae bioreactor, or using electricity (by electrolysis), chemicals (by… … Wikipedia
Hydrogen economy — The hydrogen economy is a proposed system of delivering energy using hydrogen. The term hydrogen economy was coined by John Bockris during a talk he gave in 1970 at General Motors (GM) Technical Center. Hydrogen advocates promote hydrogen as… … Wikipedia
Christmas tree cultivation — A Christmas tree farmer in the U.S. state of Florida explains the pruning and shearing process of cultivation to a government employee. Christmas tree cultivation is an agricultural, forestry, and horticultural occupation which involves growing… … Wikipedia
oxidation–reduction reaction — ▪ chemical reaction Introduction also called redox reaction any chemical reaction in which the oxidation number of a participating chemical species changes. The term covers a large and diverse body of processes. Many oxidation– reduction… … Universalium
Business and Industry Review — ▪ 1999 Introduction Overview Annual Average Rates of Growth of Manufacturing Output, 1980 97, Table Pattern of Output, 1994 97, Table Index Numbers of Production, Employment, and Productivity in Manufacturing Industries, Table (For Annual… … Universalium
metallurgy — metallurgic, metallurgical, adj. metallurgically, adv. metallurgist /met l err jist/ or, esp. Brit., /meuh tal euhr jist/, n. /met l err jee/ or, esp. Brit., /meuh tal euhr jee/, n. 1. the technique or science of working or heating metals so as… … Universalium
Nutrition — The Nutrition Facts table indicates the amounts of nutrients which experts recommend to limit or consume in adequate amounts. Nutrition (also called nourishment or aliment) is the provision, to cells and organisms, of the materials necessary (in… … Wikipedia