Supercritical drying

Supercritical drying
Supercritical drying (red arrow) goes beyond the critical point of the working fluid in order to avoid the direct liquid–gas transition seen in ordinary drying (green arrow) or the two phase changes in freeze drying (blue arrow).

Supercritical drying is a process to remove liquid in a precisely controlled way. It is useful in the production of microelectromechanical systems (MEMS), the drying of spices, the production of aerogel, and in the preparation of biological specimens for scanning electron microscopy.

As the substance in a liquid body crosses the boundary from liquid to gas (see green arrow in phase diagram), the liquid changes into gas at a finite rate, while the liquid body's volume decreases. When this happens within a heterogeneous environment, surface tension in the liquid body pulls against any solid structures the liquid might be in contact with. Delicate structures such as cell walls, the dendrites in silica gel, and the tiny machinery of microelectromechanical devices, tend to be broken apart by this surface tension as the liquid–solid interface moves by.

To avoid this, the sample can be brought via two possible alternate paths from the liquid phase to the gas phase without crossing the liquid–gas boundary on the phase diagram. In freeze-drying, this means going around to the left (low temperature, low pressure; blue arrow). However, some structures are disrupted even by the solid–gas boundary. Supercritical drying, on the other hand, goes around the line to the right, on the high-temperature, high-pressure side (red arrow). This route from liquid to gas does not cross any phase boundary, instead passing through the supercritical region, where the distinction between gas and liquid ceases to apply. Densities of the liquid phase and vapor phase becomes equal at critical point of drying.

Phase diagram showing the supercritical region (light blue) of carbon dioxide.

Fluids suitable for supercritical drying include carbon dioxide (critical point 304.25 K at 7.39 MPa or 31.1 °C at 1072 psi) and freon (≈300 K at 3.5–4 MPa or 25–0 °C at 500–600 psi). Nitrous oxide has similar physical behavior to carbon dioxide, but is a powerful oxidizer in its supercritical state. Supercritical water is also a powerful oxidizer, partly because its critical point occurs at such a high temperature (647 K, 374 °C) and pressure (22.064 MPa, 3212 psi).[1]

In most such processes, acetone is first used to wash away all water, exploiting the complete miscibility of these two fluids. The acetone is then washed away with high pressure liquid carbon dioxide, the industry standard now that freon is unavailable. The liquid carbon dioxide is then heated until its temperature goes beyond the critical point, at which time the pressure can be gradually released, allowing the gas to escape and leaving a dried product.

References

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Supercritical — may refer to:* Critical mass, the smallest amount of fissile material needed for a sustained nuclear chain reaction * Critical temperature, Tc, the temperature above which distinct liquid and gas phases do not exist * Supercritical fluid, a… …   Wikipedia

  • Supercritical fluid — A supercritical fluid is any substance at a temperature and pressure above its thermodynamic critical point. It can diffuse through solids like a gas, and dissolve materials like a liquid. Additionally, close to the critical point, small changes… …   Wikipedia

  • Drying — For the food conservation method, see drying (food). Drying is a mass transfer process consisting of the removal of water or another solvent [1] by evaporation from a solid, semi solid or liquid. This process is often used as a final production… …   Wikipedia

  • Freeze drying — (also known as lyophilization or cryodesiccation) is a dehydration process typically used to preserve a perishable material or make the material more convenient for transport. Freeze drying works by freezing the material and then reducing the… …   Wikipedia

  • Porous silicon — (pSi) is a form of the chemical element silicon which has an introduced nanoporous holes in its microstructure, rendering a large surface to volume ratio in the order of 500m2/cm3. History Porous silicon was first discovered by accident in 1956… …   Wikipedia

  • Aerogel — is a low density solid state material derived from gel in which the liquid component of the gel has been replaced with gas. The result is an extremely low density solid with several remarkable properties, most notably its effectiveness as a… …   Wikipedia

  • Critical point (thermodynamics) — Carbon dioxide creating a fog when cooling from supercritical to critical temperature In physical chemistry, thermodynamics, chemistry and condensed matter physics, a critical point, also called a critical state, specifies the conditions… …   Wikipedia

  • Carbon dioxide — Carbon dioxide …   Wikipedia

  • Industrial process — Industrial processes are procedures involving chemical or mechanical steps to aid in the manufacture of an item or items, usually carried out on a very large scale.Industrial processes are the key components of heavy industry.Most processes make… …   Wikipedia

  • Aerogel — Aérogel Une pièce d aérogel pesant 2 grammes soutient une brique de 2,5 kg. Un aérogel est un matériau semblable à un gel où le composant liquide est remplacé par du gaz. C est un solide à très faible densité avec plusieurs propriétés… …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”